TSM-6000
This lightweight 42 lb. Facing Machine has a wide working range of 1 to 6.625 inches OD. With our machine you do not have to change adapters if you change tubing size.
Size range 1 to 6.625 inches (25.4 mm - 168.3 mm)
管徑范圍: 1” (50.8mm) 到 6.625” (168.3mm)
該機型重量為42磅（19.05公斤），切割的管徑范圍為1 ” 到 6.625” 。管子更換時不必更換連接塊，這一點不同于市場上的其他一些機器 。
PERFORMANCE:
110V variable speed control motor with electronic feedback maintains constant RPM under load
Rugged two speed design to fit more applications
Quick close latching system reduces setup time
Comes with bench stand
Easy replacement of collets and size ranges
42 lbs. approximate working weight
Adjustable measure indicator for accurate facing 0.001 inches or longer
Large view port for easy bit replacement
Faces most metals and plastics, including high nickel and carbon steel materials
Tool bit designed to keep chip out of polished ID
基本特征：
•設計用于切削短管以及長度在1”到6.625” （25.4mm 到 168.3mm）范圍內的管件 。
•帶有電子反饋功能的重型負載220V變速電機，使得電機轉速在不同的載荷下保持恒定轉速
•既可作為便攜式又可安裝在臺面用作批量生產
•大觀察孔提供最大的觀察區間且便于刀具更換
•通過刀具的設計，切屑避開了拋光的管內圓
•可調測量指示刻度用于更精確的平口切削，最小刻度值為0.0254mm(0.001”)
•快速鎖緊機構節省了大量安裝時間
•彈性夾具提高了不圓的管件的定位精度和夾持可靠性
•刀架上帶有刻度，使刀具位置確定極其方便
•隨機配置臺面固定底座
For TSM-6000 accessories, please visit our website or contact our sales department for further assistance.
