|
|
1500ex防爆振動監測報警Vibration monitoring alarm
防爆振動監測報警1500ex詳細參數
防爆振動監測報警1500ex 規格:
報警設定范圍 |
1.加速度1-99m/s 2 (Peak) |
(選擇1,2或3) |
2.速度1-99mm/s(Peak) |
|
3.位移0.01-0.99mm(PP) |
頻率范圍 |
10-2000Hz(±10%) |
準確性 |
Within 5% (at 25°C,80Hz,10m/s 2 measurement of sinusoidal wave ) |
線性 |
Within 1% of full scale |
電力供應 |
AC或DC100-220V(小于10VA) |
繼電器運作 |
報警延遲可到60秒,一個是自保持操作另一個為自動復位操作,固體繼電器接觸(通過關閉驅動電源重置) |
機體結構 |
Ex dII BT6壓力和防爆(證書no.c12041 ) |
振動抵抗 |
傳感器:10G對于振動,100G對于撞擊 |
溫度 |
操作0°C-50°C |
|
儲存 -20°C- +70°C |
1500ex explosion-proof vibration monitoring alarm Vibration monitoring alarm
Blast vibration monitoring alarm with parameter 1500ex
Can be used in explosive gas dangerous place.
Vibration mode for the acceleration, velocity and displacement, can choose to use the internal switch.
Structure of explosion-proof compressive.
The sensor combines amplifier.
Alarm level is set to step 1%, from 1 to 99%, the internal digital switch control.
Two different alarm procedures, one is self maintainingoperation of another for the automatic reset operation.
Alarm delay to 60 seconds, can be set up to prevent misoperation.
Can be used for vibration monitoring, motor, fan, pipeline,large cranes.
Blast vibration monitoring alarm 1500ex specifications:
Alarm setting range
1 acceleration of 1-99m/s 2 (Peak)
(1,2 or 3)
The 2 speed 1-99mm/s (Peak)
3 displacement 0.01-0.99mm (PP)
Frequency range
10-2000Hz (± 10%)
Accuracy
Within 5% (at 25 ° C, 80Hz, 10m/s 2 measurement ofsinusoidal wave)
Linear
Within 1% of full scale
Power supply
AC or DC100-220V (less than 10VA)
Relay operation
Alarm delay to 60 seconds, one is self maintainingoperation of another for the automatic reset operation,solid state relay contact (by turning off the drive power reset)
The rated electric shock load of AC/DC 125V, 0.5A
Body structure
Ex dII BT6 pressure and explosion proof (no.c12041 certificate)
Vibration resistance
Sensors: 10G 100G for vibration, impact
Amplifier: 2G for 30G for vibration, impact
Temperature
Operation of 0 ° C-50 ° C
Storage of -20 ° C- +70 ° C