|
|
HG-7100壓縮空氣泄漏點掃描槍Scanning gun
適用泄露點形式
|
軟硬管孔隙裂紋、電磁閥等密封圈破損、轉換接頭等螺紋松動、快插接頭磨損等
各類氣動元器件所涉及的所有泄漏點(含二次泄漏) |
泄露點定位精度
|
±1 cm
|
最小泄漏源氣體壓力
|
0.03 MPa
|
最小可測泄漏量
|
1.0 L/min(ANR)
|
電池
|
通用DC9V堿性電池一節
|
電池使用時間
|
可連續使用40小時
|
本體尺寸*
|
L230×H130×W45mm
|
重量*
|
250克(包括電池)
|
HG-7100 compressed air leak scanning gun Scanninggun
Product features
Accurate positioning: positioning accuracy can reach ± 1cm;
False: very low false alarm rate less than 1%, indicating that the LED equipment leak without feeling to confirm thebasic;
Sensitivity of ultra high: no interference of electromagnetic signal of ultrasonic outside the gas leakage in equipment, motor operation can be a normal scan;
Adjustable sensitivity: can be adjusted according to the leakage detection sensitivity, to improve the sweep efficiency;
Easy to use: Based on ergonomics design, a gun typestructure, weighing less than 300 grams, lightweight andeasy to grip;
Basic parameters
Application of soft and hard pipe leak form pore crack,electromagnetic valve seal damage, adapter, screw loosening, quick connector wear etc.
All types of pneumatic all leak components involved(including two leakage)
Leak point positioning accuracy of ± 1 cm
Minimum leakage source gas pressure of 0.03 MPa
Minimum detectable leakage rate of 1 L/min (ANR)
Battery universal DC9V alkaline battery section
Use time of the battery can be used continuously for 40 hours
Body size * L230 * H130 * W45mm
* 250 grams of weight (including battery)