LED導光板刻線機 NB-1410-LED

功能特點|Functions and special feature
中瑞技術合作產品，采用高轉速（60000轉/分鐘）銑刀電機。X或Y方向可同時刻5條線
A product of Sino-Swiss technologies,servomotors are imported from Switzerland.It runs at the rotary speed up to 60,000rpm.It enable engraves 5 lines both in X & Y axis simultaneously.
采用意大利AMT直線導軌作為傳動軌道，保證機器高速運轉平穩且精度高。
AMT straight-line guide rails from ltaly are used as drive rails to ensure the machines will run in a steady manner at utmost accuracy.
采用日本松下電機控制銑刀上下運動，可隨意控制銑刀的下刀深度，對于有特殊要求的溝槽深度切割，即可由電腦控制切割任意深度。
Using Servo-motor from Panasonic,to control up,down. With computerized controls the depth of engraving,it enable the control of width and depth of the lines precisely according to the need users.
機器有三個功能頭：高速銑刀頭、X方向和Y方向5合1刀頭。可切割和刻線15mm以下的導光板，5合1刀頭可根據材料的高低自動調節深淺度。
The machine has three function heads:high speed milling router, X and Yaxis 5 in 1 engraving head,to enable engraving and cut maximum 15mm acrylic board.Engraving head can be adjust automatically to control the size of groove,engraving lines.
整機數據線全部采用德國進口。
Date wire all imported from Germany.
機器臺面采用美國進口纖維板，透氣性好，耐用，不易變形。
Table mat are imported from USA,the fiber board are durable,with good,permeability,very stable in thickness and shape.
由最穩定的以太網口用網線傳輸數據，并可直接連接AI軟件以及Autocad,Coraldraw等所有軟件輸出
Date is transfer by Ethernet,the most stable method.File can be exported to machine directly from Adobe Illustrator,Coraldraw without conversion to maintain maximum accuracy.
設有安全裝置（人手進入紅外線范圍以內，機器自動停止）。
Ultra Red Light sensor are equipped for user friendly and safety(machine automatically stop when perator's hand into the working area).
速度快，最快每秒可達到1500mm。
Machine can ruu at the maximum speed of up to 1500mm per second.
直接在機器上控制所有微調功能，包括圖檔自動優化功能，無需另配多一臺電腦。
All fine tuning can be made with control penal on the machine.
可由紅外線激光燈定位切割任意新起點，快速而又準確。
Red Ultra-light positioning device for printed work can be cut accurately in easy and quickest way.