961-085-000 961-086-000 MARSH BELLORFAM

產品價格：	1/人民幣
最后更新：	2012-09-25 21:34:36
產品產地：
發貨地：	上海 (發貨期：當天內發貨)
供應數量：	不限
有效期：	長期有效
最少起訂：	1
瀏覽次數：	531

公司基本資料信息

上海冠佑電氣自動化有限公司
陳尉先生銷售經理
會員[試用會員產品]
郵件2265736@163.com
手機13916770581
電話
傳真
地址上海市閔行區東川路2759弄

產品詳細說明

上海冠佑電氣自動化有限公司隨時歡迎您的來電咨詢，低價現貨供應 。

電話：021-60483978 13916770581

傳真：021-34689102 聯系人：陳尉

商務QQ：1305857511 郵箱：2265736@163.com

網址：www.gyautomation.com

MARSH BELLORFAM(馬士貝羅浮) 電氣轉換器一級代理

Type 1000

Type 1000 I/P & E/P Transducers

Low Cost
Built-in Volume Booster
Small Size
Field Reversible
Low Air consumption
Mounts at Any Angle
Convenient External Span & Zero Adjusts
(Except for Explosion Proof Models)
Light Weight
Wide Supply Pressure Range
Low Supply Pressure Sensitivity

Product Detail:

The Type 1000 Transducer is an electro-pneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM/339 slpm). Model selections include general purpose, NEMA 4X Type, extended range, high relief, intrinsically safe, and explosion proof.

Part Numbers:

T-1000 General Purpose ordering information:
Input	Output*		Part Number	Impedance (nominal)
Input	psig	BAR	Part Number	Impedance (nominal)
4-20mA	3-9	0.2-0.6	961-072-000	90Ω
	9-15	0.6-1.0	961-073-000	90Ω
	3-15	0.2-1.0	961-070-000	180Ω
	3-27	0.2-1.9	961-074-000	220Ω
	6-30	0.4-2.1	961-075-000	220Ω
	1-17	0.07-1.2	961-116-000	250Ω
	3-15	0.2-1.0	961-089-000	180Ω
10-50mA	3-15	0.2-1.0	961-076-000	70Ω
	3-27	0.2-1.9	961-077-000	85Ω
	6-30	0.4-2.1	961-078-000	85Ω ============
0-5V	3-15	0.2-1.0	961-079-000	615Ω
	3-27	0.2-1.9	961-080-000	530Ω
	6-30	0.4-2.1	961-081-000	530Ω
1-9V	3-15	0.2-1.0	961-085-000	985Ω
	3-27	0.2-1.9	961-086-000	840Ω
	6-30	0.4-2.1	961-087-000	840Ω
NOTE: For NEMA4X, add 004 suffix.
T-1000 extended range ordering information:
Input	Output*		Part Number	Impedance (nominal)
Input	psig	BAR	Part Number	Impedance (nominal)
0-60mA	2-120	0.1-8.3	961-107-000	220Ω
4-20mA	3-120	0.2-8.3	961-111-000	260Ω
4-20mA	2-60	0.1-4.1	961-117-000	225Ω
0-10V	3-120	0.2-8.3	961-112-000	805Ω
0-5V	2-60	0.1-4.1	961-118-000	500Ω
T-1000 HIGH RELIEF ordering information:
Input	Output*		Part Number	Impedance (nominal)
Input	psig	BAR	Part Number	Impedance (nominal)
4-20mA	3-9	0.2-0.6	961-130-000	90Ω
	9-15	0.6-1.0	961-131-000	90Ω
	3-15	0.2-1.0	961-132-000	180Ω
	3-27	0.2-1.9	961-133-000	220Ω
	6-30	0.4-2.1	961-134-000	220Ω
	3-15	0.2-1.0	961-135-000	180Ω
	1-17	0.07-1.2	961-136-000	250Ω
10-50mA	3-15	0.2-1.0	961-137-000	70Ω
	3-27	0.2-1.9	961-138-000	85Ω
	6-30	0.4-2.1	961-139-000	85Ω
* For output pressures less than 3 psi (0.2 BAR) or greater than 30 psi (21 BAR), the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay. Consult Applications Engineers for further information. ** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

Type 1000 Explosion Proof
Input	Output*		Part Number	Impedance (nominal)	Agency Approvals (see notes)
Input	psig	BAR	Part Number	Impedance (nominal)	Agency Approvals (see notes)
4-20mA	3-15	0.2-1.0	961-098-000	180Ω	Explosion-Proof, Factory Mutual¹
4-20mA	3-15	0.2-1.0	961-098-100	180Ω	CSA Explosion Proof
1-9v	3-15	20-100	961-142-000	985Ω	Explosion Proof Factory Mutual¹
Type 1000 Intrinsically Safe
4-20mA	3-15	0.2-1.0	961-099-000	180Ω	Intrinsically Safe, Factory Mutual^3,4
	3-27	0.2-1.9	961-100-000	220Ω	Intrinsically Safe, Factory Mutual^3,4
	3-15	0.2-1.0	961-105-000	180Ω	Intrinsically Safe, CSA5
	3-27	0.2-1.9	961-106-000	220Ω	Intrinsically Safe, CSA5
	6-30	0.4-2.1	961-101-000	220Ω	Intrinsically Safe, Factory Mutual^3,4
	15-3	1.0-0.2	961-175-000	180Ω	Intrinsically Safe, Factory Mutual^3,4
	27-3	1.9-0.2	961-176-000	220Ω	Intrinsically Safe, Factory Mutual^3,4
	30-6	2.1-0.4	961-177-000	220Ω	Intrinsically Safe, Factory Mutual^3,4
*For output pressures less than 3 psi or greater than 30 psi the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay. Consult application engineers for further information.
Agency Approval Notes: The Type 1000 Explosion-Proof Transducer has been submitted, tested and approved by Factory Mutual Research for use in hazardous locations for Class I, Division 1, Group D, Class II, Division 1, Groups E, F & G and Class III requirements. It also has been approved to meet NEMA 4 Outdoor requirements. Canadian Standards Association certified for hazardous locations: Class I, Group D, Class II, Groups E, F and G, Class III, CSA Enc. 4. Factory Mutual Research Approved as intrinsically Safe for Class I, II, III, Division 1, Groups A, B, C, D, E, G when installed in accordance with interconnection diagram No. 541-000-012 and with the proper energy limiting barriers. Factory Mutual Research Approved as nonincendive for Class I, Division 2, Groups A, B, C, D, and suitable for Class II and III, Division 2, Group G. Barriers are not required for nonincendive rating. Canadian Standards Association certified as intrinsically safe when connected through certified diode safety barriers in accordance with Bellofram Installation Instruction 541-000-012. Explosion proof, intrinsically safe, and non-incendive ratings are not affected by recalibrating for split range or reverse acting applications. The Bellofram T-1000 Transducers were tested and found to comply with Electromagnetic compatibility Directive effective January 1, 1996. The relevant EMC specifications tested were the following: EN 50081-1 (1992) and EN 50082-1 (1992). A Technical Construction File, Serial #107 was written and Certificate of Conformity issued by a Competent Body.

Options:

Option	Part Number/Last 3 digits
Explosion Proof Mounting Kit	971-079-000
Explosion Proof Panel Mounting Kit	971-078-000
DIN Rail Kit	010-115-000
Hirschman Connector Kit (3-prong)	971-126-000
Filter Kit, Coalescing, 0.1 micron	010-140-000
Filter Element Kit (for coalescing filter, package of 10)	010-141-000
Output Gauges–Option “8”	last 3 digits become - 008
Dielectric Strength Testing Option “12”	last 3 digits become - 012
NEMA 4X Type Enclosure Option: Option “4”	last 3 digits become - 004**
** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

在線詢盤/留言 請仔細填寫準確及時的聯系到你!

您的姓名：	您的姓名沒有寫*	預計需求數量：	* 請輸入整數 請?zhí)顚?xiě)數量
聯系手機：	*	移動電話或傳真：
電子郵件：	*郵箱格式不正確	所在單位：
咨詢內容：	我想了解：《961-085-000 961-086-000 MARSH BELLORFAM》的詳細信息.請商家盡快與我聯系。 *