| Specifications |
| 11、注意事項(Notes): |
| 11-1、使用時請勿超出本規格所規定之極限，否則我們不保證此產品 |
| We will not guarantee the products if the application of our products are exceeded the limitation which is specified on this specification. |
| 11-2、倘若要變更此份文件的任何規格，請務必事先提出需求 |
| In case of changes of the specification specified on this document.A written notice is requested in advance. |
| 11-3、請勿觸壓著葉片以及電源線纏繞著風扇或用力拉扯電源線，如此軸心與電源線將會被損毀 |
| Please do not touch the impeller with the pressure and never bring the fan with lead wire.The bearing and lead wire may be damaged. |
| 11-4、本產品不保證因粉塵、水滴、小蟲進入，而影響壽命與不良品產生 |
| No guarantee on the products against the safety problem or failure caused by powder dust, drop of water or insect. |
| 11-5、如有任何資料及文件與此份資料不同，將以此份資料為主要參考 |
| If there is any data or related documentation different from this data sheet.This data sheet is the principle reference. |
| 11-6、請勿在可燃性氣體與任何有害環境中使用 |
| Please do not use the fan in the environment of corrosive gas or liquid or any detrimental gas. |
| 11-7、當風扇于運轉中，請勿企圖將風扇鎖死特別長的時間，如此，會因連續停止不轉，產生高熱而燒毀風扇 |
| While the fan is in operation, please do not lock the fan intentionally for a long periods of time, since the continuous stoppage will result in overheat and thus burnt out the fan |
| 11-8、組裝風扇時，請特別注意，因共振或振動產生的噪音 |
| During the installation of the fan, please pay substantial attention to possible notice caused by resonance vibration and shock. |
| 11-9、當搬運或作業中，風扇如從60cm的高度落下，將會對葉片的平衡產生若干影響，特別是滾珠軸承避免掉落 |
| It is very important to notify that avoid to drop from 60cm height when in any movement or operation,it will impact the balance of blade. Especially ball bearing structure is avoided to drop down. |
| 11-10、鎖外殼之螺絲扭力不得超 4Kgf |
| The torque of the screw which locked the frame should not exceed 4 Kgf |
