20G便攜式頻譜分析儀N9344C N9918A

N9344C 手持頻譜分析儀（HSA），20 GHz

• 獲得專為現場使用設計的性能：便攜耐用，無風扇設計；無論白天還是夜晚均可顯示清晰的畫面；電池使用時間為 4 小時
• 性能與臺式儀器媲美：– 144 dBm DANL、± 1.3 dB 幅度精度和 < 0.95 s 全掃寬掃描時間
• 任務管理器可將測試設置時間縮短 95%，并自動完成現場測試

包括的內容:

• AC / DC適配器
• 電池
• USB 電纜
• 快速入門教程和幫助套件光盤
• 耳機
  
  

N9342C 手持頻譜分析儀（HSA），7 GHz
N9343C 手持頻譜分析儀（HSA），13.6GHz
N9344C 手持頻譜分析儀（HSA），20 GHz
頻譜分析儀 (信號分析儀)
N9912A FieldFox 手持式射頻分析儀，4 GHz 和 6 GHz
FIELDFOX 手持式分析儀軟件
N9917AU FieldFox 手持式分析儀軟件
N9915AU FieldFox 手持式分析儀軟件
N9913AU FieldFox 手持式分析儀軟件N5234A PNA-L 微波網絡分析儀,43.5GHz
N9918A FieldFox 手持式微波分析儀，26.5 GHz
N9917A FieldFox 手持式微波分析儀，18 GHz
N9916A FieldFox 手持式微波分析儀，14 GHz
N9915A FieldFox 手持式微波分析儀，9 GHz
Agilent N9340B      9Khz-3Ghz
Agilent N9342C      9khz-7Ghz
Agilent N9343C      9khz-13.6Ghz
Agilent N9344C      9khz-20Ghz
Agilent N9912A      30khz-4Ghz/6Ghz 
Agilent N9913A      30Khz-4Ghz
Agilent N9914A      30khz-6.5Ghz
Agilent N9915A      30KHZ-9Ghz
Agilent N9916A      30khz-14Ghz
Agilent N9917A      30khz-18Ghz
Agilent N9918A      30Khz-26.5G
Agilent N9935A      5Khz-9Ghz
Agilent N9936A      5Khz-14Ghz
Agilent N9937A      5Khz-18Ghz
Agilent N9938A      5Khz-26.5Ghz
Agilent N9950A      5Khz-32Ghz
Agilent N9951A      5Khz-44Ghz
Agilent N9952A      5Khz-50Ghz
Agilent N9960A      5Khz-32Ghz
Agilent N9961A      5Khz-44Ghz
Agilent N9962A     5Khz-50Ghz 
Keysight N9344C Handheld Spectrum Analyzer (HSA) 20 GHz

Field testing just got easier If you are making measurements in the field, the Keysight Technologies, Inc. N9344C handheld spectrum analyzer (HSA) makes your job easier. It's got the features you need for operating in tough field environments, and its measurement performance gives you confidence the job's been done right. The N9344C HSA lets you automate routine tasks to save time and ensure consistent results. Field testing just got easier with the Keysight N9344C HSA. Definitions and requirements This data sheet contains specifications and supplemental information for Keysight N9344C handheld spectrum analyzer. The differences between specifications, typical performance, and nominal values are described as follows. Definitions "Specifications" describe the performance of parameters and applies to temperatures ranging from –10 to 50 °C, unless otherwise noted. 95th percentile values indicate the breadth of the population (> 2) of performance tolerances expected to be met in 95% of the cases with a 95% confidence, for any ambient temperature in the range of 20 to 30 °C. In addition to the statistical observations of a sample of instruments, these values include the effects of the uncertainties of external calibration references. These values are not warranted. These values are updated occasionally if a significant change in the statistically observed behavior of production instruments occurs. "Typical" describes additional product performance information. It is performance beyond specification that 80% of the units exhibit with a 95% confidence level over the temperature range of 20 to 30 °C. Typical performance does not include measurement uncertainty. "Nominal values" indicate expected performance, or describe product performance that is useful in the application of the product. Conditions required to meet specifications The following conditions must be met for the analyzer to meet its specifications. – The analyzer is within its calibration cycle. – Under auto couple control, except when Swp Time Rule is set to Accuracy. – Any analyzer that has been stored at a temperature range inside the allowed storage range but outside the allowed operating range must be stored at an ambient temperature within the allowed operating range for at least two hours before being turned on. – The analyzer has been turned on at least 30 minutes. Certification Keysight Technologies certifies that this product met its published specifications at the time of shipment from the factory. Keysight Technologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Technology (NIST), to the extent allowed by the Institute’s calibration facility, and to the calibration facilities of other International Standards Organization (ISO) members.