NJGC系列耐壓式稱重給煤機
NJGC series pressure type coal weighing feeder
一、產品概述product introduction
? ?NJGC型耐壓式稱重給煤機是火力發電廠燃煤鍋爐與循環硫化床鍋爐配套的理想設備。具有連續給煤、動態計量、精度高、并能有效匹配鍋爐運行狀態，自動控制熱風反竄，使系統運行更為安全可靠，為現場管理、操作提供準確可靠的計量數據和控制手段，是適應鍋爐運行工藝的先進計量給煤設備。
NJGC type pressure coal weighing feeder is coal-fired boiler matched with the circulating fluidized bed boilers ideal equipment of thermal power plant. With continuous feeding, dynamic state measurement, high precision, and can effectively match the running state of the boiler, automatic control of hot air anti channeling, to make the system more safe and reliable, supply the reliable accurate measurement data and control ?way for site management, operation, is the advanced metering boiler operation process of coal weighing feeder equipment.
二、工作原理work principle
當煤通過控制閘門進入給煤機，皮帶上煤的重量信號和皮帶運行的速度信號一同傳送到微處理控制器，自動計算出煤的瞬時流量。通過連續不斷的比較設定流量與實際煤的瞬時流量，從而調節皮帶運行的速度，使實際煤流量保持在設定流量值上。給煤機內部裝有溫度傳感器，進行溫度的檢測，并與設定值比較，當達到臨界點時，便輸出開關量信號和控制系統，快速關閉煤流出口高溫隔離閘門，從而達到阻止熱風反竄的目的。
When the coal ?through the control gate into the coal weiging feeder, the belt running speed signal and weight signal is transmitted to the micro processing controller, automatically calculate the instantaneous flow of coal. The transient flow through the continuous compare the setting flow and actual coal flow, to adjust the belt speed, so that the actual coal flow is maintained in the set value of flow. Coal feeder with internal temperature sensor to checking the temperature of the inside of the feeder, and compared with the set value, when it reaches the critical point, then switch quantity output signal and control system, quickly close the coal outlet temperature isolation gate, to prevent reverse flow of hot air.
三、技術指標Technical indicators
計量精度Measurement precision：±0.5%
壓力承受Under pressure：≤0.35MPa
輸送能力Transmission capacity：0.05～600t/h
輸送膠帶寬度Conveyor belt width：500～1400mm
輸送長度Delivery length：≥1600mm（進料口中心線至出料口中心線距離The inlet center line to the outlet of the center line distance）
調速方式Speed control mode：變頻調節Frequency regulation
控制器遠程接口Controller interface：電流輸出Current output：0～20mA或4～20mA（全隔離Full isolation）
控制器通訊接口Controller communication interface：RS232/RS485，標準modbus協議。Standard modbus agreement
工作溫度Working temperature：≤80°C?
四、性能特點performance characteristics
1、采用耐壓式全封閉殼體，密封嚴密，不漏氣漏塵，能夠在0.35MPa環境下工作，同時，在殼體
? ? ? 中部、頭部、尾部設有觀察窗，內部有防爆型照明燈，可方便觀察給煤機的運行情況；
The pressure of full closed shell, tight sealing, no leakage of gas and dust, can work in the 0.35MPa environment, at the same time, in the shell central, head, tail is provided with an observation window, internal explosion-proof lamp, can be easily observed running of coal feeder;
2、快速斷料裝置：電動或氣動式高溫隔離閘門，有效防止熱風反竄，安全性能高；
Fast cutting device: electric or pneumatic type high temperature isolation gate, effectively prevent the hot air anti channeling, high safety performance.
3、落煤清掃系統：可連續或定時清掃機體內的積塵和落煤；
Coal cleaning system: can be continuous or regular cleaning machine body dust and coal;
4、完善的報警系統：堵煤、斷煤、皮帶跑偏、超溫、超壓檢測報警裝置，可在超出設定范圍時快速
? ? ? 關閉閥門并泄壓；
To improve the alarm system: blocking coal, no coal, broken belt deviation, over temperature, over pressure detection and alarm device, can quickly beyond the set range valve close the gate and pressure relief;
5、全懸浮式直接稱重結構（專利號：0236977.3），計量精確，穩定性好；
Suspended direct weighing structure (Patent No.: 236977.3), accurate measurement, good stability；
6、獨特的皮帶自動張力調節和自動糾偏功能，保證了皮帶張力恒定，長期運行不跑偏。
Automatic belt tension unique regulation and automatic correction function, ensure the belt tension constant, long-term operation without deviation.
7、稱重信號采用高精度的數字稱重模塊，數字傳輸技術，具有線路簡單、無調節部件、分辨率高、信號無衰減、抗干擾強。 ?By using high precision digital weighing module, digital transmission technology, has the advantages of simple circuit, no adjustment parts, high resolution, no signal attenuation, no interference.
? ?8、控制器采用觸摸顯示技術，中英文圖形化顯示，向導操作方式，操作簡單，無需記憶。The controller uses touch display technology，Chinese- English graphical display, guide mode of operation, operation simple, without memory.
? ?9、可接485通訊，CAN通訊，DCS,PLC等接口。It can connect 485 communications; CAN communication, DCS, PLC etc. interface.
? ?10、采用GPRS無線數傳功能，可以短信報表、遠程診斷、校秤等功能。
Using the GPRS wireless data transmission function, can SMS report, remote diagnosis, remote control scales and other functions.
