供應rohmhaas AMBERJET樹脂

羅門哈斯rohmhaas AMBERJET樹脂： UP6040
                                             Cation H+       Anion OH-
Moisture holding capacity, %________________ 44.0 - 51.0     54.0 - 60.0
Total exchange capacity, eq/L_______________ ≥ 2.00         ≥ 1.10
Uniformity coefficient _____________________ ≤ 1.20         ≤ 1.20
H form % of sites __________________________ ≥ 99           -
OH form % of sites__________________________ -               ≥ 95.0
Cl form, % of sites ________________________ -               ≤ 0.5
CO3 form % of sites ________________________ -               ≤ 5.0
SO4 form % of sites ________________________ -               ≤ 0.1

Feed water temperature______________________ 15 to 25°C (60 to 77°F)
Minimum bed depth __________________________ 900 mm (3 feet)
Service flow rate___________________________ 30 to 50 BV*/h
Recommended influent water quality
Inlet Resistivity___________________________ > 17 MΩ·cm
Inlet Silica________________________________ < 2 ppb
Inlet Total Organic Carbon__________________ < 15 ppb

-----------------------------------------------------------------------
羅門哈斯rohmhaas AMBERJET樹脂：UP6150

                                             Cation H+       Anion OH-
Moisture holding capacity, %________________ 44.0 - 54.0     54.0 - 64.0
Total exchange capacity, eq/L_______________ ≥ 1.80         ≥ 1.00
Harmonic mean size, μm ____________________ 580 to 680      580 to 690
Uniformity coefficient _____________________ ≤ 1.20         ≤ 1.25
H form % of sites __________________________ ≥ 99           -
OH form % of sites__________________________ -               ≥ 95.0
Cl form, % of sites ________________________ -               ≤ 0.5
CO3 form % of sites ________________________ -               ≤ 5.0
SO4 form % of sites ________________________ -               ≤ 0.1

Feed water temperature______________________ 15 to 25°C (60 to 77° F)
Minimum bed depth __________________________ 900 mm (3 feet)
Service flow rate (working mixed bed) ______ 20 to 30 BV*/h
Service flow rate (polishing mixed bed)_____ 30 to 40 BV/h
Recommended influent water quality
for polishing mixed bed application
Inlet Resistivity___________________________ > 16 MΩ·cm
Inlet Silica________________________________ < 5 ppb
Inlet Total Organic Carbon__________________ < 20 ppb
-------------------價格確認請來電洽談，謝謝垂尋。