Sanitary RTD Sensors with Integral Cables for use in CIP Clean-In-Place Applications
PRS-CB Series
新產品!
PRS-CB Series :Sanitary RTD Sensors with Integral Cables for use in CIP Clean-In-Place Applications
PRS-3-100-A-S-0300-D1-CB-120
1/4" Diameter Probe Design for Standard Duty, or
3/8" to 3/16" Stepped Probe Design For Heavy Duty Applications
Probe Lengths of 3", 4", 5" and 6" Available From Stock, Other Lengths Also Available
Process Connection is a 1½"-16 AMP Tri-Grip™ (Tri-Clamp® Compatible) Standard, Other Sizes and Styles Available. Flanges Conform to ASME BPE-2007 Standard to Assure Trouble Free Interchangeability.
Sensor Can be Used in Sanitary, Hygienic and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Processes
316L SS Wetted Surfaces with 32 µinch or Better Surface Finish
4-Conductor, 120" Long PFA Cable with Molded Nylon Strain Relief Standard
-50 to 200°C (-58 to 392°F) Temperature Range
4-Wire Pt100 Class A Platinum RTD Sensor (100.00±0.06Ω at 0°C) Standard
Compatible with 3-Wire and 2-Wire RTD Instruments and Transmitters
Sanitary Temperature Sensor Specifications Include:
316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.
Probe lengths of 3, 4, 5 or 6 inches available from stock, other lengths available as special orders.
Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.
These sensors can be used with 2-wire or 3-wire systems see information below.
Insulation resistance: 100 megohms minimum at 100 VDC.
Thermal response time of less than 2.5 seconds in water flowing at 3 ft/sec (63% response).
This Sanitary Temperature Sensor containes a PT100 Platinum RTD element and is designed for use in Food, Dairy, Beverage and BioPharmaceutical Clean-In-Place (CIP) type applications.

The sensor includes a 1½" 16AMP process connection that conforms to ASME BPE-2007 for easy installation using industry standard gaskets and clamps. Standard Duty sensors are available with ¼" diameter probes, and Heavy
 

Duty sensors are available with a stepped 3⁄8" to 3⁄16" diameter probe. This sensor is provided with a 120" long, 4-conductor, #26AWG stranded nickel plated copper, PFA insulated and jacketed cable with a strain relief for convenient connection to control or monitoring equipment.
Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point)
 

or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.
In addition to the standard 1½-16AMP process connection, these can be provided in the following sizes and styles:
Process Connection Model Number Code
3/4"-16AMP -B1-
1" and 1½"-16AMP -D1-
2"-16AMP -E1-
2½"-16AMP -F1-
3"-16AMP -G1-
4"-16AMP -H1-
If you need a process connection that is not listed above, please contact our sales department for availability.
These sanitary sensors are supplied standard as 4-wire assemblies with two red wires and two white wires. When used in 3-wire applications, cut off one white wire making sure that it will not contact any terminals or metal surfaces (note: twisting the
 

two white wires together will reduce the lead wire resistance on one side of the sensing element by half adversely affecting the accuracy of the reading). When used in 2-wire applications, cut off one white wire and one red wire (note: in 2-wire applications,
 

twisting the two same-colored wires together at the terminals will not adversely affect your sensor accuracy since both wires will be affected by the reduction in resistance).
 

產品型號/產品描述
Standard Duty ¼" Diameter Probe Design
PRS-3-100-A-S-0300-D1-CB-120   3" long standard duty probe
PRS-3-100-A-S-0400-D1-CB-120  4" long standard duty probe
PRS-3-100-A-S-0500-D1-CB-120  5" long standard duty probe
PRS-3-100-A-S-0600-D1-CB-120  6" long standard duty probe
Heavy Duty 3/8" to 3/16" Stepped Probe Design
PRS-3-100-A-H-0300-D1-CB-120  3" long heavy duty probe
PRS-3-100-A-H-0400-D1-CB-120  4" long heavy duty probe
PRS-3-100-A-H-0500-D1-CB-120  5" long heavy duty probe
PRS-3-100-A-H-0600-D1-CB-120  6" long heavy duty probe
 

PRS-3-100-A-H-0300-D1-CB-120
PRS-3-100-A-H-0300-D1-M12
PRS-3-100-A-H-0300-D1-NB9W
PRS-3-100-A-H-0300-E1-NB9W
PRS-3-100-A-H-0400-D1-CB-120
PRS-3-100-A-H-0400-D1-M12
PRS-3-100-A-H-0400-D1-NB9W
PRS-3-100-A-H-0400-E1-NB9W
PRS-3-100-A-H-0500-D1-CB-120
PRS-3-100-A-H-0500-D1-M12
 

PRS-3-100-A-S-0300-E1-M12
PRS-3-100-A-S-0300-E1-NB9W
PRS-3-100-A-S-0300-F1-NB9W
PRS-3-100-A-S-0400-D1-CB-120
PRS-3-100-A-S-0400-D1-M12
PRS-3-100-A-S-0400-D1-NB9W
PRS-3-100-A-S-0400-E1-M12
PRS-3-100-A-S-0400-E1-NB9W
PRS-3-100-A-S-0500-B1-M12
PRS-3-100-A-S-0500-D1-CB-120
 

 PRS-3-100-A-S-0500-D1-M12
PRS-3-100-A-S-0500-D1-NB9W
PRS-3-100-A-S-0500-E1-M12
PRS-3-100-A-S-0500-E1-NB9W
PRS-3-100-A-S-0600-D1-CB-120
PRS-3-100-A-S-0600-D1-M12
PRS-3-100-A-S-0600-D1-NB9W
PRS-3-100-A-S-0600-E1-CB-120
PRS-3-100-A-S-0600-E1-M12
PRS-3-100-A-S-0600-E1-NB9W
 

PRS-3-100-A-S-1800-B1-CB-180
PRS-3-100-A-TW-0163-D1-M12
PRS-3-100-A-TW-0163-D1-NB9W
PRS-3-100-A-TW-0250-D1-M12
PRS-3-100-A-TW-0250-D1-NB9W
PRS-3-100-A-TW-0450-D1-M12
PRS-3-100-A-TW-0450-D1-NB9W
PRS-3-100-A-TW-0450-E1-M12
PRS-3-100-A-TW-0750-D1-M12
PRS-3-100-A-TW-0750-D1-NB9W
PRS-3-100-A-TW-0750-E1-NB9W
PRS-3-100-A-TW-1050-D1-M12
PRS-3-100-A-TW-1050-D1-NB9W
 

PRS-3-100-A-H-0500-D1-NB9W
PRS-3-100-A-H-0600-D1-CB-120
PRS-3-100-A-H-0600-D1-M12
PRS-3-100-A-H-0600-D1-NB9W
PRS-3-100-A-H-0600-E1-NB9W
PRS-3-100-A-H-2400-D1-CB-180
PRS-3-100-A-S-0300-B1-NB9W
PRS-3-100-A-S-0300-D1-CB-120
PRS-3-100-A-S-0300-D1-M12
PRS-3-100-A-S-0300-D1-NB9W

注釋:
For standard duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $1 per inch to the price (up to 24 inches).
For heavy duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $2.50 per inch to the price (up to 24 inches).
For other than the standard 1½-16AMP process connection, change "-D1-" in the model number to the code for the alternate process connection option listed above the "To Order" table and add $20 to the price
For cable lengths longer than 10' (120"), change the "-120" in model number to the desired length in inches and add $1 per foot to the price.
For probe lengths longer than 24 inches please contact Customer Service.
訂購示例: (1) PRS-3-100-A-S-0400-D1-CB-120 Sanitary RTD sensor with 4-wire Pt100, Class A accuracy element, ¼" diameter probe 4" long with 1½", 16AMP mounting cap and integral 120 inch long, 4-conductor cable with strain relief ,

產品型號說明
(1) (2) (3) (4) (5) (6)
PRS-3-
-
-
-
-
-CB-
選項描述
(1) Nominal Element Resistance
選擇
100 代表 100 ohm @ 0 C (standard)
1000 代表 1 kohm @ 0 C
(2) Accuracy
選擇
A 代表 Class A Accuracy
(3) Probe Diameter
選擇
S 代表 Standard Duty 1/4 inch
H 代表 Heavy Duty 3/8 to 3/16 inch stepped probe
(4) Probe Length
選擇
0300 代表 3 inch length
0400 代表 4 inch length
0500 代表 5 inch length
0600 代表 6 inch length
(5) Sanitary Flange (Cap) Size
選擇
D1 代表 1-1/2 inch Tri-Grip Flange (standard)
B1 代表 3/4 inch 16AMP Tri-Grip Flange
E1 代表 2 inch 16AMP Tri-Grip Flange
F1 代表 2-1/2 inch 16AMP Tri-Grip Flange
G1 代表 3 inch 16AMP Tri-Grip Flange
H1 代表 4 inch 16AMP Tri-Grip Flange
(6) Lead Wire Cable Length
選擇
120 代表 120 inch/10 ft (standard)
144 代表 144 inch/12 ft
180 代表 180 inch/15 ft
240 代表 240 inch/20 ft

 PRS-3-100-A-S-0600-D1-CB-120熱電阻 美國omega熱電阻