The inspection well mold is mainly steel mold, the main material of the panel is Q235 steel plate, and the support structure can be section steel or steel plate. The specification can be selected according to the mold form, which shall meet the following requirements:
1. The mold shall have sufficient bearing capacity, stiffness and stability to ensure that it can reliably bear the weight, lateral pressure and working load of poured concrete during component production.
2. The mold shall be easy to assemble and remove, and shall be convenient for reinforcement installation, concrete pouring and curing.
3. The adjacent formworks shall be firmly connected, with tight gap, flat and smooth without staggered platform; Reliable fixing measures shall be taken for embedded parts on prefabricated components.
