935170 Infrared interface cable
935998 70Nm RA, Crowfoot/Tubenut holder
935999 70Nm RA, Crowfoot/Tubenut holder w/infrared interface
935290 935170
935144
541715-2
Tool Suspension Bail
Part No. Descrtption
541715-2 Angle tool swivel bail
Model No.
Weight Width Length Depth
lbs. kg in. mm in. mm in. mm
961350PT 6.8 3.1 9.4 240 4.7 120 5.9 150
2M power cable included.
Vmax Power Module
2.4GHz to 5.0GHz Upgrade Kit
mPro400GC Program & OS Software
Part No. Descrtption
544163PT CompactFlash Module Programmed
Upgrades are available at your local ATG Application Center to
upgrade the W and X series 2.4GHz tools to a 5.0GHz Y series tool.
544249PT
Part No. Descrtption
961390 XBEE 802.15.4 Base Station
544249PT WLAN Dual Band 2.4/5GHz (US)
961453PT WLAN Dual Band 2.4/5GHz (EU)
Radio Range: 30-50 meters (XBEE 30 meters max.)
IEEE 802.11a/b/g (depending on tool)
Max. Tools: 16 (Contact Regional Support Center for
requirements greater than 10)
LiveWire Communication Access Points
124
Accessories
Part No. Descrtption
544197PT System Bus Terminator
544196-005 System Bus Cable - 0.5M
544196-020 System Bus Cable - 2M
544196-050 System Bus Cable - 5M
544196-100 System Bus Cable - 10M
544196-200 System Bus Cable - 20M
544196-250 System Bus Cable - 25M
544196-500 System Bus Cable - 50M
S133437 System Bus 16 I/O Expander
S133436 System Bus 32 I/O Expander
S133410 System Bus 4-Position Socket Tray
S133411 System Bus 8-Position Socket Tray
S133406 System Bus Control Box with Buzzer
S133405 System Bus Stack Light without Buzzer
S133420 System Bus Stack Light with Buzzer
System Bus Accessories
Part No. Descrtption
543446-7 Ethernet Crossover Cable - 7ft.
543445-7 Ethernet Patch Cable - 7ft.
543445-50 Ethernet Patch Cable - 50ft.
543445-100 Ethernet Patch Cable - 100ft.
543490-10 Serial Null Modem Cable - 3M
543444-8 Ethernet Switch - 8 Port
543444-16 Ethernet Switch - 16 Port
543444-24 Ethernet Switch - 24 Port
Network Accessories
S133410
Socket Tray
S133406
Control Box
with Buzzer
S133420
Stack Light
with Buzzer
544171PT
Fieldbus
Devicenet
544173PT
Fieldbus Profibus
544174PT
Fieldbus Profinet
544172PT
Fieldbus
Ethernet-IP
Part No. Descrtption
544171PT Fieldbus Devicenet
544172PT Fieldbus Ethernet-IP
544173PT Fieldbus Profibus
544174PT Fieldbus Profinet
544211PT Fieldbus Modbus/TCP
Fieldbus Accessories
Discrete Input Accessories
Discrete Output Accessories
Torque Selector Switches
Part No. Descrtption
542977-8 Torque Selector – 8 Position
542977-16 Torque Selector – 16 Position
542977-32 Torque Selector – 32 Position
542977-64 Torque Selector – 64 Position 542977-8
Annunciators
Part No. Descrtption
542976-1 Annunciator – 1 Spindle
542976-2 Annunciator – 2 Spindle
542976-3 Annunciator – 3 Spindle
542976-4 Annunciator – 4 Spindle
542976-5 Annunciator – 5 Spindle
542976-6 Annunciator – 6 Spindle
542976-1
Start/Stop Switches
Part No. Descrtption
542972 Start Box
542973 Stop Box
542974 Start/Stop Box
542975 Start/Stop/Reverse
542975
Part No. Descrtption
544237-1M Accessory Input Cable - 1M
544237-5M Accessory Input Cable - 5M
544237-10M Accessory Input Cable - 10M
544237-15M Accessory Input Cable - 15M
542986-1M Accessory to Accessory Cable - 1M
542986-5M Accessory to Accessory Cable - 5M
542986-10M Accessory to Accessory Cable - 10M
542986-15M Accessory to Accessory Cable - 15M
544238-1M Accessory Output Cable - 1M
544238-5M Accessory Output Cable - 5M
544238-10M Accessory Output Cable - 10M
544238-15M Accessory Output Cable - 15M
Accessory Cables
Socket Only Trays
Part No. Descrtption
542978-4 Socket Tray – 4 Position
542978-8 Socket Tray – 8 Position
Notes: Up to 16 linked 4 position trays maximum.
Minimum socket O.D. 1”. Maximum O.D. 2.25”.
See below for Socket Posts and Lockout Washers 542978-4
Bits & Socket Trays (Global Controller Only)
Part No. Descrtption
544241PT Tray – 4 Position with 10m cable
544242PT Tray – 8 Position with 10m cable
S970716 Replacement Inserts
Maximum socket diameter 1.125”.
544241PT
S970716
Socket Posts
For use with 542978-4 & 542978-8 socket trays.
Part No. Socket Post Size Part No. Socket Post Size
99249181 .550/.540 99249158 .687/.677
99249169 1.062/1.052 99249157 .875/.865
99249165 .590/.580 99249156 1.000/.990
99249164 .945/.935 99249148 1.125/1.115
99249163 .827/.817 99249147 .938/.928
99249162 .709/.699 99249104 .750/.740
99249161 .625/.615 99249103 .669/.659
99249160 .437/.432 99249102 .562/.552
99249159 .812/.802 99249101 .500/.490
Note: Select socket post size within tolerance of socket used.
Choose largest socket post size (diameter) that will accept the hex size of the intended socket.
Part Number Note
99248150 Vacant position lockout washer
Required for unused positions on the 542978-4 & 542978-8 socket tray.
Lockout Washer
For use with 542978-4 & 542978-8 socket trays.
125
Accessories
Lever Extension Kits
Descrtption Part No.
Lever Extension Kit (non-swivel) 541757
Lever Extension Kit (swivel) 543414
Note: Models for standard tool cable (non-swivel) and swivel cable.
Suspension Bail
Descrtption Part No.
Tool suspension bail 1110909
Medium to Hard Torque
Belleville Washer Test Fixture is clamped in a vise
and used to test tools (10 In. Lbs. – 100 Ft. Lbs.,
1.13Nm – 135.6Nm). Washers can be rearranged
to simulate “hard” or “soft” joints.
Test Fixture
536185
Part Number
3/4” Hex
100 Ft.Lbs.
Max. 1/2” Hex
25 Ft.Lbs.
Max.
Double Joint Simulators/Test Fixture
? Separate simulator for soft and hard joint
? Inclusive mounting plate
W09164K 5 Nm hard joint/15 Nm soft joint
W08780K 10 Nm hard joint/35 Nm soft joint
W08779K 20 Nm hard joint/55 Nm soft joint
Part Number Descrtption
W08779K
Tool & Cable Tester
Part No. Descrtption
961024 Tool & cable tester
tool memory programming
542991 Tool & cable tester
Note: Adapter cable required for Air-Lb tools. Contact Tech Service.
Joint Simulator
Joint simulators are most frequently used to certify the
repeatability of nutrunners before being installed on a production
line and are also an excellent means of testing nutrunners
following repair.
The Joint Simulator can simulate and test the torque output of
nutrunners on both hard and soft joints. Each Joint Simulator
is supplied with a quantity of spring washers which are used to
test tool accuracy. Torque per revolution is varied by stacking the
spring washers in different combinations.
Electronic torque testing is
accomplished by attaching
an external rotary transducer
between the tool’s square drive
and the socket.
■ Easy access, load, set-up
and maintenance.
■ Heavy-duty and economical.
■ Adjustable torque reaction
bracket can accommodate
virtually any tool.
■ For use with reversible/
non-reversible tools.
Part No. Torque Range Width Height Length
Ft. Lbs. Nm in. mm in. mm in. mm
550006 12-220 15-300 10.4 264 16 406 26.5 667
126
Accessories
Tool Type Model Number Cover Swivel Bail Mounting Plate Extension
Right Angle 17/18EA…AL2 205832 541715-2 ------ ------
17/18EA…AM3 205834 541715-2 ------ ------
47EA…AM3/4 543070 541715-2 543235 542428
47/48EA…AH4 543070 541715 543230 535833
47/48EA135MH4 543071 541715 543230 535833
47/48EA…AX6 205838 541715 543232 ------
67EA…AL6 205838 35007004 49097101 (included with tool) 48316033
67EA…AM6 ------ 48A17006 45017152 (included with tool) ------
Flush Socket 17/18EA…F1… ------ 541715-2 57217101 (requires 57218103 screw) ------
47/48EA…F2… ------ 541715-2 43287131 ------
47/48EA…F3… ------ 541715-2 49097101(requires 49098103 locknut) ------
47/48EA…F4… 205838 541715 49097101(requires 49098103 locknut) 48316033
Hold-N-Drive 47/48EA …H…over 100NM 205838 541715 49097101(requires 49098103 locknut) 48316033
47/48EA …H…under 100NM 205838 541715-2 49097101(requires 49098103 locknut) 48316033
127
? .328 ± .006/.000
CSK ? .346 x 60°
4 Places
? 2.374±.001
1.800 -X-
.375
3.15
2.50
2.46
.735
543230
? .328 ± .006/.000
V ? .346 x 60°
Both Sides
2 Places
3.00
1.750 .600
2.545 1.985
543235
543232
543231
49087108
Inline Tools Mounting Plates
128
R1 MAX
R1 MIN
R2 MIN
H MIN
H MAX
R2 MAX
Balance Arm Operating Envelope
MODEL
R1 MAX R1 MIN R2 MAX R2 MIN H MAX H MIN
in. mm in. mm in. mm in. mm in. mm in. mm
SBA-12 24 610 2 51 18 457 8 203 15 381 6 152
SBA-18 30 762 6 152 20 508 7 178 15 381 0 0
PBA-12 26 660 3 76 20 508 7 178 17 432 8 203
PBA-18 32 813 8 203 22 559 6 152 17 432 2 51
Single Arms Parallel Arms Dimensions
Model No. Code No. Model No. Code No.
A B C D
in. mm in. mm in. mm in. mm
Air Cylinder Models
CSBA18 520160 CPBA-18 520170 12 305 18 457 18 457 - -
CSBA-24 520200 12 305 24 610 18 457 - -
CSBA-30 520201 CPBA-30 520203 12 305 30 762 18 457 - -
CSBA-12-AH 520165 CPBA-12-AH 520178 12 305 12 305 - - 30 762
CSBA-18-AH 520162 CPBA-18-AH 520172 12 305 18 457 - - 30 762
CSBA-30-AH 520167 CPBA-30-AH 520215 12 305 30 762 - - 30 762
CPBA-30-WM 520207 12 305 30 762 - - - -
Spring Models
SBA-12 520001 PBA-12 520007 12 305 12 305 18 457 - -
SBA-18 520004 PBA-18 520010 12 305 18 457 18 457 - -
PBA-24 520045 12 305 24 610 18 457 - -
SBA-12-AH 520003 PBA-12-AH 520009 12 305 12 305 - - 30 762
SBA-18-AH 520006 PBA-18-AH 520012 12 305 18 457 - - 30 762
SBA-24-AH 520110 PBA-24-AH 520047 12 305 24 610 - - 30 762
SBA-30-AH 520044 PBA-30-AH 520050 12 305 30 762 - - 30 762
PBA-18-18-AH 520036 18 457 18 305 - - 30 762
PBA-12-WM 520008 12 305 12 305 - - - -
SBA-30-WM 520043 12 305 30 762 - - - -
AH = Adjustable Height WM = Wall Mounted
Tool weight capacity: 10 lbs. (4.6 kg) Air Cylinder models
5 lbs. (2.3 kg) Spring models
Torque capacity: 10 ft. lbs. (13.5 Nm)
Standard Equipment: Operating Instructions and Service Manual.
Regulator for Air Cylinders.
Threaded Nipples for CSBA Models
1/4 NPT Hex Nipple: 204032 1/4 NPT x 1/8 NPT Hex
Reducer Nipple: 204137
Optional Equipment: Additional accessories: See page 71.
■ Ball bearing construction
■ Supports tools weighing up to 5 lbs. (spring models)
or up to 10 lbs. (air cylinder models).
■ Post, wall, or adjustable height post mounting
■ Single or parallel arms
Tools not included
Air Cylinder
Parallel Arm
cpba-18-ah
Spring
Parallel Arm
pba-18
Mount
- – Post
AH – Adjustable Height
WM – Wall Mount
Series
CS – Air cylinder,
single arm
S – Spring,
single arm
CP – Air cylinder,
parallel arm
P – Spring,
parallel arm
Tool Type
BA – Balance Arm
18EAE08AL2
2,0-8,0
3000
1,3
1/4”
345
13
36
