OD MOUNT / ELECTRIC 外夾緊式電動驅動
This new facing tool will face tubing from 1/2" to 3” and is designed like our TSM-4500M, but lighter in weight, approximately 19 lbs. This tool was designed with our Pharmaceutical contractors in mind. Our feed knob will give you the control you need to ensure precise lengths. This machine comes with a Metabo motor with speed control that will keep the RPM constant under load. This speed control will help extend the life of your tool bits.
這款端面平口機機器可切削外徑范圍為0.5〞到3〞(12.7mm-76.2mm)，十分類似TSM-4500M，但是重量更輕。主要應用于制藥等精密機械行業。進給旋鈕方便你精確控制進給量。機器配置德國麥太保可調速電鉆，可以在加載條件下保持恒定轉速，延長刀具壽命。
PERFORMANCE
• Size range .5” to 3” (12.7 mm - 76.2 mm)
• 110V variable speed control motor with electronic feedback maintains constant RPM under load
• Less than 20” in length and 8” in overall height
• Quick close latching system reduces setup time
• Easy replacement of collets and size ranges
• Adjustable measure indicator for accurate facing 0.001” or longer
• Large view port for easy bit replacement
• Faces most metals and plastics, including high nickel and carbon steel materials
• Tool bit designed to keep chip out of polished ID
特性：
管徑范圍（外徑）： 0.5〞-3〞（12.7mm-76.2mm）
標準220V變速控制電鉆，其電反饋可保持加載下的轉速恒定 機身長度小于20〞（508mm），高度小于8〞(203.2mm)
快速鎖緊系統減少裝、夾時間，方便更換不同尺寸夾具
工作重量約18磅(8.16公斤) 進給刻度盤能夠精確控制進給到0.001〞（0.0254mm）
隨機配置臺面固定底座
可以切割大部分金屬和塑料，包括高鎳合金鋼和碳鋼等
刀具設計使切屑避開管內壁
3"的管子不需要另配夾具
PART NUMBERS / ORDER INFO:
配件型號/訂單信息
TSM-3001M Machine Kit Includes: Machine, Tool Bits(2), Tooling, Manual and Case
標配： 平口機，2個隨機刀片，工具，手冊和特制手提箱
