OD MOUNT / BATTERY 外夾式充電電池驅動
TSM-1000 is one of the smallest designed facing tools on the market today. The machine is powered by an air cooled 18V-Li Metabo battery motor and the total working weight of the machine is 6 lbs. The design of this machine makes it easy to use on job sites – making hard-to-reach areas easily accessible due to it’s small size. It has a battery powered motor, which will last for 2+ hours, with a 15 min. recharge. Collets are made from Stainless Steel material and are self-locking into the cutter to hold the collets in place.
TSM-1000便攜式平口機是目前市場上最小的平口機之一。該機型由18V的Metabo鋰電池電鉆驅動，整機的重量約為6磅（2.6KG）。這種機型適用于安裝施工現場，由于它的尺寸很小，尤其方便在空間窄小的區域工作。 電鉆通過電池驅動可以持續工作2個小時以上，并且充電時間只要15分鐘。夾具由不銹鋼制作成，并且可以自鎖于排屑 套筒上將夾具固定在正確位置。
PERFORMANCE
• Size range 1/8” to 1” (3.175 mm - 25.4 mm)
• 18V Metabo air cooled Li powered battery motor
• Easy replacement of collets and size ranges
• Uses Stainless Steel collet set (upper / lower)
• 6 lbs. (2.6 kg) approximate working weight
• Faces most metals and plastics, including high nickel materials
• Tool bit designed to keep chip out of polished ID
• Tool bits are designed to work on the following materials: stainless steel, inconel, hastelloy, carbon steels, aluminum, and a variety of other alloys.
性能 :
管徑范圍（外徑）：1/8〞-1〞(3.175mm-25.4mm)；
18V的Metabo鋰電池電鉆驅動；
兩面式刀片讓刀片壽命更長；
夾具使用不銹鋼材料，尺寸多且更換方便；
重量約6磅（2.6公斤），方便現場操作；
可以切削大多數的金屬和塑膠，包括高鎳合金材料；
設計的刀片使切屑避開管內壁；
刀片可以切削以下幾種材料：不銹鋼，鉻鎳鐵合金，鎳基合金，碳鋼，鋁合金以及其他的一些合金材料
• Battery charger: 電鉆
110V;60Hz US Style / 220V;50Hz CE Compliant110V
交流；60Hz 美國標準/220V 交流；50Hz 通過CE認證
PART NUMBERS / ORDER INFO:
配件型號/訂單信息
TSM-1000 Machine Kit Includes: Machine, Battery charger，Standby battery, Tool Bits(2), Tooling, Manual and Case
標配： 平口機，充電器，備用電池，2個隨機刀片，工具，手冊和特制手提箱
