西門子CPU222CN繼電器AC/DC/DC

西門子CPU222CN繼電器AC/DC/DC 6ES7212-1BB23-0XB0

 地址（ Add ）：上海市松江區弘翔路58號195

公司優勢產品系列=西門子S7-200CN | S7-300PLC |  觸摸屏 | 變頻器 | 伺服電機 | 數控系統 | 總線電纜| 開關電源
CPU221 DC/DC/DC,6輸入/4輸出
CPU221 繼電器輸出,6輸入/4輸出
CPU222 DC/DC/DC,8輸入/6輸出
CPU222 繼電器輸出,8輸入/6輸出
CPU224 DC/DC/DC,14輸入/10輸出
CPU224 繼電器輸出,14輸入/10輸出
CPU224XP DC/DC/DC,14DI/10DO,2AI/1AO
CPU224XP 繼電器輸出,14DI/10DO,2AI/1AO
CPU226 DC/DC/DC,24輸入/16輸出
CPU226 繼電器輸出,24輸入/16輸出

CPU 221 installed are:

Integrated 24 V encoders/load power supply:
To directly connect the sensor and encoder. With 180 mA, it also can be used as the load power supply.
Two type:
Take a variety of power and control voltage
The built-in digital input/output:
Six input and four output.
A communication interface:
optional
As PPI interface, used for program function and HMI function (TD 200, OP), S7-200 internal CPU/CPU communication (9.6/19.2/187.5 KBPS), or from the stand as the MPI, used for MPI and standing (S7-300 /-400, OP, TD, button board) exchange data.
The user programmable interface (FreePort), take interrupting capacity, and the equipment used for Siemens serial data exchange, for example in the ASCII agreement, baud rate of 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2 Kbit/s, but will PC/PPI cable to use as RS 232 / RS 485 adapter.
Interrupt input:
The rise of process signal along or down to very high speed along the response
High-speed counter:
Four high-speed counter (30 kHz), but through the parameter Settings make can and reset input, with two separate input, and used as increase/down to counter; Or can be connected with 90 ° 2 is incremental encoder.
The simulation device (optional) :
For integration of the input of simulation and the user program test.
Simulation potentiometer:
A simulation potentiometer, can be in daily work used as a set value counter, for example set time.
Pulse output:
2 a high-frequency pulse output (maximum 20 kHz);
Can be used for positioning task, drive and frequency conversion motor stepping motor.
Real time clock (can be used as optional modules connected) :
For example used to give a message plus time mark, record the machine running time or used for the process control based on time.
EEPROM son module (option) :
Used to maintain integrity of STEP 7-Micro/WIN the user program and other documents.
Used to support data record function and formula management.
Allows fast modify the program (even if no programming device) and other program file.
Through the battery to provide a long time backup:
But will storage time increased to 200 days. Without the battery module, user data (such as the memory a state, data block, timer and counter) through the internal super capacitor protection, about 5 days. Can permanently kept the user program (free maintenance). Insert the battery module son memory slots in the module.