The ship crane crane manufacturer

The ship crane crane manufacturers selling

The ship crane crane manufacturers selling

The ship crane crane manufacturers selling

The company is a professional production of 2.5 tons and 3.5 tons 4T5T6.3 tons 8 tons 10 tons 12 tons 14T16T20 tons of the ship lift straight fold. Today issued a 10 tons ship dock crane crane hanging 10T with straight arm folding boat, can also be installed on the shore or workshop and workshop indoor crane. Cheng Li company is the ship crane manufacturers, set product development, design, manufacture, installation in one, also called the wharf crane crane ship. Specializing in sales of electric crane AI manager said user attention in the purchase of the ship lift at issue here, first look at the user purchase ship crane lifting the weight of the goods, look at the ship crane lifting goods in the distance, accurate to the sales manager said to understand. So as to set a suitable ship crane.

10噸船吊有機械動機帶動有電動，但大部分都是用電動機作動力．公司生產出來的船吊一部分在國內用，而另一部分出口到國外，因我公司船吊即經濟又實用，受全國及外國用戶的歡迎．

The 10 ton ship crane mechanical drive power, but most of them are the motor as power. Part of the domestic company with hanging out of the boat, and the other part of exports to foreign countries, because our ship crane that is economical and practical, national and foreign users.

10噸船吊10T碼頭吊直折臂船用起重機可360度旋轉,有操作臺，通過由機芯開始,連接在立柱,吊臂上的鋼絲繩的收縮,來控制吊臂體的起仰,從而控制貨物的起升.工作范圍大，裝卸過程不需移船，提高了裝卸效率。

10 tons of cargo ship 10T terminal hanging straight jib crane can rotate 360 degrees, operation station, by the movement began, connected to the column, lifting wire rope on the arm to control the shrinkage, the arm of your goods, so as to control the lifting. The scope of work, loading and unloading process does not need ship, improve the efficiency of loading and unloading.

10噸船吊10T碼頭吊直折臂船用起重機地址：

10 tons of cargo ship 10T terminal hanging straight jib crane ship:

[公 司]: 程力專用汽車股份有限公司

[the company]: chengli special automobile Limited by Share Ltd

[網 址]: www.hbcsdzqc.com/

[url]: www.hbcsdzqc.com/

[郵 箱]: 1297429942@qq.com

[mail]: 1297429942@qq.com

[傳 真]：0722－3268188

Fax]:07223268188

[業務 QQ]：648987021

[QQ]:648987021

[聯系電話]：133 7781 5051

[Tel]:133 77815051

[銷售經理]：艾經理

[]: AI Manager Sales Manager

[郵政編碼]：441300

The postal code]:441300

[公司地址]：湖北省隨州市南郊平原崗程力汽車工業園

Company address: Hubei province Suizhou city] south suburb Gang Chengli Automobile Industry Park

[公 司]: 湖北龍晨特種汽車裝備有限公司

[the company]: Hubei Liuzhou morning special automobile equipment Co. Ltd.

載運重件貨物并能依靠自身設備裝卸的運輸船舶，又稱重貨船。隨著社會經濟的發展，重件貨如發電設備、化工和煉油設備、鉆探平臺、熱交換器、原子能反應堆、機車以及拖船、駁船等的水上運輸量日益增加。這些貨物過重過大,或受港口條件限制,普通貨船無法運輸。60年代末以來，各種專用重件運輸船應運而生。

Carrying heavy goods and can rely on their ships and cargo handling equipment, weighing. With the development of society and economy, heavy cargo such as power equipment, chemical industry and oil refining equipment, drilling platform, heat exchanger, nuclear reactors, and tugs, barges and other locomotive water transportation is increasing. These goods are too high, or the port conditions, general cargo ships to transport. Since 60 time end, all kinds of special heavy cargo ship emerge as the times require.

重件運輸船甲板空間寬敞，便于裝卸。船的寬度較大,長寬比一般在5左右。通常只設一個艙,艙口較大,寬度約為船寬的70%～80%,長度為船長的50%以上。這種船吃水較淺，便于出入中小港口，可直接將成套設備運往目的地。重件運輸船的航速一般為每小時11～14海里，主機功率一般為4000～6000馬力，大多采用兩臺中速柴油機驅動雙槳推進。為了保證吊裝時的船舶穩性，不致造成過大的橫傾，重件運輸船均有大容量的壓載、平衡水艙。有的重件運輸船還在船舷一側設兩個用液壓控制的撐腳，裝卸重件貨時，撐腳支撐在碼頭上，調整船的橫傾。

Heavy cargo ship deck space is spacious, convenient loading and unloading. The breadth of the ship is larger, the ratio of length to width is generally around 5. Usually only one class, large hatch beam, width is about 70% ~ 80%, 50% more than the length of the captain. The ship of shallow draft, access to the small port of complete sets of equipment, can be directly sent to the destination. Heavy cargo ship is generally 11 to 14 miles per hour, the engine power is generally 4000 to 6000 horsepower, most of the two sets of medium speed diesel engine driven twin-screw. In order to ensure the stability of the ship when lifting, without causing a heel big, heavy cargo ship with large capacity water tank, load balance. Some heavy cargo ship in the side with two hydraulic control leg, loading and unloading heavy cargo, leg support at the dock, ship rolling angle adjustment.

第一次購買隨車吊注意的5個要點

The first purchase of 5 points that truck with crane

注意的5個要點 搞清楚自己購買隨車吊的用途，如用來吊運型材，鋼材，機械等。再參考一下幾點：

The 5 key to figure out to buy their own use of truck crane, such as lifting bar, steel, machinery etc.. To refer to the following points:

1. 選擇合適長度的吊機，通常相同力矩的吊機，隨車吊廠家會有幾種不同的節數或長度的吊機供選擇，用戶可以按照最大的吊裝高度確定?？紤]多遠吊多重的東西。

1 select the appropriate length of the crane, crane is usually the same moment, lorry crane crane manufacturers will have several different node number or length of choice, the user can according to the maximum lifting height determination. Consider how far hanging weight.

2. 選擇吊機吊運能力（吊機力矩），按照最大的起吊重量和工作半徑相乘即得需要的吊機力矩。一般的要考慮貨物的重量

2 select the crane lifting capacity (crane moment), according to the maximum lifting weight and radius is needed by crane moment. General to consider the weight of the goods

3. 選擇合適的底盤，按照吊機不同，選擇不同承受能力的底盤，通常大梁越大越好。3噸以下的吊機可以選用230的大梁；3-6噸的吊機，可以選用250的大梁，6-8噸的吊機應使用280的大梁，8-10噸的吊機常用后八輪或者前四后八的底盤。

3 choose the right chassis, in accordance with the crane is different, choose different capacity of the chassis, usually the better beam. Crane 3 tons can be used 230 tons of crane girder; 3-6, can choose 250 tons crane beam, 6-8 beam of 280 should be used, 8-10 ton crane is used after the eight round or eight after the first four chassis.

4. 選擇合適廂長的底盤，按照吊運型材的長度不同，選擇合適軸距的底盤，可以節約投資也可以避免貨箱長度不夠造成的不必要的麻煩。兩軸車總長只有9米。貨箱一般是5.8米到6.14米。

4 choose the right car long chassis, in accordance with the lifting section of different length, select the appropriate wheelbase chassis, can save investment and can also avoid the body length sufficient to cause unnecessary trouble. Two axle vehicle length is 9 meters. Packing box is 5.8 meters to 6.14 meters.

5. 需要的最大起吊重量。最大的吊裝高度。和最大的作業半徑。

5 requires the maximum lifting weight. Maximum hoisting height. And the biggest operating radius.

二節，三節，四節，五節直臂式或折臂式吊機."液壓閥及密封件采用原裝進口/優質高強度國產和進品鋼板/全回轉360度及多變型吊臂和立柱“。性能優越，能力超強

The two section, three section, four section, five section of straight arm type or folding arm type crane. "Hydraulic valves and seals imported / high strength of domestic goods into the plate / full rotation of 360 degrees and multi variant arm and column". Superior performance, super capacity

隨車吊（truck with crane）購車流程：

Truck crane (truck with crane) purchase a car flow:

我們將謁誠為您提供更好、更快、更優質的服務！

We will sincerely provide you better, faster, better quality of service!

?第一步：購車洽談：

The first step: to negotiate the purchase a car?:

通過電話聯系或實地考察洽談車輛型號、價格和相關要求。

Contacted by phone or to negotiate fieldwork vehicle type, price and related requirements.

?第二步：簽訂合同：

The second step: the signing of the contract?:

雙方簽訂車輛購銷合同并預付合同定金（傳真簽訂合同、實地簽訂合同均可）。

The two sides signed a purchase and sale contract vehicles and prepaid deposit contract (fax contract, signed a contract can be field).

?第三步：安排生產：

The third step: arrange the production?:

我公司根據合同要求，安排車間生產。

Our company according to the requirements of the contract, arrange the production.

?第四步：交付車輛：

The fourth step: delivery vehicles?:

車輛交付驗收，支付車輛余款，完成相關手續。

Acceptance of delivery of the vehicle, vehicle balance of payment, the completion of the relevant procedures.

交付方式：客戶可自提車輛，也可協商由我公司安排送車并協定相關費用.更多詳細訂車流程請來電咨詢！

Delivery: customers from mentioning the car, can be reached by my company to arrange to send the car and agreements related costs. For more details please inquire the booking proces

Truck crane and basic concept of monomer pump engine

單體泵是用于產生噴油器(或噴射器)的噴射壓力的裝置。對于采用單體泵式電控燃油噴射系統的發動機來說，有幾個氣缸，就有幾個單體泵，單體泵是第二代電控燃油噴射系統，按照高壓產生裝置的不同，可將燃油噴射系統分為分配泵、直列泵、泵噴嘴和單體泵電控燃油噴射系統。

Single pump is used to produce fuel injector (or jet) injection pressure device. For the single pump type electronic control fuel injection system of engine, a cylinder, a few single pump, single pump is the second generation of electronic control fuel injection system, generating device according to the different pressure, the fuel injection system is divided into the pump, pump, pump line nozzle and single pump electronically controlled fuel injection system.

工作原理 單體泵的組成：單體泵由柱塞套筒、柱塞、彈簧座、回位彈簧、出油閥、出油閥彈簧、出油閥座、出油閥壓緊螺帽等零件組成。 １、出油閥的作用

Working principle of single pump: single pump by the plunger sleeve, piston, a spring seat, a return spring, out of the oil valve, oil valve, oil valve spring, a valve compression nut and other parts. 1, the role of valve

（１）防止噴油后滴油，提高關閉速度：停止供油時，出油閥減壓帶的下沿一進入導管時，高壓油管與泵室的通路便被切斷。當出油閥完全座落后下降了一距離ｈ，因而高壓油管的容積得到增大，使油壓迅速地下降１MPa～２MPa，斷油迅速干脆，防止了因油壓的波動和“管縮油漲”而產生噴后滴油。 Ｐ泵>Ｐ簧＋Ｐ殘—開； Ｐ泵簧＋Ｐ殘—關。

(1) to prevent the injection after the drop of oil, improve the closing speed: to stop the oil out of the oil valve, vacuum belt along a pathway into the tube, high pressure oil pipe and pump chamber is cut off. When the valve is located after falling a distance of H, so the volume of high pressure fuel pipe is increased, the pressure drops rapidly from 1MPa to 2MPa, just off the oil quickly, prevent the oil pressure fluctuation and "pipe shrinking oil rose" and after the drop of oil spray. P >P P + - pump spring residue; P + P and - off pump spring.

（２）防止噴油前滴油，提高噴射速度：噴油泵供油時，待油壓高于出油閥彈簧的預緊力和高壓油管內的殘余壓力后，出油閥升起，其密封錐面離開閥座。必須等到出油閥上的減壓帶完全離開閥座的導向孔時，泵油室的燃油才能進入高壓油管。

(2) to prevent the drop of oil injection, injection speed: when the fuel pump oil, when the oil pressure is higher than the residual pressure valve spring pre tightening force and in the high-pressure oil pipe, the valve rises, the sealing surface away from the seat. We must wait until the relief valve on the pilot hole is completely off the seat belt, pump oil chamber of the fuel to enter the high pressure oil pipe.

（３）防止燃油倒流，使高壓油管內保持一定的殘余壓力

(3) to prevent the backflow of fuel to maintain a certain pressure, residual pressure pipeline

２、出油閥的構造

2, the structure of the oil valve

（１）出油閥的圓錐部是閥的軸向密封錐面，閥的錐部在導孔中滑動配合起導向作用。尾部加工有切槽，形成十字形斷面，以便使燃油通過。出油閥中部的圓柱面叫減壓帶，它與密封錐面間形成了一個減壓容積。

(1) the cone valve is the valve axial sealing cone, cone valve slide in the guide hole in match play the guiding role. The tail is cut processing, the formation of ten shaped cross section, so that the fuel through. The central cylinder valve called the decompression zone, it forms a seal between the vacuum cone volume.

（２）出油閥和閥座是精密偶件，采用優質合金鋼制造，其導孔、上下端面及座孔經過精密的加工和研磨，配對以后不能互換。

(2) out of the oil valve and valve seat is of precision parts, the use of high-quality alloy steel, the pilot hole, on the lower end face and hole after processing and precision grinding, after the pair are not interchangeable.

（３）閥座的下端面和柱塞套筒的上端面是精密加工嚴密貼合，它是通過壓緊螺帽以規定的扭緊力矩來壓緊的。壓緊螺帽與閥座之間有一定厚度的銅制高壓密封墊圈。出油閥壓緊螺帽和殼體上端面間還有低壓密封墊圈。

(3) on the end face of the piston sleeve and valve seat surface is precision machining tight fit, it is pressed to nut tightening torque required to compress. Copper has a certain thickness between the high pressure compression nut and the valve seat sealing washer. Out of the oil valve compression nut and shell and sealing washer.

（４）在出油閥壓緊螺帽內腔裝有帶槽的減容器，以減小內腔空間的容積，促進噴停迅速，限制出油閥最大升程的作用。

(4) in a valve compression nut is composed of a container with a groove cut, to reduce the volume of cavity space, and promote rapid spray stop, limit the maximum valve lift.