Attachment
Angle drive
Straight Offset
2 56 44 59
3 75 50 68
4 80 62 86
5 106 74 101
6 130 89 118
7 151 102 137
DGD Fixtured Spindles 25 - 153 Nm
Size 2, Single Transducer (torque+angle)
95
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
56 481 6,5 2BB-2B100A-2K1M-2ZA 946783C8 910609 180 S308435
56 481 6,5 2BB-2B150A-2K2M-2ZA 946787C4 910609 180 S308435
56 310 7,5 2BUB-2B100A-2K1M-2ZA 946832C8 910609 180 S308435
56 310 7,5 2BUB-2B150A-2K2M-2ZA 946836C4 910609 180 S308435
44 504 8,1 2BB-2B100A-2VK1M 946785C6 910609 180 S308438
44 504 8,1 2BB-2B150A-2VK2M 946789C2 910609 180 S308438
44 333 9,1 2BUB-2B100A-2VK1M 946834C6 910609 180 S308438
44 333 9,1 2BUB-2B150A-2VK2M 946838C2 910609 180 S308438
For angle attachement
59 505 7,6 2BB-2B100A-2WK1M 946900C5 929053
59 505 7,6 2BB-2B150A-2WK2M 946904C1 929053
For angle attachement
59 335 8,6 2BUB-2B100A-2WK1M 946902C3 929053
59 335 8,6 2BUB-2B150A-2WK2M 946906C9 929053
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
96
Torque
Range
Speed
Float
Square
Drive
RPM Nm max. mm inch Straight attachment, twin transducer (redundant)
25-102 329 50 1/2" 30-153 219 50 1/2" Straight attachment with reversible gears, twin transducer (redundant)
25-102 329 50 1/2" 30-153 219 50 1/2" Offset attachment, twin transducer (redundant)
25-102 307 50 1/2" 30-153 204 50 1/2" Offset attachment with reversible gears, twin transducer (redundant)
25-102 307 50 1/2" 30-153 204 50 1/2" Angle attachment, twin transducer (redundant)
25-102 310 25 1/2" 30-153 206 25 1/2" Angle attachment with reversible gears, twin transducer (redundant)
25-102 310 25 1/2" 30-153 206 25 1/2" Smallest scribed circle diameter in mm
Number of spindles
Model 2
Attachment
Angle drive
Straight Offset
2 56 44 59
3 75 50 68
4 80 62 86
5 106 74 101
6 130 89 118
7 151 102 137
DGD Fixtured Spindles 25 - 153 Nm
Size 2, Twin Transducer (redundant) - (2x torque + 2x angle)
97
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
56 578 7.6 2BB-2B100A-2/2K1M-2ZA 946784C7 910609 180 S308435
56 578 7.6 2BB-2B150A-2/2K2M-2ZA 946788C3 910609 180 S308435
56 407 8.6 2BUB-2B100A-2/2K1M-2ZA 946833C7 910609 180 S308435
56 407 8.6 2BUB-2B150A-2/2K2M-2ZA 946837C3 910609 180 S308435
44 601 9.2 2BB-2B100A-2K1M-2VK1M 946786D3 910609 180 S308438
44 601 9.2 2BB-2B150A-2K2M-2VK2M 946790D7 910609 180 S308438
44 430 10.2 2BUB-2B100A-2K1M-2VK1M 946835D3 910609 180 S308438
44 430 10.2 2BUB-2B150A-2K2M-2VK2M 946839D9 910609 180 S308438
For angle attachement
59 602 8.7 2BB-2B100A-2K1M-2WK1M 946901D2 929053
59 602 8.7 2BB-2B150A-2K2M-2WK2M 946905D8 929053
For angle attachement
59 432 9.7 2BUB-2B100A-2K1M-2WK1M 946903D0 929053
59 432 9.7 2BUB-2B150A-2K2M-2WK2M 946907D6 929053
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
98
Torque
Range
Speed
Float
Square
Drive
RPM Nm max. mm inch Straight drive, single transducer
30-180 339 50 3/4" 50-260 220 50 3/4" Straight drive with reversible gears, single transducer
30-180 339 50 3/4" 50-260 220 50 3/4" Offset drive, single transducer
30-180 315 50 3/4" 50-260 204 50 3/4" Offset drive with reversible gears, single transducer
30-180 315 50 3/4" 50-260 204 50 3/4" Angle drive, single transducer
30-180 327 25 3/4" 50-260 211 25 3/4" Angle drive with reversible gears, single transducer
30-180 327 25 3/4" 50-260 211 25 3/4" DGD Fixtured Spindles 30 - 260 Nm
Size 3, Single Transducer (torque+angle)
Smallest scribed circle diameter in mm
Number of spindles
Model 3
Attachment
Angle drive
Straight Offset
2 81 59 81
3 94 69 94
4 116 84 116
5 139 102 139
6 164 122 164
7 189 138 189
99
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
81 558 13.1 3BB-3B180A-3K1M-3ZA 946816C8 910613 185 S308436
81 558 13.1 3BB-3B260A-3K2M-3ZA 946818C6 910613 185 S308436
81 366 15.1 3BUB-3B180A-3K1M-3ZA 946824C8 910613 185 S308436
81 366 15.1 3BUB-3B260A-3K2M-3ZA 946826C6 910613 185 S308436
59 553 14.2 3BB-3B180A-3VK1M 946820C2 910613 185 S308439
59 553 14.2 3BB-3B260A-3VK2M 946822C0 910613 185 S308439
59 361 16.1 3BUB-3B180A-3VK1M 946828C4 910613 185 S308439
59 361 16.1 3BUB-3B260A-3VK2M 946830C0 910613 185 S308439
For angle attachement
81 607 16.8 3BB-3B180A-3WK1M 946916C7 929065
81 607 16.8 3BB-3B260A-3WK2M 946920C1 929065
For angle attachement
81 415 18.8 3BUB-3B180A-3WK1M 946918C5 929065
81 415 18.8 3BUB-3B260A-3WK2M 946922C9 929065
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
100
Torque
Range
Speed
Float
Square
Drive
RPM Nm max. mm inch Straight attachment, twin transducer (redundant)
30-180 339 50 3/4" 50-260 220 50 3/4" Straight attachment with reversible gears, twin transducer (redundant)
30-180 339 50 3/4" 50-260 220 50 3/4" Offset attachment, twin transducer (redundant)
30-180 315 50 3/4" 50-260 204 50 3/4" Offset attachment with reversible gears, twin transducer (redundant)
30-180 315 50 3/4" 50-260 204 50 3/4" Angle attachment, twin transducer (redundant)
30-180 327 25 3/4" 50-260 211 25 3/4" Angle attachment with reversible gears, twin transducer (redundant)
30-180 327 25 3/4" 50-260 211 25 3/4" DGD Fixtured Spindles 30 - 260 Nm
Size 3, Twin Transducer (redundant) - (2x torque + 2x angle)
Smallest scribed circle diameter in mm
Number of spindles
Model 3
Attachment
Angle drive
Straight Offset
2 81 59 81
3 94 69 94
4 116 84 116
5 139 102 139
6 164 122 164
7 189 138 189
101
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
81 670 15.2 3BB-3B180A-2/3K1M-3ZA 946817C7 910613 185 S308436
81 670 15.2 3BB-3B260A-2/3K2M-3ZA 946819C5 910613 185 S308436
81 478 17.2 3BUB-3B180A-2/3K1M-3ZA 946825C7 910613 185 S308436
81 478 17.2 3BUB-3B260A-2/3K2M-3ZA 946827C5 910613 185 S308436
59 665 16.3 3BB-3B180A-3K1M-3VK1M 946821D9 910613 185 S308439
59 665 16.3 3BB-3B260A-3K2M-3VK2M 946823D7 910613 185 S308439
59 473 18.2 3BUB-3B180A-3K1M-3VK1M 946829D1 910613 185 S308439
59 473 18.2 3BUB-3B260A-3K2M-3VK2M 946831D7 910613 185 S308439
For angle attachement
81 719 18.9 3BB-3B180A-3K1M-3WK1M 946917D4 929065
81 719 18.9 3BB-3B260A-3K2M-3WK2M 946921D8 929065
For angle attachement
81 527 20.9 3BUB-3B180A-3K1M-3WK1M 946919D2 929065
81 527 20.9 3BUB-3B260A-3K2M-3WK2M 946923D6 929065
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
102
Torque
Range
Speed
Float
Square
Drive
RPM Nm max. mm inch Straight drive, single transducer
120-360 266 50 3/4" 160-460 209 50 3/4" 220-630 141 50 1" Straight drive with reversible gears, single transducer
120-360 266 50 3/4" 160-460 209 50 3/4" 220-630 141 50 1" Offset drive, single transducer
120-360 249 50 3/4" 160-460 196 50 3/4" 220-630 133 50 1" Offset drive with reversible gears, single transducer
120-360 249 50 3/4" 160-460 196 50 3/4" 220-630 133 50 1" Angle drive, single transducer
120-360 257 25 3/4" 160-460 202 25 1" 220-630 136 25 1" Angle drive with reversible gears, single transducer
120-360 257 25 3/4" 160-460 202 25 1" 220-630 136 25 1" DGD Fixtured Spindles 120 - 630 Nm
Size 4, Single Transducer (torque+angle)
Smallest scribed circle diameter in mm
Number of spindles
Model 4
Attachment
Angle drive
Straight Offset
2 91 76 112
3 122 88 130
4 130 108 160
5 174 130 192
6 217 153 224
7 246 180 263
103
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
91 689 20 4BB-4B360A-4K1M-4ZA 947006C6 916643 190
91 689 20 4BB-4B460A-4K2M-4ZA 947008C4 916643 190
91 689 20 4BB-4B630A-4K3M-4ZA 947010C0 916642 185
91 497 21.5 4BUB-4B360A-4K1M-4ZA 947018C2 916643 190
91 497 21.5 4BUB-4B460A-4K2M-4ZA 947020C8 916643 190
91 497 21.5 4BUB-4B630A-4K3M-4ZA 947022C6 916642 185
76 655 21.5 4BB-4B360A-4VK1M 947012C8 912106 190 S308440
76 655 21.5 4BB-4B460A-4VK2M 947014C6 912106 190 S308440
76 655 21.5 4BB-4B630A-4VK3M 947016C4 912147 186 S308474
76 463 23.0 4BUB-4B360A-4VK1M 947024C4 912106 190 S308440
76 463 23.0 4BUB-4B460A-4VK2M 947026C2 912106 190 S308440
76 463 23.0 4BUB-4B630A-4VK3M 947028C0 912147 186 S308474
For angle attachement
112 645 26.1 4BB-4B360A-4WK1M 947036C0 929077
112 645 26.1 4BB-4B460A-4WK2M 947038C8 929089
112 645 26.1 4BB-4B630A-4WK3M 947040C4 929089
For angle attachement
112 453 27.7 4BUB-4B360A-4WK1M 947042C2 929077
112 453 27.7 4BUB-4B460A-4WK2M 947044C0 929089
112 453 27.7 4BUB-4B630A-4WK3M 947046C8 929089
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
104
Torque
Range
Speed
Float
Square
Drive
RPM Nm max. mm inch Straight drive, single transducer
400-1250 71 50 1" 540-1600 56 50 1 1/2" Straight drive with reversible gears, single transducer
400-1250 71 50 1" 540-1600 56 50 1 1/2" Offset drive, single transducer
Tightening Spindle BB Series special version - detailed drawings on request
750-800 110 50 1" Offset drive, single transducer
Tightening Spindle BB Series special version - detailed drawings on request
400-1100 75 50 1" Offset drive with reversible gears, single transducer
Tightening Spindle BB Series special version - detailed drawings on request
750-800 110 50 1" Offset drive with reversible gears, single transducer
Tightening Spindle BB Series special version - detailed drawings on request
400-1100 75 50 1" DGD Fixtured Spindles 400 - 2800* Nm
Size 4, Single Transducer (torque+angle)
*2800 Nm spindle available on request.
105
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
121 742 28 4BB-4B360A-4K1MS-4Z1250A 7355226401 S976956 140
121 742 28 4BB-4B460A-4K2MS-4Z1600A 7355226402 S308441 140
121 550 30 4BUB-4B360A-4K1MS-4Z1250A 7355226403 S976956 140
121 550 30 4BUB-4B460A-4K2MS-4Z1600A 7355226404 S308441 140
76 655 22.0 4BB-4B630A-4VK4MS 7348426116 912147 186 S308474
85 792 4BB-4B630A-4K3MS-F13 7348426114 916900
76 463 23.5 4BUB-4B630A-4VK4MS 7348426117 912147 186 S308474
85 600 4BUB-4B630A-4K3MS-F13 7348426115 916900
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
106
Torque
Range
Speed
Float
Square
Drive
RPM Nm max. mm inch Straight attachment, twin transducer (redundant)
120-360 266 50 3/4" 160-460 209 50 3/4" 220-630 141 50 1" Straight attachment with reversible gears, twin transducer (redundant)
120-360 266 50 3/4" 160-460 209 50 3/4" 220-630 141 50 1" Offset attachment, twin transducer (redundant)
120-360 249 50 3/4" 160-460 196 50 3/4" 220-630 133 50 1" Offset attachment with reversible gears, twin transducer (redundant)
120-360 249 50 3/4" 160-460 196 50 3/4" 220-630 133 50 1" Angle attachment, twin transducer (redundant)
120-360 257 25 3/4" 160-460 202 25 1" 220-630 136 25 1" Angle attachment with reversible gears, twin transducer (redundant)
120-360 257 25 3/4" 160-460 202 25 1" 220-630 136 25 1" DGD Fixtured Spindles 120 - 630 Nm
Size 4, Twin Transducer (redundant) - (2x torque + 2x angle)
Smallest scribed circle diameter in mm
Number of spindles
Model 4
Attachment
Angle drive
Straight * Offset
2 91 121 76 112
3 122 152 88 130
4 130 172 108 160
5 174 230 130 192
6 217 281 153 224
7 246 327 180 263
107
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
91 817 23 4BB-4B360A-2/4K1M-4ZA 947007C5 916643 190
91 817 23 4BB-4B460A-2/4K2M-4ZA 947009C3 916643 190
91 817 23 4BB-4B630A-2/4K3M-4ZA 947011C9 916642 186
91 625 24.5 4BUB-4B360A-2/4K1M-4ZA 947019C1 916643 190
91 625 24.5 4BUB-4B460A-2/4K2M-4ZA 947021C7 916643 190
91 625 24.5 4BUB-4B630A-2/4K3M-4ZA 947023C5 916642 186
76 782 24.5 4BB-4B360A-4K1M-4VK1M 947013D5 912106 190 S308440
76 782 24.5 4BB-4B460A-4K2M-4VK2M 947015D3 912106 190 S308440
76 782 24.5 4BB-4B630A-4K3M-4VK3M 947017D1 912147 186 S308474
76 590 26.0 4BUB-4B360A-4K1M-4VK1M 947025D1 912106 190 S308440
76 590 26.0 4BUB-4B460A-4K2M-4VK2M 947027D9 912106 190 S308440
76 590 26.0 4BUB-4B630A-4K3M-4VK3M 947029D7 912147 186 S308474
For angle attachement
112 772 29.1 4BB-4B360A-4K1M-4WK1M 947037D7 929077
112 772 29.1 4BB-4B460A-4K2M-4WK2M 947039D5 929089
112 772 29.1 4BB-4B630A-4K3M-4WK3M 947041D1 929089
For angle attachement
112 580 30.7 4BUB-4B360A-4K1M-4WK1M 947043D9 929077
112 580 30.7 4BUB-4B460A-4K2M-4WK2M 947045D7 929089
112 580 30.7 4BUB-4B630A-4K3M-4WK3M 947047D5 929089
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
108
Torque
Range
Speed
Float
Square
Drive
RPM Nm max. mm inch Straight attachment, twin transducer (redundant)
400-1250 71 50 1" 540-1600 56 50 1 1/2" Straight attachment with reversible gears, twin transducer (redundant)
400-1250 71 50 1" 540-1600 56 50 1 1/2" Offset attachment, twin transducer (redundant)
Tightening Spindle BB Series special version - detailed drawings on request
750-800 110 70 1" Offset attachment, twin transducer (redundant)
Tightening Spindle BB Series special version - detailed drawings on request
400-1100 75 50 1" Offset attachment with reversible gears, twin transducer (redundant)
Tightening Spindle BB Series special version - detailed drawings on request
750-800 110 70 1" Offset attachment with reversible gears, twin transducer (redundant)
Tightening Spindle BB Series special version - detailed drawings on request
400-1100 75 50 1" DGD Fixtured Spindles 400 - 2800* Nm
Size 4, Twin Transducer (redundant) - (2x torque + 2x angle)
*2800 Nm spindle available on request.
109
Min. Center-
Center
L Weight
Design
Order No.
DGD
Spindle
Floating Adapter
Floating Adapter
incl. guide housing
mm mm kg Order No. X (mm) Order No.
121 868 4BB-4B360A-2/4K1MS-4Z1250A 7355226405 S976956 140
121 868 4BB-4B460A-2/4K2MS-4Z1600A 7355226406 S308441 140
121 677 4BUB-4B360A-2/4K1MS-4Z1250A 7355226407 S976956 140
121 677 4BUB-4B460A-2/4K2MS-4Z1600A 7355226408 S308441 140
76 782 4BB-4B630A-4K3MS-4VK4MS 7348426118 912147 186 S308474
85 919 4BB-4B630A-2/4K3MS-F13 7348426119 916900
76 590 4BUB-4B630A-4K3M-4VK4MS 7348426120 912147 S308474
85 727 4BUB-4B630A-2/4K3MS-F13 7348426121 916900
The transducer can be rotated for crowded multiple spindle arrangements (DGD 15° radial toothing).
= maximum accessibility. Floating adapter not included with spindle.
2D and 3D are available to download at www.apexpowertools.com in the Customer Support section or on www.apexpowertools.eu
in the download area.
110
Fixtured Nutrunners – Transducer Control
Right Angle, Offset & Inline Spindle Tools
EMT Offset
Fixtured Spindles Series
Torque Range Bolt Size
54 - 1073 Nm M10 - M27
40 - 792 Ft. Lbs. 7/16” - 1 1/4”
EMT Offset Floating Spindles Torque Range Max
Speed Float Output
drive
size
Min center dist Weight Length
Part No. Motor
Size Model No ft. lbs Nm RPM in. mm. in mm lbs kg. in. mm
571413 3 EMT600-2-OS600-1”-APM 576 781 102 2 50.8 1” 2.44 62 45 20.4 30.38 771.6
571503 4 EMT800-2-OS800-1”-APM 792 1073 102 2 50.8 1” 2.81 71.5 90 40.8 34.56 877.8
*EMT Fixtured Offset tools may be configured to meet your requirements. Contact Apex Tool Group for your configuration.
Standard Equipment: Air LB Connector.
Optional Connectors: Contact your nearest ATG Sales & Service Center if a motor is required with a VEAM or PTR connector.
EMT Inline Floating Spindle Torque Range Max
Speed Float Output
drive
size
Min center dist Weight Length
Part No. Motor
Size Model No. ft. lbs Nm RPM in. mm. in mm lbs kg. in. mm
571404 3 EMT600-2R6-1”-APM 576 781 102 2 50.8 1” 3.56 90.5 35 15.9 24.25 616
571500 4 EMT800-2R6-1”-APM 792 1073 102 2 50.8 1” 3.75 95.3 50 22.6 28.44 722.4
571002 4 EMT1200-2R8-1”-APM 1095 1485 74 2 50.8 1” 4.69 119 60 27.2 32.91 835.9
*EMT200, EMT400 - Optional length spindle drivers available (R8,R10,R12)
*EMT600, EMT800 - Optional length spindle drivers available (R8,R10,R12,R16)
*EMT200 - Output drive size (Sq. Drive) available in 1/2”, 5/8”
*EMT400, EMT600 - Output drive size (Sq. Drive) available in 3/4”, 1”
*EMT Fixtured tools may be configured to meet your requirements.
Contact Apex Tool Group for your configuration.
Standard Equipment: Air LB Connector
Optional Connectors: Contact your nearest ATG Sales & Service
Center if a motor is required with a VEAM or PTR connector.
EMT Inline Fixtured
Spindles Series
Torque Range Bolt Size
54 - 1485 Nm M10 - M30
40 - 1095 Ft. Lbs. 7/16” - 1 3/8”
111
Cleco Angle
Floating Spindle Torque Range Max.
Speed Float Output
Drive
Size
Minimum
Center
to Center
Weight* Length
Model Number ft. lbs. Nm RPM in. mm in. mm lbs. kg in. mm
18EAE16S131 3.7-12.5 5.1-17 1225 .98 25 3/8 1.10 28 4.4 2.0 16.0 406
18EAE23S131 5.3-17.7 7.2-24 860 .98 25 3/8 1.10 28 4.4 2.0 16.0 406
18EAE30S131 4.4-22.8 6.0-31 655 .98 25 3/8 1.10 28 4.4 2.0 16.0 406
48EAE37S231 5.9-28.0 8.0-38 1225 .74 19 3/8 1.33 34 5.2 2.4 18.6 474
48EAE52S231 8.1-39.8 11-54 860 .74 19 3/8 1.33 34 5.2 2.4 18.6 474
48EAE53S341 8.1-39.8 11-54 850 .74 19 1/2 1.73 44 5.9 2.7 20.0 509
48EAE74S341 11.0-56.8 15-77 600 .74 19 1/2 1.73 44 5.9 2.7 20.0 509
48EAE95S341 14.7-72.2 20-98 460 .74 19 1/2 1.73 44 5.9 2.7 20.0 509
48EAE110S341 16.9-81.1 23-110 400 .74 19 1/2 1.73 44 7.2 3.3 20.5 521
48EAE135S461 20.6-101.7 28-138 270 .74 19 3/4 2.12 54 8.8 4.0 20.5 522
48EAE230S461 34.6-172.5 47-234 150 .74 19 3/4 2.12 54 10.3 4.7 22.1 563
67EA150S461 22.1-110.6 30-150 210 .74 19 3/4 2.04 52 13.0 5.9 25.7 655
67EA185S461 27.3-136.3 37-185 170 .74 19 3/4 2.04 52 13.0 5.9 25.7 655
67EA210S461 31.0-154.8 42-210 155 .74 19 3/4 2.04 52 13.0 5.9 25.7 655
67EA235S461 33.9-169.6 46-230 135 .74 19 3/4 2.04 52 13.0 5.9 25.7 655
67EA255S461 40.6-188.1 55-255 115 .74 19 3/4 2.04 52 13.0 5.9 25.7 655
*Weights are without tool cable and mounting plate.
Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco
Global Controller.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: 18/48 series tools; Air-LB Connector; Mounting plate.
Tools with Matrix connector available upon request.
67 series tools; Matrix Connector; Mounting plate
Extra Equipment: 18/48 tools; Std. tool cable 301866-XX, RA swivel cable
301903-XX, Inline swivel cable 301904-XX, Extension cable 301877-XX.
67 tools; Std. tool cable 542778-XX, RA swivel cable 544055-XX,
Inline swivel cable 544056-XX, Extension cable 542779-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Fixtured Nutrunners – Transducer Control
Inline & Right Angle Spindle Tools
Right 18EAE, 48EAE & 67EA
Angle Fixtured Spindle
Torque Range Bolt Size
5.1 - 255 Nm M7 - M18
3.7 - 188.1 Ft. Lbs. 1/4” - 3/4”
Cleco Inline
Floating Spindle Torque Range Max.
Speed Float Output
Drive
Size
Minimum
Center to Center Weight* Length
Model Number ft. lbs. Nm RPM in. mm in. mm lbs. kg in. mm
18ESE06ZA 1.5-4.4 2-6 4000 .98 25 1/4 1.81 46 3.0 1.4 15.5 394
18ESE12ZA 2.2-8.9 3-12 1820 .98 25 1/4 1.81 46 3.2 1.5 16.0 406
18ESE17ZA 3.0-12.5 4-17 1290 .98 25 1/4 1.81 46 3.2 1.5 16.0 406
48ESE12ZA 2.2-8.9 3-12 4000 .98 25 1/4 1.81 46 3.4 1.5 16.7 425
48ESE271ZB 4.4-19.9 6-27 1820 1.97 50 3/8 1.81 46 5.8 2.6 22.0 559
48ESE361ZB 5.9-28.0 8-38 1290 1.97 50 3/8 1.81 46 5.8 2.6 22.0 559
48ESE602ZB 8.8-42.0 12-57 855 1.97 50 1/2 2.20 56 8.4 3.8 24.4 620
48ESE702ZB 10.3-50.2 14-68 570 1.97 50 1/2 2.20 56 8.4 3.8 24.4 620
48ESE802ZB 12.5-60.5 17-82 450 1.97 50 1/2 2.44 62 9.6 4.4 26.7 678
48ESE1152ZB 18.4-84.8 25-115 320 1.97 50 1/2 2.44 62 9.6 4.4 26.7 678
48ESE1502ZB 22.1-110.6 30-150 245 1.97 50 1/2 2.44 62 9.6 4.4 26.7 678
48ESE1653ZB 24.3-121.7 33-165 220 1.97 50 3/4 3.15 80 14.6 6.6 28.6 726
48ESE2503ZB 36.1-182.1 49-247 145 1.97 50 3/4 3.15 80 14.6 6.6 28.6 726
67ES65BZ4 10-47 13-64 535 .69 17.6 1/2 1.31 33 10.8 4.9 21.0 533
67ES105BZ4 15-77 21-104 330 .69 17.6 1/2 1.31 33 10.8 4.9 21.0 533
67ES135BZ4 20-100 27-135 245 .69 17.6 1/2 1.31 33 10.8 4.9 21.0 533
67ES190Z6 28-140 38-190 165 .75 19 3/4 1.31 33 15.6 7.1 22.0 559
67ES285Z6 42-210 57-285 115 .75 19 3/4 1.31 33 15.6 7.1 22.0 559
67ES385Z6 57-285 77-386 83 .75 19 3/4 1.31 33 15.6 7.1 22.0 559
67ES475Z6 70-350 95-475 67 .75 19 3/4 1.31 33 16.0 7.3 22.4 569
67ES610Z6 90-450 122-610 50 .75 19 3/4 1.31 33 16.0 7.3 22.4 569
67ES850Z8 125-625 170-848 33 1.0 25 1 1.50 38 20.0 9.1 23.8 605
67ES1050Z8 155-775 210-1050 27 1.0 25 1 1.50 38 20.0 9.1 23.8 605
67ES1670Z8 246-1230 334-1668 17 1.0 25 1 1.50 38 20.0 9.1 23.8 605
67ES2060Z8 304-1520 412-2060 14 1.0 25 1 1.50 38 20.0 9.1 23.8 605
*Weights are without tool cable and mounting plate.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: 18/48 series tools; Air-LB Connector; Mounting plate.
Tools with Matrix connector available upon request.
67 tools; Matrix Connector; Mounting plate
Extra Equipment: 18/48 tools; Std. tool cable 301866-XX, RA swivel cable
301903-XX, Inline swivel cable 301904-XX, Extension cable 301877-XX.
67 tools; Std. tool cable 542778-XX, RA swivel cable 544055-XX,
Inline swivel cable 544056-XX, Extension cable 542779-XX.
Additional Accessories: See pages 121-129 for additional accessories.
18ESE, 48ESE &
67ES Inline
Fixtured Spindle Series
Torque Range Bolt Size
2 - 2060 Nm M5 - M36
1.5 - 1520 Ft. Lbs. #10 - 1 1/2”
112
Fixtured Electric Nutrunners
Accessories
Accessory Cables
Part No. Accessory Cable Descrtption
543446-7 Ethernet Cable Crossover - 2M
543445-7 Ethernet Cable Patch - 2M
544196-005 System Bus Cable - 0.5M
544196-020 System Bus Cable - 2M
544196-050 System Bus Cable - 5M
544196-200 System Bus Cable - 20M
544196-500 System Bus Cable - 50M
544197 System Bus Terminator
935170 Serial Cable IrDA - 1M
543490-10 Serial Cable Null Modem - 3M
Cable Length Type C Type B Type A1 Type A2
Cable for Second
Transducer 1
Cable for Second
Transducer 2
2m 960432-020 960431-020 960430-020 960433-020 960960-020 1 960961-020 2
4m 960432-040 960431-040 960430-040 960433-040 960960-040 1 960961-040 2
6m 960432-060 960431-060 960430-060 960433-060 960960-060 1 960961-060 2
10 m 960432-100 960431-100 960430-100 960433-100 960960-100 1 960961-100 2
20 m 960432-200 960431-200 960430-200 960433-200 960960-200 1 960961-200 2
30 m 960432-300 960431-300 960430-300 960433-300 960960-300 1 960961-300 2
40 m 960432-400 960431-400 960430-400 960433-400 960960-400 1 960961-400 2
50 m 960432-500 960431-500 960430-500 960433-500 960960-500 1 960961-500 2
PE cable for fastener plate 960408-xxx. Available in any length, preferred in 2 m grid
The order number extension indicates the length of the cable in decimetres.
1960960-XXX must be used parallel to cable type B and C.
2960961-XXX must be used parallel to cable type A1 and A2
Push-Pull connector
Connectors
S961062 shield terminals are
required for each TMx channel
Field Cable Highflex quality
960432-XXX, L = 4-20 m
Cable Field quality
960431-XXX, L = 6-50 m
Extension cable High-Flex
quality 960430-XXX, L = 2-20 m
OR
Extension cable Super-High-Flex
quality 960433-XXX, L= 2-20 m
Connection & Extension Cables For Conventional Spindles
Field Quality
■ For fixed cables, e.g. in stationary machine components
HighFlex Quality
■ For movable cables with demanding requirements
SuperHighFlex Quality
■ For movable cables and extreme requirements,
e.g. robot applications
Type C
■ Extremely flexible, direct connection between the nutsetter and
nutsetter control unit in HighFlex quality
Type B
■ Fixed cable in field quality from intermediate connection point
to the nutsetter control unit
Type A1
■ Extremely flexible connection in HighFlex quality between
nutsetter and intermediate connection point
Type A2
■ Alternative to 960430-xxx for robot applications; extra-flexible
connection between nutsetter and intermediate connection
point in SuperHighFlex quality
113
Fixtured Electric Nutrunners
Accessories
X
Flange
Fastener
Plate
Floating
Adapter
X
Fastener Flange
Plate
Floating
Adapter
Flange
Housing
X
Fastener Flange
Plate
Floating
Adapter
Flange
Housing
Model No. Motor
Size
Maximum Torque X Output
Drive
Size
Drive
ft. lbs. Nm in. mm
922325PT 1 44.25 60 7.08 180 3/8 1ZB 1VK
910609 2 118.00 160 7.08 180 1/2 2ZB 2VK
935552 2 147.51 200 7.08 180 3/4 2ZB 2VK
910613 3 383.63 520 7.28 185 3/4 3ZB 3VK
912106 4 383.63 520 7.48 190 3/4 4VK
912147 4 553.17 750 7.32 186 1 4VK
S976956 4 553.17 750 5.31 140 1 4ZA
S308441 4 1180.09 1600 5.31 140 1 1/2 4ZA
916642 4 464.66 630 7.28 185 1 4ZA
916643 4 383.63 520 7.48 190 3/4 4ZA
DGD Floating Adapter
Model No. Motor
Size
Maximum Torque X Output
Drive
Size
Drive
ft. lbs. Nm in. mm
S308434 1 44.25 60 6.61 168 3/8 1ZB
S308435 2 118.00 160 6.77 172 1/2 2ZB
S308450 2 147.51 200 6.77 172 3/4 2ZB
S308436 3 383.63 520 6.92 176 3/4 3ZB
S308437 1 44.25 60 6.61 168 3/4 1VK
S308438 2 81.13 110 6.55 166.5 1 2VK
S308475 2 147.51 200 6.55 166.5 1 2VK
S308439 3 221.26 300 6.73 171 1 1/2 3VK
S308440 4 383.63 520 6.88 175 3/4 4VK
S308474 4 486.79 660 6.73 171 1 4VK
DGD Floating Adapter Including Flange Housing
Model No. Motor
Size
Maximum Torque X Output
Drive
ft. lbs. Nm in. mm Size
929041 1 44.25 60 2.95 75 3/8
929053 2 125.38 170 3.54 90 1/2
929061 2 147.51 200 4.52 115 3/4
929065 3 221.26 300 4.13 105 3/4
929077 4 383.63 520 4.52 115 3/4
929089 4 486.79 660 4.52 115 1
DGD Floating Adapter Including Flange Housing
for Right Angle Drive
DIA.
.50
2.47
16.63 FOR EMT80-2P, -3P, -4P AND -6P
5.20
3/8 AVAILABLE
1/2 SQ. DRIVE STANDARD
2.53 DIA
2.65
1.65
2.38
3.13
2.06
1.3125
.375
1.031
(4) Places
4.38
Torque Reaction Bracket
#201012 (Standard)
Torque Reaction Bracket
#201039 (Optional)
2.25
1.00
0.625
0.625
.50
.38
Guide Dia.
2.375/2.373
3/4” NPT
.38 Dia. (4) Holes 5/16 Slot
2.46
1.69
EMT80-10P-3/8-29P
EMT80-6P-1/2-29P
EMT80-4P-1/2-29P
570409 EMT80-3P-1/2-29P
570401
570408
570407
PART NO. MODEL EMT80-P FIXTURED
RIGHT ANGLE NUTRUNNERS
WITH 29-PIN CONNECTOR
-P ANGLE HEAD CAPACITY: 60 FTLBS
NOTE:TOOL OUTPUT EXCEEDS ANGLE Mounting Brackets for EMT Series Tools
3.248
3.250
.38
Slots for 3/8 Screws
4-Places
Torque Reaction Bracket
#201034 (Standard)
Torque Reaction Bracket
#201510 (Optional)
1/2", 5/8', & 3/4 SQUARE DRIVE AVAILABLE
21.00 FOR EMT200-2V, -3V, -4V AND -5V
3.69
1.67
.63
25/64 Dia. Thru
Dia.
3.12
4.19
1.640
1.000
1.500
2.73
3.25 DIA
4.84
3.897
1.949
3.38
.63 1.125
2.250
2.19
DIA.
EMT 80 Series EMT 200 & 400 Series
114
Cleco mPro400GC Global Controller
Master, Primary & Secondary
mPro400GC
Global Controller
■ Graphics interface
■ Fully programmable
■ Local storage of 10,000 cycles
■ LAN capable
■ Fieldbus options available
mPro400GC-SG
Global Controller
The mPro400GC-SG controller provides the same
capabilities and functions as the mPro400GC-M
controller with the added convenience of
panel mount installation.
Weight Width Height Depth
Model Descrtption Tool Compatibility lbs. kg in. mm in. mm in. mm
MPRO400GC-P Primary Cleco 18-48 Series, LiveWire,
Intelligent Spindle* 30.7 13.9 10.3 261.62 14.9 378.46 12.9 327.66
MPRO400GC-S Secondary Cleco 18-48 Series 28.1 12.7 10.3 261.62 14.9 378.46 12.9 327.66
MPRO400GC-M Master LiveWire, Intelligent Spindle* 23.3 10.6 10.3 261.62 14.9 378.46 12.9 327.66
MPRO400GC-SG Panel Mount LiveWire, Intelligent Spindle, 1,2,3,4
*Requires quote to accommodate hardware configurations.
Note: 17/47/67 and Matrix versions of the 18/48 series tools require Isolation Transformer 544185PT for use with Primary/Secondary controllers.
Panel Mount can be used in different cabinet solutions.
Master/Primary Unit Secondary Unit
MPRO400GC-M
MPRO400GC-P MPRO400GC-S
115
Cleco mPro400GC-E & -I Global Controllers
Torque Control & Current Control
Weight Width Height Depth
Model Descrtption Tool Compatibility lbs. kg in. mm in. mm in. mm
MPRO400GC-E Torque Control Cleco 18-48 E_E Series* 32.8 14.8 10.3 261.62 14.9 378.46 12.9 327.66
MPRO400GC-I Current Control Cleco 18-48 C_E Series** 32.8 14.8 10.3 261.62 14.9 378.46 12.9 327.66
*Note: 17/47/67 and Matrix versions of the 18/48 series tools require Isolation Transformer 544185PT for use with GC-E model.
**Note: 48 series tools require 230 VAC.
Standard Equipment: TM-COM Remote Programming Software, Null Modem Serial Cable, and crossover Ethernet cable.
Torque Control
mPro400GC-E
& mPro400GC-I
Global Controllers
■ Single channel
■ Economical
■ Remote programming
■ Local storage of
5,000 cycles
■ LAN capable
■ Input Voltage: 115/230VAC
■ Connections:
1x Serial
1x TM-COM
1x Ethernet
■ Inputs/Outputs:
8x 24V Inputs,
8x 24V Outputs
MPRO400GC-E & MPRO400GC-I
Isolation
Transformer
544185PT
Incoming
Power
115/230VAC
Matrix Tool
Cable
542778-XM
Cleco 67 Series Tool
Air-Lb Cable
Power
Cable
All 67 Series Tools require an isolation
transformer (544185PT) for use with Cleco
Global Controller.
116
DGD mPro400SG Global Controllers
DGD Spindle Controllers
mPro400SG
Global Controllers
■ Graphics interface
■ Fully programmable
■ Local storage of 10,000 cycles
■ LAN capable
■ Fieldbus options available
The mPro400SG can be substituted for
a remotely mounted mPro400GC-M.
For use with conventional spindles only.
Width Height Depth
Model Order No. Tool Compatibility in. mm in. mm in. mm
MPRO400SG S112849-SG DGD Spindles, size 1 & 2, 1.2/01-channel 18.9 480.0 14.2 360.0 11.0 280.0
MPRO400SG S112850-SG DGD Spindles, size 1 & 2, 1.2/02-channel 30.0 763.0 14.9 380.0 13.8 350.0
MPRO400SG S112870-SG Cleco EMT & DGD Spindles, size 3 & 4, 3/4 01-channel 30.0 763.0 14.9 380.0 13.8 350.0
MPRO400SG S112871-SG Cleco EMT & DGD Spindles, size 3 & 4, 3/4 01-channel 30.0 763.0 14.9 380.0 13.8 350.0
S112849-SG – DGD size 1 & 2 spindles
S112850-SG – DGD size 1 & 2 spindles
S112870-SG – DGD size 3 & 4 spindles
The Mid-Six controller
is a wall mounted
design capable of
handling up to six
conventional spindles.
It is shown with the
optional surface mount
mPRO400 controller.
Contact the factory for
a quotation.
117
DGD mPro400SG Global Controllers
DGD Spindle Controller Cabinets
mPro400SG Global
Controller Cabinets
The size of the cabinet depends on the
number and size of the DGD spindles.
Control cabinet for spindle sizes 1 & 2,
1-32 channels.
For use with conventional spindles only.
Width Height Depth
Order No. Descrtption in. mm in. mm in. mm
S112860-01-SG 1 Channel 23.6 600 78.7 2000 19.6 500
S112860-02-SG 2 Channel 23.6 600 78.7 2000 19.6 500
S112860-03-SG 3 Channel 23.6 600 78.7 2000 19.6 500
S112860-04-SG 4 Channel 23.6 600 78.7 2000 19.6 500
S112860-05-SG 5 Channel 23.6 600 78.7 2000 19.6 500
S112860-06-SG 6 Channel 23.6 600 78.7 2000 19.6 500
S112860-07-SG 7 Channel 23.6 600 78.7 2000 19.6 500
S112860-08-SG 8 Channel 23.6 600 78.7 2000 19.6 500
S112860-09-SG 9 Channel 47.2 1200 78.7 2000 19.6 500
S112860-10-SG 10 Channel 47.2 1200 78.7 2000 19.6 500
S112860-11-SG 11 Channel 47.2 1200 78.7 2000 19.6 500
S112860-12-SG 12 Channel 47.2 1200 78.7 2000 19.6 500
S112860-13-SG 13 Channel 47.2 1200 78.7 2000 19.6 500
S112860-14-SG 14 Channel 47.2 1200 78.7 2000 19.6 500
S112860-15-SG 15 Channel 47.2 1200 78.7 2000 19.6 500
S112860-16-SG 16 Channel 47.2 1200 78.7
