HAG-45B斯米克銀焊條廠家代理批發

產品價格：	42/人民幣
最后更新：	2021-09-28 18:02:02
產品產地：	國產進口
發貨地：	江蘇南京市 (發貨期：當天內發貨)
供應數量：	不限
有效期：	長期有效
最少起訂：	1
瀏覽次數：	642

公司基本資料信息

山東錦騰焊接材料有限公司
趙經理經理
會員[試用會員產品]
郵件xutaihantiao@163.com
手機13613196825
電話
傳真
地址山東省濟南市天橋區堤口路17號D17文化創意產業園開創云谷聯合辦公區二樓D區034

產品詳細說明

HAG-45B斯米克銀焊條廠家代理批發銷售上海斯米克銀焊條 HAG-20BCd銀焊條斯米克銀焊條價格批發廠家銀焊料主要包括：銀焊條、銀焊絲、銀焊環、銀焊片、銀焊膏、銀焊粉焊劑說明：我公司銀焊料流動性好，價格便宜，工藝性能優良；具有不高的溶點,良好的潤濕性和填滿間隙的能力,并且接頭強度高、塑性好,導電性和耐蝕性優良，可以用來釬焊除鋁、鎂及其他低熔點金屬以外的所有黑色和有色金屬。形狀有條狀、絲狀、環狀、粉狀、膏狀、非晶太等，廣泛的應用于機電、電子、家電、五金、汽配、化工、航空航天等工業制造領域。銀焊料產品特點：流動性好，價格便宜，工藝性能優良；2、具有不高的熔點、良好的濕潤性和填滿間隙的能力；3、接頭強度高、塑性好、導電性和耐腐蝕性優良；4、釬焊銅及銀有自釬性，可不用釬劑。適用于接觸焊、氣體火焰焊、高頻釬焊及某些爐中釬焊，釬焊接頭具有較好的強度及導電性。銀基釬料牌號及性能一、銀銅磷釬料(℃)二、銀銅鋅釬料(環保型)(℃)(AWS)三、含鎘銀釬料(℃)Zn:余量Zn:余量四、規格及包裝

公司介紹：我司，位于以經濟、科技、工業、金融、貿易、會展和航運為的中國大城市上海市，地理位置優越，交通便利，擁有進出貿易港口，工業基礎發達。公司從原始的小作坊，如今已發展成了集科、工、貿為一體的大型綜合性公司。主要生產供應耐磨焊材、鈷基焊材、鑄鐵焊材、不銹鋼焊材、鎳基焊材、銀基焊材、釬焊料等多種規格和型號的焊接材料。并代理國內知名品牌焊材和進口國際大品牌焊條，也可根據客戶的要求定制生產，產品暢銷全國各地并遠銷海外，多次獲得業內人士的一致好評。公司主營焊條，產品廣泛用于水泥廠、糖廠、磚瓦廠、發電廠、礦場、電子、機電、機械設備、模具、石油產業、粉塵泵閥、泥漿泵葉輪、挖泥船等多個行業。主要型號有：
1、銀基釬料：(即銀焊條、銀焊絲、銀焊帶、銀焊片、銀焊粉、銀焊膏)5%銀焊條HL205，10%銀焊條HL301，15%銀焊條HL204,25%銀焊條HL302，45%銀焊條HL303，50%銀焊條HL304，Ag60銀釬料等。
2、耐磨焊材：磨具焊條、閥門焊條、碳化鎢焊條、鈷基焊條、鈷基焊絲、耐磨焊絲、堆焊藥芯焊絲等。

二、銀銅鋅環保焊料（銀釬料）牌號及性能
HAG-18BSn，含銀18%，是銀、銅、鋅、錫合金，熔化范圍稍高，潤濕性和填充性良好，價格經濟?？珊附鱼~、銅合金、鋼等材料。熔點770-810攝氏度。
HAG-25B，含銀25%，等同于國標BAg25CuZn及L302，是銀、銅、鋅、合金，具有較好的潤濕性和填充性，但熔點稍高，可焊銅、鋼等材料。熔點700-800攝氏度。
HAG-25BSn，含銀25%，等同于美標AWS BAg-37，是銀、銅、鋅、錫合金，熔點低于HAg-25B,提高了潤濕性和填充性?？珊搞~、鋼等材料。熔點680-780攝氏度。
HAG-30B，含銀30%，等同于美標AWS BAg-20，國標BAg30CuZn ,是銀、銅、鋅合金，熔點稍高，接頭有較好韌性，可釬焊銅、銅合金、鋼等材料。熔點677-766攝氏度。
HAG-35B，含銀35%，等同于美標AWS BAg-35，是銀、銅、鋅合金，中等熔化溫度，接頭有較好韌性，可釬焊銅、銅合金、鋼等材料。熔點621-732攝氏度。
HAG-35Sn，含銀35%，等同于國標BAg34CuZnSn，是銀、銅、鋅、錫合金，中等熔化溫度，有較好的流動性，更適用于鐵素體和非鐵素體鋼的焊接。熔點620-730攝氏度。
HAG-40B，含銀40%，是銀、銅、鋅、合金，具有較好的流動性、滲透性和韌性，熔點677-732攝氏度。
HAG-40BNi，含銀40%，是銀、銅、鋅、鎳合金，等同于美標AWS BAg-4，具有較好的抗蝕性、適用于不銹鋼的焊接和鎳基合金及炭化鎢的焊接，熔點670-780攝氏度。

Category 類別	Trade- Mark 牌號	Equivalent to China Standard 相當國標	Characteristics & application 特性和用途	Equivalent to AWS 相當AWS
Hard-surfacing 硬面堆焊	D 667	EDZCr-B-15	HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part. HRc≥48，耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件
	D 802	EDCoCr-A-03	HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter. HRc38-47，耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃	ECoCr-A
	D 812	EDCoCr-B-03	HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve. HRc45-50，耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥	ECoCr-B
	D 822		HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler. HRc≥53，耐熱、耐磨，但抗沖擊性差。堆焊鍋爐旋轉葉輪
	D 832	EDCoCr-C-03	HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way. HRc≥50，耐熱、耐磨。堆焊高溫工件如熱軋導軌	ECoCr-C
	D 842	EDCoCr-D-03	HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die. HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。堆焊熱鍛模
Cast iron 鑄鐵	Z 308	EZNI	Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool. 純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛	ENi-Cl
	Z 408	EZNIFE	Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap. 鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋	ENiFe-Cl
	Z 508	EZNiCu-1	Copper nickel, good and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load. 鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊	ENiCu-B
Copper alloys 銅合金	Cu 107	ECU	Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row. 紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排	ECu
	Cu 207	ECuSi	Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用	ECuSi
	Cu 227	ECuSnB	Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用	ECuSn-C
	Cu 237	ECuAl	Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys. 鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或堆焊用	ECuAl-A2
Aluminum alloys 鋁合金	Al 109	TAl	Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum. 純鋁，耐蝕性好，但強度不高，純鋁焊接用	E1100
	Al 209	TAlSi	Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys. 鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金	E4043
	Al 309	TAMn	Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys. 鋁錳，強度高，耐蝕。鋁合金焊接用	E3003
Nickel alloys 鎳合金	Ni 102	ENi-1	Pure nickel. Welding and surfacing of nickel and nickel to steel. 純鎳，用于鎳、鎳與鋼的焊接與堆焊	ENi-1
Nickel alloys 鎳合金	Ni 207	ENiCu-7	Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel. 鎳銅，用于鎳銅、鎳銅與鋼的焊接與堆焊	ENiCu-7

Category 類別	Trade mark 牌號	Chemical composition 主要成份(%)	Characteristics & application 特性和用途	Equivalent to AWS 相當AWS
Hardfacing 硬面堆焊	S 101	C3 Cr28 Ni4 Si3.5 Fe Rem.	HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump. HRc48-54，耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒，泵套
	S 111	C1 Cr29 W5 Co Rem.	HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve. HRc38-47，高溫下耐磨、耐蝕。堆焊高溫高壓閥門	ECoCr-A
	S 112	C1.5 Cr29 W8 Co Rem.	HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass. HRc45-50，高溫下耐磨、耐蝕。堆焊閥門，熱軋孔型	ECoCr-B
	S 113	C2.5 Cr30 W17 Co Rem.	HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage. HRc≥55，高溫下耐磨、耐熱，但抗沖擊性差。堆焊螺旋送料機用
	S 114	C2.5 Cr30 W12 Co Rem.	HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit. HRc≥53，高溫下耐磨、耐熱，但抗沖擊較差。堆焊牙輪鉆頭	ECoCr-C
Copper alloys 銅合金	S 201	Sn1 Si0.3Mn0.3 Cu Rem.	Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 機械性能好，抗裂性好。紫銅氣焊及氬弧焊用	ERCu
	S 211	Si3 Mn1 Cu Rem.	Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 機械性能好，銅合金氬弧焊及鋼的MIG釬焊用	ERCuSi-Al
	S 212	Sn5 Cu Rem.	Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用	ERCuSn-A
	S 213	Sn8 Cu Rem.	Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用	ERCuSn-C
	S 214	Al7.5 Cu Rem.	Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用	ERCuAl-A1
	S 215	Al9 Cu Rem.	Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用	ERCuAl-A2
	S 221	Cu60 Sn1 Si0.3 Zn Rem.	Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
	S 221F	Cu60 Sn1 Si 0.3 Zn Rem.	S221 welding rod coated with flux. 外涂焊劑的S221焊絲
	S 222	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵	RBCuZn-C
	S 222F	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	S222 welding rod coated with flux. 外涂焊劑的S222焊絲	RBCuZn-C
	S 223	Cu59 Sn0.6 Zn Rem.	Melting point is about 900℃. Braze welding of copper, steel and cast iron. 熔點約900℃。銅、鋼、鑄鐵釬焊用	RBCuZn-A
	S 224	Cu62 Si0.5 Zn Rem.	Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
Copper alloys 銅合金	S 225	Cu48 Ni10 Zn Rem.	Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys. 熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用	RBCuZn-D
	S 225F	Cu48 Ni10 Zn Rem.	S225 welding rod coated with flux. 外涂焊劑的S225焊絲	RBCuZn-D
	S 226	Cu60 Sn0.3 Si0.2 Zn Rem.	Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron. 熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵
	S 227	Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem.	Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵	RBCuZn-B
	S 229	Cu55 Ni6 Mn4 Zn余	Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide. 熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用
Aluminum alloys 鋁合金	S 301	Al≥99.5	Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蝕。純鋁氣焊、氬弧焊用	ER1100
	S 311	Si5 Al Rem.	Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys. 抗裂性好，通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金	ER4043
	S 321	Mn1.3 Al Rem.	Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用
	S 331	Mg5 Mn0.4 Al Rem.	Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蝕，強度高。鋁合金氬弧焊用	ER5183

在線詢盤/留言 請仔細填寫準確及時的聯系到你!

您的姓名：	您的姓名沒有寫*	預計需求數量：	* 請輸入整數請填寫數量
聯系手機：	*請填寫你的手機號碼	移動電話或傳真：
電子郵件：	*郵箱格式不正確請填寫你的電子郵件	所在單位：
咨詢內容：	我想了解：《HAG-45B斯米克銀焊條廠家代理批發》的詳細信息.請商家盡快與我聯系。 * 請填相關內容

更多..本企業其它產品

武漢OK 68.81瑞典伊薩焊條價格

鄭州75F美國萬能焊條價格

重慶BOHLER 7010-P1伯樂焊條批發

欧美视频二区36p_欧美日韩一区二区在线_小水嫩精品福利视频导航_欧美午夜精品久久久久久人妖

HAG-45B斯米克銀焊條廠家代理批發