|
|
MVX達高特DAKOTA超聲波測厚儀MVX
MVX測厚儀的尺寸重量和顯示分辨率有明顯優點
可調方波脈沖可滿足高分辨率和穿透深度等方面的要求
MVX具有多種視場選擇,包括射頻顯示、檢波、時基B-掃描和大尺寸數顯
A-掃描檢波模式是在脈沖回波模式中檢測缺陷/孔洞和在回波-回波模式中穿透涂層進行測量的模式
MVX的時基B-掃描顯示被測材料的斷面,常用于顯示被測材料底面的輪廓
多模式操作時內置AGC硬件的增益控制用于穿透涂層的測量
多種標定選件是MVX多方面適應性的例子
MVX可存儲64個用戶定義的設置,所有設置都可以選擇、編輯、存儲到任何位置
MVX有字母數據存儲器,以滿足用戶報告的要求
內置探頭類型可提高探頭的線性
高速掃描功能每秒可測量32次。將探頭從被測材料移開時,將顯示掃描測量的最小值
MVX具有上下限視聽報警功能
利用搜索功能定位檢測點,自動調整顯示傳送信號進入視場
可用Windows PC軟件將數據傳送的計算機或從計算機傳送到MVX
測量
脈沖-回波模式測量范圍:0.63~254mm(鋼)
回波-回波模式測量范圍:2.54~102mm(鋼,穿過涂層測量),隨涂層厚度的不同,測量范圍也會變化)
分辨率:0.01mm
聲速范圍:1250~9999m/s
單位:公制或英制
顯示
顯示屏:VGA灰色顯示,240x160象素??梢晠^(qū)62x45.7mm,EL背光
A-掃描:檢波+/-(缺陷視場),RF(全波視場)
B-掃描:穿過斷面視場,顯示速度為每一屏15秒
大數字顯示:標準厚度顯示,10mm高
厚度條形掃描:每秒6個讀數,在B-掃描和大數字顯示中可見
超聲波參數
測量模式:脈沖-回波模式,回波-回波模式(穿過涂層)
脈沖:可調方波脈沖
接收:根據選擇模式在40dB范圍內采用手動或AGC增益控制
數據處理
內置存儲器:可存儲12000個存儲頁(字母數字存儲), 每頁1個讀數和一個波形
輸出:雙向RS232接口,Windows PC界面軟件
功能
設置:64個用戶定義設置,用戶也可編輯出廠設置
閘門:脈沖-回波模式單閘門、回波-回波模式單閘門,閘門可調
報警模式:上下限視聽報警
快速掃描模式:每秒32個讀數,當探頭離開時顯示最小值
其他
電源:3節5號電池,可用150小時,電池電量顯示
自動關機:無操作5分鐘后自動關機
鍵盤:12個觸摸鍵
外殼:擠壓鋁機殼,底蓋用鍍鎳鋁板加密封墊封裝
工作溫度:-10~60℃
尺寸:63.5x165x31.5mm
重量:含電池385g
超聲波測厚儀MVX常用探頭選擇
型號 頻率 探頭晶片直徑 測量范圍 說明
PT-102-2700 5.0MHz φ6.3mm 1.0~152mm 標準高阻抗探頭
PT-101-2000 5.0MHz φ4.7mm 1.5~50mm 小管徑探頭
PT-101-2700 5.0MHz φ4.7mm 1.5~50mm 小管徑高阻抗探頭
PT-104-0000 1.0MHz φ12.7mm 3.8~50.8mm(鑄鐵中) 鑄鐵探頭
PT-102-1000 2.25MHz φ6.3mm 1.5~127mm 低頻探頭
PT-102-3200 7.5MHz φ6.3mm 0.63~152mm 超薄探頭
PT-102-3700 7.5MHz φ6.3mm 0.63~152mm 超薄高阻抗探頭
PT-104-2000 5.0MHz φ12.7mm 1.27~500mm 超厚探頭
PT-104-2700 5.0MHz φ12.7mm 1.27~500mm 超厚高阻抗探頭
PT-042-2000 5.0MHz φ6.3mm 1.0~152mm 標準高溫探頭,最高340℃
PT-042-2700 5.0MHz φ6.3mm 1.0~152mm 標準高溫高阻抗探頭,最高340℃
PT-044-2000 5.0MHz φ12.7mm 1.27~500mm 厚高溫探頭,最高340℃
PT-044-2700 5.0MHz φ12.7mm 1.27~500mm 超厚高溫高阻抗探頭,最高340℃
PT-212-2001 5.0MHz φ6.3mm 1.0~152mm 超高溫探頭,最高480℃
MVX Dagaote DAKOTA ultrasonic thickness gauge MVX
MVX thickness gauge size and display resolution has obvious advantages
Adjustable square wave pulse can meet the requirements of high resolution and penetration depth and other requirements
MVX has multiple field of view selection, including radio frequency display, detection, a B- scan and large sizedigital display
A- scanning detection mode is the detection of defects /holes and the echo echo mode through coatingmeasurement model in pulse echo mode
MVX base B- scan showed that the material being measured section, used to display the measured profilematerial bottom surface
Multi mode operation with AGC hardware gain control for measuring penetration coating
A variety of calibration option is MVX versatility example
MVX can store 64 user-defined settings, all settings can be selected, editing, storage to any location
MVX alphanumeric data memory, in order to meet the users reporting requirements
The built-in types can improve linear probe probe
High speed scanning function can be measured 32 timesper second. The probe from the measured material is removed, will display the minimum scanning measurement
MVX has a lower bound on the audiovisual alarm function
Use the search function detection point, automatically adjusts the display signals into the field of view
Use Windows PC software to transfer data from thecomputer or computer to MVX
Measurement
Pulse echo mode measurement range: 0.63 ~ 254MM(steel)
Echo echo mode measurement range: 2.54 ~ 102mm(steel, through the measurement of coating), as the thickness of the coating is different, the measurement range will change)
Resolution: 0.01mm
Speed range: 1250 ~ 9999m/s
Units: metric or imperial
Display
Display: VGA gray display, 240x160 pixels. Visual area 62x45.7mm, EL backlight
A- scan: detection of + / - (defect field), RF (full wavefield)
B- scan: cross section view, display speed for each screen for 15 seconds
Digital display: the standard thickness display, 10mm
The thickness of strip scanning: 6 per second reading, in the B- scan and digital display visible
Ultrasonic parameters
Measurement mode: pulse echo mode, echo echo mode(through the coating)
Pulse: adjustable square wave pulse
Receiving: depending on the selection mode in the range of 40dB using manual or AGC gain control
Data processing
Internal memory: can store 12000 memory page(alphanumeric memory), page 1 readings and a waveform
Output: the bidirectional RS232 interface, Windowsinterface of PC software
Function
Setting: 64 user-defined settings, users can also edit the factory settings
Gate: pulse echo mode single gate, echo echo mode single gate, gate adjustable
Alarm mode: upper and lower visual alarm
Fast scan mode: 32 per second reading, when the probeleft show minimum
Other
Power supply: 3 battery 5, available 150 hours, the battery power display
Automatic shutdown: automatic shutdown no operation in 5 minutes
Keyboard: 12 touch keys
Shell: extruded aluminum shell, a bottom cover sealingpad package with nickel plated aluminum
Working temperature: -10 ℃ ~ 60 ℃
Size: 63.5x165x31.5mm
Weight: 385g containing cell
Ultrasonic thickness gauge MVX common probe selection
The measuring range type frequency probe waferdiameter descrtption
PT-102-2700 5.0MHz φ 6.3mm 1 ~ 152mm standard high impedance prob
PT-101-2000 5.0MHz φ 4.7MM 1.5 ~ 50mm small diameter prob
PT-101-2700 5.0MHz φ 4.7MM 1.5 ~ 50mm small diameter high impedance prob
PT-104-0000 1.0MHz φ 12.7mm 3.8 ~ 50.8mm (cast iron) prob
PT-102-1000 2.25MHz φ 6.3mm 1.5 ~ 127mm frequency prob
PT-102-3200 7.5MHz φ 6.3mm 0.63 ~ 152mm ultrathin prob
PT-102-3700 7.5MHz φ 6.3mm 0.63 ~ 152mm ultra high impedance prob
PT-104-2000 5.0MHz φ 12.7mm 1.27 ~ 500mm thick prob
PT-104-2700 5.0MHz φ 12.7mm 1.27 ~ 500mm thick high impedance prob
PT-042-2000 5.0MHz φ 6.3mm 1 ~ 152mm standard temperature probe, the highest 340
PT-042-2700 5.0MHz φ 6.3mm 1 ~ 152mm standard high impedance probe, the highest 340
PT-044-2000 5.0MHz φ 12.7mm thickness 1.27 ~ 500mm temperature probe, the highest 340
PT-044-2700 5.0MHz φ 12.7mm 1.27 ~ 500mm thick high impedance probe, the highest 340
PT-212-2001 5.0MHz φ 6.3mm 1 ~ 152mm super high temperature probe, the highest 480