PBM-4500

The PBM 4500 machine comes with a torque accepting mandrel, built with a worm gear drive unit for extra torque to handle extra thick pipe walls.

Our machines are the only machines on the market that can bevel, face, and counter-bore 1inch  wall - worry free from damaging the gears.

 為了應對超厚管壁所需的大扭矩，這款4 ”的坡口機含有抗扭轉心軸，以及蝸輪蝸桿組件 。
PBM4500坡口機能夠同時對管件進行坡口、平口及內徑鏜孔。渦輪渦桿組件提供的大扭矩最厚可以加工壁厚達1”的管件。同樣的，這有利于防止損壞齒輪結構。

PERFORMANCE:

Lock in mandrel blades (no springs to lose)

Adjustable keyway on machine and mandrel (eliminates backlash and chatter)

1 hp pneumatic motor

24 lbs. approximate working weight

Hardened mandrel 55 Rc. (less chance of gouging with metal chips)

Three slots to do beveling, facing, deburring or counter-boring

Single mandrel with mandrel blades to cover size ranges

 特征:

TECHNICAL SPECS:

Size range 1.25  to 4 inches Pipe (31.74 mm -101.6 mm)

Max wall thickness to 1inch

Air Power requirements: 70 cfm at 90 psi.

For PBM-4500 accessories, please visit our website or contact our sales department for further assistance.