MH-204S含油軸承含油率比重計MH-204S Hydrometer

MH-204S含油軸承含油率比重計MH-204S Hydrometer

適用于：粉末冶金業含油軸承、新材料研究實驗室

GB/T 6163規范：含浸處理程序
密度：將樣品浸入到溫度65±5℃的熱油中，直到沒有氣泡出現，冷卻到室溫后，取出樣品，將
其附著于表面的油輕輕擦去。
含油率：將樣品放入容器內，降低容器內部之壓力小于4Kpa并且保持20分鐘，將已加熱至溫
度90±5℃之油，并注入到容器內完全浸滿樣品。繼續保持在此減壓下之狀態達30分
鐘，然后回復到常壓。當油溫回復到常溫時取出樣品，將附著在樣品上的油輕輕擦去。

MH-204S功能及規格：
型號： MH–204S
秤重范圍： 0.0001g 〜 200g
重量精度： 0.0001g
密度分辨率： 0.0001 g/cm3
功能： 經計算機聯機可直接讀取
生胚密度、燒結密度、孔隙率、含油率
標準接口： RS-232
備注： 標準配件：計算軟件光盤 廠商自備：XP計算機一部

MH-204S oil bearing oil content meter MH-204SHydrometer

Suitable for: Research Laboratory of powder metallurgyindustry, new material bearing

The GB/T 6163 specification: impregnation process

Density: the samples were immersed in a temperature of 65 ± 5 ℃ hot oil, until no bubbles appear, cooling to room temperature, the sample, will

The attached to the surface of the oil gently wipe.

The rate of oil: the sample is put in a container, reducing the pressure inside the container is less than 4Kpa and keep 20 minutes, will have been heated to a temperature

Degree of 90 ± 5 ℃ oil, and injected into the completelysoaked in sample container. Continue to maintain thestate in the decompression of up to 30

Clock, and then return to normal. When the oil temperature back to normal when the samples were taken out, will be attached to the sample oil gently wipe.

MH-204S functions and specifications:

Model: MH - 204S

Weighing range: 0.0001g ~ 200g

Accuracy of weight: 0.0001g

Density resolution: 0.0001 g/cm3

Function: the computer can be read directly

The green density, sintered density, porosity, the oil rate

Standard interfaces: RS-232

Note: standard accessories: computing vendor softwareCD owned: a XP computer