AKLC400藍寶石切削液 AKLC400半導體切削液 AKLC400太陽能硅片切削液
藍寶石切削液 半導體切削液 太陽能硅片切削液
Application: Diamond Wire Sawing Process
用途：金剛石線鋸流程
AKLC400 Coolant- lubricant is a biodegradable water based, non caustic material
AKLC400系列冷卻劑-潤滑劑是一種可生物降解、水性、非堿性物質
Dilution ratio of DI /RO water: Slicing Fluid is 10:1 - 50 :1
去離子水/反滲透水溶液比例:切片液 - 10:1至50:1
Effectively reduces the surface tension of cutting/slicing water solution to about 22.0 mN/m
能夠有效地將切削/切片水溶液的表面張力降低到大約22.0 mN/m
Increases heat transfer (heat dissipation) hence reduces thermal stress
可以加快傳熱(散熱)速度，減少生熱和熱應力
Outstanding wetting and rinsing properties
極好的濕潤和沖洗功能
Environmental Benefits and Cost
環保優勢和成本
Biodegradable, non-hazardous and hence easily disposable
可生物降解、無危害，可以很容易進行處置
Biochemical Oxygen Demand (BOD) < 2.0 mg/L (BOD less than 2.0 mg/L)
生化需氧量(BOD) < 2.0 mg/L (BOD小于2.0 mg/L)
Chemical Oxygen Demand (COD) < 10.0 mg/L (COD less than 10.0 mg/L)
化學需氧量(COD) < 10.0 mg/L (COD小于10.0 mg/L)
Elimination of Slurry management
不必進行砂漿管理
No PEG & SiC hazardous waste management
不必進行聚乙二醇(PEG)和碳化硅(SiC)等危險廢物管理
該產品用于藍寶石多線切割，能有效延長金鋼線的使用壽命，降低生產成本
專業代理美國UDM硅片切削液 藍寶石切削液 藍寶石切割液 晶體切割液 晶體切削液
