DAKOTA超聲波測厚儀35-DL

DAKOTA超聲波測厚儀35-DL

35DL美國達高特DAKOTA超聲波測厚儀

DAKOTA ultrasonic thickness gauge 35-DL

35DL American Dagaote DAKOTA ultrasonic thickness gauge

Mode 1: the use of direct contact probe measurementsbetween the excitation pulse and the first backwall echointerval.

Mode 2: delay between the type or water immersionprobe was used to measure the excitation pulse after the first interface echo and the first backwall echo interval.

Mode 3: delayed or water immersion probe was used to measure the excitation pulse tight with the two firstinterface echo continuous bottom echo interval.

Measurement type: thickness, velocity or transit time

Thickness measurement range of 0.003-25 inch (0.008-635mm)

Thickness range depends on the instrument type,material, probe, surface condition and the choice of parameter settings.

Material velocity range:

0.02000-0.7362inch/us

(0.5080-18.699mm/us)

Resolution (keyboard optional)

Low: 0.01 "(0.1mm)

Standard: 0.001 "(0.01mm)

High: 0.0001 "(0.001mm)

Transit time measurement range: 0.0-109.5us transit timeresolution: fixed at 000.01us

The measurement update rate:

4, 8, 16 or 16-20HZ (depending on the application andmeasurement mode)

The probe frequency range:

2.25-30MHZ

Minimum / maximum mode: press set to display the current thickness, minimum or maximum thickness value

Display hold / blank: display a blank or keep reading indisplay the previous readings

Alarm mode: with audible and visual indicatorprogrammable high and one low alarm set point

The difference mode: show the actual measured values and the reference values of the thickness differencebetween

The thinning rate mode: show the actual measured values and the reference values of the thickness difference between and percent difference

Application of automatic calling function: the different default and automatically adjust the internal parameter setting custom probe

Other standard features: calibration lock mode, the internal diagnostic test mode, metric / imperial units,airborne statistics

35DL USA Dagaote ultrasonic thickness tester DAKOTA35DL power supply

Battery: 3AA alkaline batteries or NIMH batteries

Operating time: 150 hour calibration time; with the background lamp continuous operating time of 30 hours

Low battery indicator: indicates the battery state of continuous

Battery protection device: automatic closing / continuousopen AC AC power supply: Options

35DL USA Dagaote DAKOTA ultrasonic thickness gauge35DL general performance

Environmental adaptability

Splash proof, shock resistant shell. Sealing, touch the color coding keyboard and voice feedback

Operating temperature range:

-10 ℃ ~+50 ℃ (14 ℉ ~122 ℉)

Size: 3.31 "wide x 6" long x 1.5 "(84 x 152 x 37.5mm)

Weight: 8.5oz (0.24kg)

Language functions: allows user-defined translation display content in multiple languages in Guangxi

35DL America Dagaote DAKOTA ultrasonic thickness gauge 35DL standard configuration:

Anyway, 3AA cell, block, probe cable, coupling agent,transport box, operation manual, two-year limitedwarranty.

35DL USA Dagaote DAKOTA ultrasonic thickness gauge35DL optional accessories

35/WF real time waveform

Gageview interface program

35DL/RS232 RS232 output

35PCScope PCScope program

USB/ADP-115 AC-115 power supply

USB/ADP-230 AC-230 power supply

MG2/RPC protective rubber sleeve

35/DLRETRO 35 upgrade to 35DL