Ambient air-cooled refrigerant compressed air dryers, high temperature air-cooled compressed air refrigeration dryer, ambient water cooled refrigerant compressed air dryers, hot water cooled compressed air refrigeration dryer Ambient air-cooled refrigerant compressed air dryers, high temperature air-cooled compressed air refrigeration dryer, ambient water cooled refrigerant compressed air dryers, hot water cooled compressed air refrigeration dryer First, the compressed air refrigeration dryer works 2, product features 1) user-friendly design, scientific and reasonable structure design, the mobile phone looks stylish, and aesthetically pleasing, operating, maintenance, and easy to service, and easy to install (no). 2) Machine cooling system and air system by experts throughout with different performance of variability in accurate calculations, design parameters for more than 20 per cent of the overhang. 3) refrigerant compressor: the international high performance refrigerant compressor, low vibration, Low Noise, reliable and energy-efficient, and ensure that the whole is a long service life. Compressor protection to IP 54 level. 4) Special Heat Exchanger Design to reduce inlet temperatures, and to increase outlet air temperature, to avoid lines generated droplets, impact to the production environment. 5) multi-format (Single, set, the control, PLC, frequency, etc. ) of the control line. Suitable for different users. 6) Complete the SMART protection: The ad hoc refrigerant high and low pressure protection, phase sequence is the protection, the low-temperature protection, as well as automatic integration into cream, the automatic shut-down, auto alarm, motor thermal protection, and protection features. 7) Automatic drainage, the need to set up with high water removal efficiency. Float, electronic timer can be based on the machine performance settings. 8) this unit with the unique Tornado separator. The condensate from the air completely detached, and in a variety of flow conditions prevent liquid water with compressed air, maintaining a high-performance, achieve the best dry from the water. 9) the pressure parts are the national GB 150 - 1998 the steel pressure vessel and GB 151 - 1999 the tube and shell heat exchangers of manufacturing, testing and acceptance, and acceptance of the pressure vessel safety technical supervision of the Statute. Device Structure design is very reasonable, and easy to repair and maintenance; the surface thermal injection molding, nice appearance, does not rust; a basic installation, run smoothly without vibration, the repair rate is low and no consumables, running costs low, continuous running without someone inside. 3, conditions and specifications Intake Air Temperature: Ambient-type =45 °C, high temperature =80 °C cooling: Air-cooled (water-cooled) and the pressure dew point: 1.7 °C ~10 °C (0.7 MPa) refrigerant: R - 22 or according to customer requirements in R 134 a, R 404 a, 507 R, no fluorine environmentally friendly refrigerant. Inlet pressure: 0.2 ~1.0 MPa (6.4 MPa following Order), the pressure loss: ≤ 0.02 MPa cooling water inlet temperature: = 32 ?C (water-cooled), the cooling water inlet pressure: 0.15 ~0.4 MPa (water-cooled) 4, model specifications and performance parameters and ambient air-cooled compressed air refrigeration dryer The high temperature air-cooled compressed air refrigeration dryer and ambient water-cooled, compressed air refrigeration dryer and hot water-cooled, compressed air refrigeration dryer Note: 1), high-pressure, anti-explosion-type, stainless steel, no fluorine, variable frequency control, computer control, etc. Special requirements can be customized. 2) low-voltage, special gases (such as methane, hydrogen, nitrogen, carbon dioxide, etc. ), 300 M 3 min or more to order. 3) technical parameters if there are changes to the product, without notice.