page 76 for more details.
Benefits of Intelligent
Spindle Field Cables
■ Lower cost of ownership
■ Higher durability
■ Lower start-up cost
■ Reduced cable
management systems
26
How To Build A DC Fastening System
mPro400GC-M, mPro400GC-P & mPro400GC-S
Building a DC System for Safety Critical applications
is as simple as 1, 2, 3!
1. Choose a common system to the right.
2. Select the correct components below.
3. Order your System!
Controller (Page 114)
Corded Tool (Page 32-44)
Cable (Page 121-122)
LiveWire Tool (Pages 28-31)
Access Point (Page 123) IRDA Device (Infrared Cable) (Page 123)
System Bus Cable (Page 124)
System Bus Terminator Plug (Page 124) System Bus Accessories (Page 124)
Isolation Transformer (Page 121) (Refer to Pages 46-47 to build a mPro400GC-E/GC-I system.)
27
mPro400GC-M (Master) 1 1
mPro400GC-P (Primary) 1 1 1 1 1 1
mPro400GC-S (Secondary) 1 2
18/48E_EXXX 1 1 2 1 3
67E_XXX 1
Tool Cable - 301866-XM (Air-Lb) 1 1 2 1 3
Tool Cable - 542778-XM (Matrix) 1
Extension Cable - 301877-XM (If Required) (Air-Lb)
Extension Cable - 542779-XM (If Required) (Matrix)
17/47B___BXX
(Battery or V-Max power source required. See Page 123.)
1 1 3
544249PT 1 1 1
935170 IRDA Only
935144 Pistol Holder w/IRDA
935290 Right Angle Holder w/IRDA
935999 70Nm, 90Nm, Crowfoot/Tubenut Holder w/IRDA
1 1 1
544196-005 (0.5M)
544196-020 (2M)
544196-050 (5M)
544196-200 (20M)
544196-500 (50M)
1 2 1 2 3
544197PT 1 1 1 1 1
S133420 Stack Light 3
S133410 4-Position Socket Tray 1
S133411 8-Position Socket Tray 1
S133406 Control Box 1
544185PT 1
One Corded Tool (18/48E_E)
One Corded Tool (67E_XXX) with a Control Box
One Corded Tool (18/48E_E) w/LiveWire?
Two Corded Tools (18/48E_E) with 8-Pos Socket Tray
One Corded 18/48E_E Tool w/4-Position Socket Tray
Three Corded Tools (18/48E_E)
One LiveWire? Tool only
Three LiveWire? Tools Only w/3 Stack Lights
Model/Part Number
Add or delete components
as required.
28
Electric Nutrunners – Cordless Transducer Control
Right Angle Tools
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Peripherals
S – Barcode Scanner
- – None
Motor
47
Tool Style
A – Angle
Power
B-Battery
47 B A X X B XX XXX X
Max Torque (Nm)
Under 60Nm, rounded up to
the nearest 1Nm. Over 60Nm,
rounded to the nearest 5Nm.
Battery
B – 26–48V
Output Drive
AM3 – 3/8” Sq.Dr.
AH4 – 1/2” Sq.Dr.
Retainer
– Pin Retainer
B Ball Retainer
Cordless Tools Nomenclature
Right Angle Series
Torque Range Bolt Size
5.5 - 90 Nm M5 - M12
4.1 - 77.4 Ft. Lbs. #10 - 9/16”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
47BAYSB28AM3
Right Angle Torque Range Free Speed (RPM) Weight
Less Battery Output
Drive Size
Length With 26V Battery
Model Number Ft.Lbs. Nm 26V* 44V* Vmax lbs. kg in. mm
47BAYSB15AM3 4.1-11.1 5.5-15 538 983 983 4.77 2.17 3/8" SQ 21.79 553.5
47BAYSB21AM3 5.9-15.5 8-21 411 751 751 4.77 2.17 3/8" SQ 21.79 553.5
47BAYSB28AM3 7.4-20.7 10-28 291 532 532 4.77 2.17 3/8" SQ 22.32 567.5
47BAYSB35AM3 9.6-25.8 12-35 244 447 447 5.35 2.43 3/8" SQ 23.06 600.0
47BAYSB50AM3 13.3-36.9 18-50 168 293 293 5.39 2.45 3/8" SQ 23.94 608.0
47BAYSB70AH4 17.7-66.3 24-70 123 216 216 8.54 3.88 1/2" SQ 26.7 678.0
47BAYSB90AH4** 29.5-77.4 40-90 82 144 144 8.73 3.96 1/2" SQ 26.7 678.0
*Speed with fully charged battery.
**Non-released model available for specific applications only.
Contact Regional Application Center for implementation assistance.
General: All tools must be used with a Cleco approved line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
(Apex u-Guard socket shown above not included)
29
Electric Nutrunners – Cordless Transducer Control
Pistol Grip Tools
17BPYSB13Q
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Peripherals
S – Barcode Scanner
- – None
Motor
17
Tool Style
P – Pistol
Power
B-Battery
17 B P X X B XX Q
Max Torque (Nm)
Under 60Nm, rounded up to
the nearest 1Nm.
Battery
B – 26–48V
Output Drive
Q – Quick change
Cordless Tools Nomenclature
Pistol Grip Series
Torque Range Bolt Size
3.0 - 13 Nm M5 - M6
2.2 - 9.6 Ft. Lbs. #10 - 1/4”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
Pistol Torque Range Free Speed (RPM) Weight
Less Battery Output
Drive Size
Length With 26V Battery
Model Number Ft.Lbs. Nm 26V* 44V* Vmax lbs. kg in. mm
17BPYSB05Q 2.2-3.7 3-5 1639 2428 2428 3.34 1.52 1/4" Hex 8.44 214.5
17BPYSB07Q 2.2-5.2 3-7 1161 1721 1721 3.34 1.52 1/4" Hex 8.44 214.5
17BPYSB09Q 2.2-6.6 3-9 887 1314 1314 3.34 1.52 1/4" Hex 8.44 214.5
17BPYSB13Q 2.2-9.6 3-13 629 931 931 3.34 1.52 1/4" Hex 8.44 214.5
*Speed with fully charged battery.
General: All tools must be used with a approved Cleco line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
(Apex u-Guard socket
shown above not included)
30
Electric Nutrunners – Cordless Transducer Control
Tube Nut Tools
“B”
T2, T3 & T4
Head Height
“A”
2.63” (67 mm) 1.56” (40 mm)
T2 Head T3 Head
1.44” (37 mm)
“A” “C”
“D”
T4 Head
1.94” (49 mm)
“A”
“C”
“D”
“C”
“D”
T3
T4
Tube Nut Series
Torque Range Bolt Size
10 - 40 Nm M6 - M8
7.4 - 29.5 Ft. Lbs. 1/4” - 7/16”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
47BTYSB20T2
The 47BT tube nut wrench alternates the
direction of rotation each time the lever is
actuated. When rotating in reverse, the
socket will stop at the open position.
Tube Nut Torque Range Free
Speed (RPM)
Weight
Less Battery
Max.
Drive
Size
Length w/
26V Battery
Head
A Width B Blade Ht. C Opening D End/Cntr.
Model Number Ft.Lbs. Nm 26V* 44V* Vmax lbs. kg in. mm in. mm in. mm in. mm in. mm
47BTYSB20T2 7.4-14.8 10-20 260 455 455 5.6 2.54 1/2" 23.6 598 1.42 36 0.55 14 0.28 7 0.53 13
47BTYSB30T3 11.1-22.1 15-30 188 329 329 5.6 2.53 3/4" 23.3 588 1.65 42 0.59 15 0.475 12 0.73 19
47BTYSB40T4 14.8-29.5 20-40 141 247 247 6.4 2.90 1 1/16" 29.9 612 2.36 60 0.59 15 0.675 17 0.93 24
*Speed with fully charged battery.
General: All tools must be used with a Cleco approved line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
To order individual sockets, use a “KS” prefix. (i.e. KS2EA01 for a T2, 1/4”, flush, thru hex socket.)
Tube Nut Tool Nomenclature Socket Nomenclature
Peripherals
S – Barcode Scanner
- – None
Battery
B-26V-48V
Series
47
Tool Style
T – Tube Nut
Power
B–Battery
Output Type
0 -Partial Thru Hex 2 -Double Thru Hex
1 -Thru Hex 3 -Partial Thru
Double Hex
Extension Length
0 – Flush 4 – 1/2”
2 – 1/4” 6 – 3/4”
Maximum Hex Socket Size
MG, EE T2 Head Type
MM T3 Head Type
MU T4 Head Type
00, ## (Specials) All Head Types
Socket Sizes
EA - 1/4” M5 – 5mm MH – 14mm MP – 22mm
EC – 3/8 M6 – 6mm MI – 15mm MQ – 23mm
EE – 1/2 MA – 7mm MJ – 16mm (5/8”) MR – 24mm (15/16”)
EF – 9/16 MB – 8mm (5/16) MK – 17mm MS – 25mm
EH – 11/16 MD – 10mm ML – 18mm MT – 26mm
EJ – 13/16 ME – 11mm (7/16) MM – 19mm (3/4”) MU – 27mm (1 1/16”)
EK – 7/8 MF – 12mm MN – 20mm
EM – 1 MG – 13mm MO – 21mm
47 B T X X x XX XX KSX XX XX X
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Head Type
T2 - 20 Nm
T3 - 30 Nm
T4 - 40 Nm
Thru Hex Double
Thru Hex
Partial
Thru Hex
Partial Thru
Double Hex
Head Type
KS2 – T2
KS3 – T3
KS4 – T4
Max Torque (Nm)
Under 60Nm, rounded up
to the nearest 1Nm. Over
60Nm, rounded to the
nearest 5Nm.
31
Electric Nutrunners – Cordless Transducer Control
Crowfoot Tools
.61”
(15.49)
.97”
(24.63)
.75”
(19)
3.00”
(76.2)
30°
R.63”
(16)
1.25”
(31.75)
1.50”
(38.1)
.25”
(6.35)
C3 – 30° Head (Part No. 301960)
Maximum Recommended Torque: 22 ft.lbs. (30 Nm)
15°
.61”
(15.49)
1.09”
(27.86)
.75”
(19)
3.00”
(76.2)
2.66”
(67.56)
1.50”
(38.1)
1.25”
(31.75)
R.63”
(16)
.25”
(6.35)
C1 – 15° Head (Part No. 301959)
Maximum Recommended Torque: 22 ft.lbs. (30 Nm)
Crowfoot Series
Torque Range Bolt Size
10.5 - 30 Nm M6 - M8
7.7 - 22.1 Ft. Lbs. 1/4” - 7/16”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
47BCYSB30C1
Crowfoot Torque Range Free Speed
(RPM) Weight Less Battery Max.
Drive
Size
Length w/26V Battery
Model Number ft. lbs. Nm 26V* 44V* Vmax lbs. kg in. mm
47BCYSB30C1 7.7-22.1 10.5-30 186 326 326 6.12 2.78 1/2” 26.26 667
47BCYSB30C3 7.7-22.1 10.5-30 186 326 326 6.12 2.78 3/4” 25.98 660
*Speed with fully charged battery.
General: All tools must be used with a Cleco approved line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
To order individual sockets, use a “CS” prefix before the required socket. (i.e. CSEE01 for a 1/2”, flush, thru hex socket.)
Socket Type
CS – Crowfoot
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Peripherals
– - None
S - Barcode
scanner
Series
47
Tool Style
C – Crowfoot
Battery Output Type
1 – Thru Hex
Extension Length
0 – Flush 4 – 1/2” 6 – 3/4”
Socket Size
EA - 1/4” MA – 7mm MF – 12mm
EC – 3/8 MB – 8mm (5/16) MG – 13mm
EE – 1/2 MC – 9mm MH – 14mm
EF – 9/16 MD – 10mm MI – 15mm*
ME – 11mm (7/16) *Fragile. Light duty apps.
Crowfoot Tool Nomenclature Socket Nomenclature
47 B C X X B XX XX CS XX X X
Head Type
C1 - 15°
C3 - 30°
Battery
B – 26V-48V
Max Torque (Nm)
Under 60Nm, rounded up
to the nearest 1Nm. Over
60Nm, rounded to the
nearest 5Nm.
32
Right Angle Torque Range Max.
Speed Weight* Output
Drive
Size
Length
Anglehead
Side to Center Height
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm in. mm
18EAE08AL2 1.5-5.9 2-8 3000 2.9 1.3 1/4” 13.6 345 0.51 13 1.4 36
18EAE15AM3 3.0-11.1 4-15 1300 3.3 1.5 3/8” 14.8 376 0.59 15 1.6 41
18EAE22AM3 3.7-16.2 5-22 920 3.3 1.5 3/8” 14.8 376 0.59 15 1.6 41
18EAE28AM3 4.4-20.7 6-28 700 3.3 1.5 3/8” 14.8 376 0.59 15 1.6 41
48EAE15AL3 2.2-11.1 3-15 2855 3.8 1.7 3/8” 15.7 398 0.59 15 1.6 41
48EAE28AL3 4.4-20.7 6-28 1300 4.1 1.9 3/8” 16.2 410 0.59 15 1.6 41
48EAE41AM3 6.6-30.2 9-41 1090 4.3 2.0 3/8” 17.3 440 0.75 19 1.9 48
48EAE58AM3 8.9-42.8 12-58 770 4.3 2.0 3/8” 17.3 440 0.75 19 1.9 48
48EAE58AM4 8.9-42.8 12-58 770 4.3 2.0 1/2” 17.3 440 0.75 19 1.9 48
48EAE90AH4 13.3-64.2 18-87 515 6.6 3.0 1/2” 18.5 470 0.81 21 2.3 58
48EAE105AH4 15.5-76.7 21-104 340 6.6 3.0 1/2” 18.5 470 0.81 21 2.3 58
48EAE135MH4 19.9-98.1 27-133 265 7.3 3.3 1/2” 19.1 485 0.94 24 2.4 61
48EAE175AX6 26.6-129.8 36-176 190 10.2 4.6 3/4” 21.6 549 1.06 27 2.7 69
48EAE230AX6 33.9-169.6 46-230 145 10.2 4.6 3/4” 21.6 549 1.06 27 2.7 69
*Weights are without tool cable and reaction bar.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector. Ball retainer optional.
Tools with Matrix connector available upon request
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Right Angle Series
Torque Range Bolt Size
2 - 230 Nm M5 - M16
1.5 - 169.6 Ft. Lbs. #10 - 5/8”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
18EAE28AM3
48EAE58AM3
Electric Nutrunners – Corded Transducer Control
Right Angle Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
18, 48
Tool Style
A – Right Angle
Power
E-Electric
XX E A E XXX XXX X
Output Drive
AL2 – 1/4” Sq.Dr. AM4 – 1/2” Sq.Dr.
AL3 – 3/8” Sq.Dr. AH4 – 1/2” Sq.Dr.
AM3 – 3/8” Sq.Dr. MH4 – 1/2” Sq.Dr.
AX6 – 3/4” Sq.Dr.
Retainer
- Pin retainer
B Ball retainer
Connector
Air-LB
33
Right Angle Torque Range Max.
Speed Weight* Output
Drive
Size
Length
Anglehead
Side to Center Height
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm in. mm
67EA235AL6 33.9-169.6 46-230 135 12.9 5.9 3/4” 25.8 655 1.03 26 2.3 58
67EA255AL6 40.6-188.1 55-255 115 12.9 5.9 3/4” 25.8 655 1.03 26 2.3 58
67EA310ML6 44-229 60-310 100 20.2 9.2 3/4” 29.1 739 1.06 27 2.55 65
67EA340AM6 51.6-247.1 70-335 90 21.0 9.5 3/4” 31.6 803 1.38 35 3.1 79
67EA460AM6 70.1-339.3 95-460 66 21.0 9.5 3/4” 31.6 803 1.38 35 3.1 79
67EA570AM6? 84.8-420.4 115-570 53 21.0 9.5 3/4” 31.6 803 1.38 35 3.1 79
67EA860AH8 129.1-634.3 175-860 33 22.7 10.3 1” 25.3 643 1.50 38 9.32 237
67EA1035AH8 154.9-763.3 210-1035 25 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
67EA1340AH8 199.1-988.3 270-1340 20 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
67EA1700AH8 250.8-1253.8 340-1700 16 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
67EA2010AH8 295.0-1475.0 400-2000 13 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
*Weights are without tool cable and reaction bar.
Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco
Global Controller.
?Note: Contact regional application ceneter for implementation assistance.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Matrix Connector.
Extra Equipment: Std. tool cable 542778-XX, RA swivel cable 544055-XX,
Inline swivel cable 544056-XX, Extension cable 542779-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Right Angle Series
Torque Range Bolt Size
46 - 2000 Nm M18 - M36
34 - 1475 Ft. Lbs. 3/4” - 1 1/2”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
67EA235AL6
Electric Nutrunners – Corded Transducer Control
Right Angle Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
67
Tool Style
A – Right Angle
Power
E-Electric
XX E A XXXX XXX X
Output Drive
AL6 – 3/4” Sq.Dr.
AM6 – 3/4” Sq.Dr.
ML6 – 3/4” Sq.Dr.
AH8 – 1” Sq.Dr.
Retainer
- Pin retainer
B Ball retainer
Isolation
Transformer
544185PT
Incoming
Power
115/230VAC
Matrix Tool
Cable
542778-XM
Cleco 67 Series Tool
Air-Lb Cable
Power
Cable
All 67 Series Tools require an isolation
transformer (544185PT) for use with Cleco
Global Controller.
34
Inline Non-Floating Series
Torque Range Bolt Size
2 - 150 Nm M5 - M14
1.5 - 110 Ft. Lbs. #10 - 5/8”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
48ESE25D3
18ESE06Q
Inline Non-Floating Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
18ESE06Q 1.5-4.4 2-6 4000 2.5 1.1 1/4” Hex 12.3 312 0.91 23
18ESE06D2 1.5-4.4 2-6 4000 2.5 1.1 1/4” 11.8 300 0.91 23
18ESE12Q 2.2-8.9 3-12 1820 2.7 1.2 1/4” Hex 13.0 330 0.91 23
18ESE12D3 2.2-8.9 3-12 1820 2.7 1.2 3/8” 12.4 315 0.91 23
18ESE17Q 3.0-12.5 4-17 1290 2.7 1.2 1/4” Hex 13.0 330 0.91 23
18ESE17D3 3.0-12.5 4-17 1290 2.7 1.2 3/8” 12.4 315 0.91 23
18ESE22D3 3.7-16.2 5-22 985 2.7 1.2 3/8” 12.4 315 0.91 23
18ESE31D3 5.2-22.9 7-31 695 2.7 1.2 3/8” 12.4 315 0.91 23
48ESE12Q 2.2-8.9 3-12 4000 3.0 1.4 1/4” Hex 13.5 343 0.91 23
48ESE12D2 2.2-8.9 3-12 4000 3.0 1.4 1/4” 13.0 330 0.91 23
48ESE25D3 4.4-18.4 6-25 1820 3.2 1.5 3/8” 13.6 345 0.91 23
48ESE36D3 5.9-26.6 8-36 1290 3.2 1.5 3/8” 13.6 345 0.91 23
48ESE48D3 7.4-35.4 10-48 985 3.3 1.5 3/8” 13.8 351 0.91 23
48ESE65D4 9.6-47.9 13-65 750 5.3 2.4 1/2” 16.6 420 1.13 29
48ESE90D4 14.0-66.4 19-90 510 5.6 2.5 1/2” 17.1 435 1.13 29
48ESE125D4 19.2-92.2 26-125 360 5.6 2.5 1/2” 17.1 435 1.13 29
48ESE150D4 22.9-110.6 31-150 240 5.6 2.5 1/2” 17.1 435 1.13 29
*Weights are without tool cable.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector; Dead Handle is included with 18ES12Q and
18ES12D3. Ball retainer optional.
Tools with Matrix connector available upon request.
Reaction bar is included with inline tools with output torques of 17-150 NM.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Mounting Plates: 543231 - (all with exception of listed below)
543235 - 18ESE06Q/D2, 48ESE12Q/D2
49087108 - 48ESE65D4, 48ESE90D4, 48ESE125D4, & 48ESE150D4.
See page 127 for mounting plate dimensions.
Additional Accessories: See pages 121-129 for additional accessories.
Electric Nutrunners – Corded Transducer Control
Inline Non-Floating Spindle Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
18, 48
Tool Style
S – Inline
Power
E-Electric
XX E S E XXX XX X
Output Drive
Q – Quick change D3 – 3/8” Sq.Dr.
D2 – 1/4” Sq.Dr. D4 – 1/2” Sq.Dr.
Retainer
- Pin retainer
B Ball retainer
Connector
Air-LB
35
Isolation
Transformer
544185PT
Incoming
Power
115/230VAC
Matrix Tool
Cable
542778-XM
Cleco 67 Series Tool
Air-Lb Cable
Power
Cable
All 67 Series Tools require an isolation
transformer (544185PT) for use with Cleco
Global Controller.
Inline Non-Floating Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
67ES65D4 10-47 13-64 535 10.3 4.7 1/2” 21.0 533 1.31 33
67ES105D4 15-77 21-104 330 10.3 4.7 1/2” 21.0 533 1.31 33
67ES135D4 20-100 27-135 245 10.3 4.7 1/2” 21.0 533 1.31 33
67ES190D6 28-140 38-190 165 11.6 5.3 3/4” 20.5 521 1.31 33
67ES285D6 42-210 57-285 115 11.6 5.3 3/4” 20.5 521 1.31 33
67ES385D6 57-285 77-386 83 11.6 5.3 3/4” 20.5 521 1.31 33
67ES475D6 70-350 95-475 67 12.0 5.4 3/4” 20.9 531 1.31 33
67ES610D6 90-450 122-610 50 12.0 5.4 3/4” 20.9 531 1.31 33
67ES850D8 125-625 170-848 33 17.0 7.7 1” 23.8 605 1.50 38
67ES1050D8 155-775 210-1050 27 17.0 7.7 1” 23.8 605 1.50 38
67ES1670D8 246-1230 334-1668 17 17.0 7.7 1” 23.8 605 1.50 38
67ES2060D8 304-1520 412-2060 14 17.0 7.7 1” 23.8 605 1.50 38
67ES4050D12 597-2985 810-4050 6 45.2 20.5 1 1/2” 24.5 622 2.35 60
*Weights are without tool cable or reaction bar if so equipped.
Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco
Global Controller.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Matrix Connector; Reaction bar; Slave drive reaction bar
on 67ES4050D12.
Extra Equipment: Std. tool cable 542778-XX, RA swivel cable 544055-XX,
Inline swivel cable 544056-XX, Extension cable 542779-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Inline Non-Floating Series
Torque Range Bolt Size
13 - 4050 Nm M10 - M42
10 - 2985 Ft. Lbs. 7/16” - 1 3/4”
■ Brushless precision
