豪沃橡塑超高分子量聚乙烯懸臂梁墊板

豪沃橡塑超高分子量聚乙烯懸臂梁墊板突出特征：

1、耐磨性高居各類純塑料，而且隨分子量的增大而提高;UHMWPE與鋼、銅配對時容易產生粘著磨損，對配偶件的磨損小。使用壽命高于鋼質，耐磨性是炭鋼及不銹鋼的3～7倍;

2、自潤滑性很好，滾動摩擦系數在塑料中較低，可以在無潤滑下以滑動或轉動的形式工作，其潤滑性比鋼和銅在有潤滑油的情況下還要好!

3、具有很強的吸收沖擊能和摩擦消音的性能，有摩擦噪聲小的優點;

4、沖擊強度列塑料，是現有塑料品種中較耐沖擊的一種，常溫沖擊強度可與聚碳酸酯PC媲美，而低溫沖擊強度甚至比聚碳酸酯PC還要好;其沖擊強度是ABS的8倍、PA66的10倍、POM的22倍、PBT的25倍!

5、耐疲勞性很好，耐疲勞強度大于50萬次;

6、分子量較大，但不飽和鍵很少，因此具有優良的耐化學腐蝕性，能耐各類腐蝕性介質，比如：酸、堿、鹽，也能耐各類有機溶劑;

7、耐環境應力開裂的性能很好，是普通乙烯的200倍，抗應力開裂時間高達4000小時;而且耐高溫蠕變性也非常好;UHMWPE的耐輻射性亦很好;

8、超耐熱性不高，熱變形溫度HD

9、電氣性能良好，較佳的電絕緣性和抗靜電性，體積電阻率>1015Ω.cm，介電強度為90kV/mm，介電常數2.3;

10、表面無吸附力，對任何材料都沒有粘結性，具有較低的吸水率(<0.01%);

11、具有良好的抗高能輻射性;

12、無毒、無味、無滲出物;

13、耐老化優異的抗老化性能，在自然日照條件下，超高分子量聚乙烯的老化壽命為50年;

14、具有優異的機械加工性能。

HOWO rubber and plastic ultra high molecular weight polyethylene cantilever beam base plate prominent features:
1. The wear resistance is higher than that of all kinds of pure plastics, and increases with the increase of molecular weight; When UHMWPE is paired with steel and copper, it is easy to produce adhesive wear, and the wear of mating parts is small. The service life is higher than that of steel, and the wear resistance is 3 ~ 7 times that of carbon steel and stainless steel;
2. The self-lubricating property is very good, and the rolling friction coefficient is low in plastic. It can work in the form of sliding or rotation without lubrication. Its lubricity is better than that of steel and copper with lubricating oil!
3. It has strong absorption of impact energy and friction silencing performance, and has the advantage of low friction noise;
4. Impact strength column plastic is one of the existing plastic varieties that is more impact resistant. The impact strength at room temperature is comparable to that of polycarbonate PC, and the impact strength at low temperature is even better than that of polycarbonate PC; Its impact strength is 8 times that of ABS, 10 times that of PA66, 22 times that of POM and 25 times that of PBT!
5. The fatigue resistance is very good, and the fatigue strength is more than 500000 times;
6. The molecular weight is large, but there are few unsaturated bonds, so it has excellent chemical corrosion resistance and can withstand all kinds of corrosive media, such as acid, alkali, salt, and all kinds of organic solvents;
7. The environmental stress cracking resistance is very good, 200 times that of ordinary ethylene, and the stress cracking resistance time is up to 4000 hours; And high temperature creep resistance is also very good; UHMWPE also has good radiation resistance;
8. Super heat resistance is not high, thermal deformation temperature HD
9. Good electrical performance, good electrical insulation and antistatic property, volume resistivity >1015 Ω Cm, the dielectric strength is 90kv/mm, and the dielectric constant is 2.3;
10. There is no adsorption on the surface, and it has no adhesion to any material, with low water absorption (<0.01%);
11. It has good resistance to high-energy radiation;
12. Non toxic, tasteless, and free of exudates;
13. Excellent aging resistance. Under natural sunlight, the aging life of UHMWPE is 50 years;
14. It has excellent machinability.