Wheelnut Fastening
Automated Systems is the recognized leader in the
design and manufacture of multiple spindle wheelnut
assembly systems. We are known across the
globe for excellence of innovative engineering
design, support, and quality award winning service.
Decades of expertise in the design and manufacturing
of multiple spindle fixtured and portable
assembly systems have identified Automated
Systems as an experienced, innovative supplier
capable of creating custom solutions matched to
unique customer assembly requirements.
Automated Systems makes use of standard system
building block components which are used
to blend a custom system from a complete line of
DC electric spindles, fastening controllers and an
extensive listing of twenty-four different fastening
strategies which not only include the usual Torque
Control, Angle Control and Yield, but also includes
the unusual Pulse Torque Recovery makeup
torque fastening strategy awarded US Patent
number 5,094,301.
Medium Duty Wheelnut Tool
For Passenger Vehicles requiring
Medium Torque, High Volume
? 100 Nm to 500 Nm
Automated Systems supplies custom Wheelnut
multiple designs using standard major components
with proven track records for reliability,
lifetime performance, millions of cycles capability
and ergonomic solutions which support operator
safety, comfort and efficiency.
Heavy Duty Wheelnut Tool
For Trucks requiring High Torque,
Low Volume
? 700 Nm to 1200 Nm
Automated Systems Wheelnut multiples use highefficiency
electric motors manufactured specifically
for this application. Available motor torques range
from 700 Nm to 1200 Nm. Motor spindles can be
mounted and arranged to match any bolt circle
pattern, using standard in-line motors with or
without offset gearing.
Automated Systems
Wheelnut Fastening
23
Automated Systems
Wheelnut Fastening
Adjustable Wheel Stud Centers
When several similar wheels need to be assembled
and the economics of separate powerheads
dictates a single powerhead, Automated Systems
has the answer! Adjustable stud centers. The position
of the studs can be controlled by an operator
manual switch, or auto detection.
Budd Double Wheels
When it comes to fastening inner and outer wheel
lug nuts including Budd style stud/nut adapters,
a wheelnut powerhead requires long retractable
spindles which are designed to prevent side
loading. Automated Systems has the know-how,
and the products to supply wheelnut multiples for
double wheel truck applications. Our wheel equipment
is more rugged than the trucks it assembles.
Suspension
System
A properly designed
suspension system can
not only support the
tool and return it to a
home position, it can
also provide a zero gravity
lift and hold. The total
weight of the tool
is controlled by the
operator with very little
pressure required to
move the tool up or
down.
Local Operator Display
(Operator Interface)
Each powerhead
displays a red, green,
and yellow LED on a
per spindle basis. The
LED display indicates
the status of the last
tightening as NOK,
OK and Low Torque or
Angle. An optional local operator interface display
can be used to display output, and accept touch
screen switch inputs.
Some of the uses of a local operator display include:
? Application selection
? Tool home position jog
? Overall fastening status in green or red
? Part graphics
? Fastening values for torque and angle
? Functional push-button inputs & display outputs
24
Push-off and Return
On moving transfer lines, the overhead suspension system
can be mounted to an overhead track, supporting the
multiple. At the conclusion of the fastening rundown by all
spindles, the suspension pushes the tool away from the
wheel and returns the tool to the home position ready for
the next wheel. The vehicle on the assembly transfer line
continues to move while the lug nuts are being tightened.
Application Detection of
Aluminum and Steel Wheels
Wheel lug nut tools are distinguished from standard horizontally
aligned systems by their cylindrical shape. Rotation
of the tool is required for proper alignment with the wheel
lugs, and the ability to provide a clear line of sight for the
operator. In addition, a 6 spindle tool can be rotated 30
degrees, rundown a second time and tighten the alternate
6 lug nuts on a 12 lug nut wheel. This alternative design is
tightening dual truck wheels, and can automatically determine
if the wheel is aluminum or steel and change the
fastening parameters automatically.
Automated Systems
Wheelnut Fastening
Shown are two
manually operated
vertical multiples and
one semi-automatic
DC electric systems.
25
Automated Systems
Intelligent Spindle Field Cables
Shown above is a ten Intelligent spindle application with nine jumper cables and a single
field cable that terminates at the power distribution box.
Shown above is a seven Intelligent spindle application with six jumper cables and a single field cable that terminates at
the power distribution box.
Reduced Field Cables
DGD Intelligent Spindles provide a
solution for the number-one cause
of shut-down … cable failure … by
substantially reducing the number
of cables needed. Where DGD
conventional spindles each need a
separate cable, up to 16 Intelligent
Spindles can be run from a single
field cable by cascading cables
between spindles. We offer both
HighFlex for fixed or flexible routing
for heavy duty requirements and
SuperHighFlex for robotic and all
high mobility applications. See
page 76 for more details.
Benefits of Intelligent
Spindle Field Cables
■ Lower cost of ownership
■ Higher durability
■ Lower start-up cost
■ Reduced cable
management systems
26
How To Build A DC Fastening System
mPro400GC-M, mPro400GC-P & mPro400GC-S
Building a DC System for Safety Critical applications
is as simple as 1, 2, 3!
1. Choose a common system to the right.
2. Select the correct components below.
3. Order your System!
Controller (Page 114)
Corded Tool (Page 32-44)
Cable (Page 121-122)
LiveWire Tool (Pages 28-31)
Access Point (Page 123) IRDA Device (Infrared Cable) (Page 123)
System Bus Cable (Page 124)
System Bus Terminator Plug (Page 124) System Bus Accessories (Page 124)
Isolation Transformer (Page 121) (Refer to Pages 46-47 to build a mPro400GC-E/GC-I system.)
27
mPro400GC-M (Master) 1 1
mPro400GC-P (Primary) 1 1 1 1 1 1
mPro400GC-S (Secondary) 1 2
18/48E_EXXX 1 1 2 1 3
67E_XXX 1
Tool Cable - 301866-XM (Air-Lb) 1 1 2 1 3
Tool Cable - 542778-XM (Matrix) 1
Extension Cable - 301877-XM (If Required) (Air-Lb)
Extension Cable - 542779-XM (If Required) (Matrix)
17/47B___BXX
(Battery or V-Max power source required. See Page 123.)
1 1 3
544249PT 1 1 1
935170 IRDA Only
935144 Pistol Holder w/IRDA
935290 Right Angle Holder w/IRDA
935999 70Nm, 90Nm, Crowfoot/Tubenut Holder w/IRDA
1 1 1
544196-005 (0.5M)
544196-020 (2M)
544196-050 (5M)
544196-200 (20M)
544196-500 (50M)
1 2 1 2 3
544197PT 1 1 1 1 1
S133420 Stack Light 3
S133410 4-Position Socket Tray 1
S133411 8-Position Socket Tray 1
S133406 Control Box 1
544185PT 1
One Corded Tool (18/48E_E)
One Corded Tool (67E_XXX) with a Control Box
One Corded Tool (18/48E_E) w/LiveWire?
Two Corded Tools (18/48E_E) with 8-Pos Socket Tray
One Corded 18/48E_E Tool w/4-Position Socket Tray
Three Corded Tools (18/48E_E)
One LiveWire? Tool only
Three LiveWire? Tools Only w/3 Stack Lights
Model/Part Number
Add or delete components
as required.
28
Electric Nutrunners – Cordless Transducer Control
Right Angle Tools
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Peripherals
S – Barcode Scanner
- – None
Motor
47
Tool Style
A – Angle
Power
B-Battery
47 B A X X B XX XXX X
Max Torque (Nm)
Under 60Nm, rounded up to
the nearest 1Nm. Over 60Nm,
rounded to the nearest 5Nm.
Battery
B – 26–48V
Output Drive
AM3 – 3/8” Sq.Dr.
AH4 – 1/2” Sq.Dr.
Retainer
– Pin Retainer
B Ball Retainer
Cordless Tools Nomenclature
Right Angle Series
Torque Range Bolt Size
5.5 - 90 Nm M5 - M12
4.1 - 77.4 Ft. Lbs. #10 - 9/16”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
47BAYSB28AM3
Right Angle Torque Range Free Speed (RPM) Weight
Less Battery Output
Drive Size
Length With 26V Battery
Model Number Ft.Lbs. Nm 26V* 44V* Vmax lbs. kg in. mm
47BAYSB15AM3 4.1-11.1 5.5-15 538 983 983 4.77 2.17 3/8" SQ 21.79 553.5
47BAYSB21AM3 5.9-15.5 8-21 411 751 751 4.77 2.17 3/8" SQ 21.79 553.5
47BAYSB28AM3 7.4-20.7 10-28 291 532 532 4.77 2.17 3/8" SQ 22.32 567.5
47BAYSB35AM3 9.6-25.8 12-35 244 447 447 5.35 2.43 3/8" SQ 23.06 600.0
47BAYSB50AM3 13.3-36.9 18-50 168 293 293 5.39 2.45 3/8" SQ 23.94 608.0
47BAYSB70AH4 17.7-66.3 24-70 123 216 216 8.54 3.88 1/2" SQ 26.7 678.0
47BAYSB90AH4** 29.5-77.4 40-90 82 144 144 8.73 3.96 1/2" SQ 26.7 678.0
*Speed with fully charged battery.
**Non-released model available for specific applications only.
Contact Regional Application Center for implementation assistance.
General: All tools must be used with a Cleco approved line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
(Apex u-Guard socket shown above not included)
29
Electric Nutrunners – Cordless Transducer Control
Pistol Grip Tools
17BPYSB13Q
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Peripherals
S – Barcode Scanner
- – None
Motor
17
Tool Style
P – Pistol
Power
B-Battery
17 B P X X B XX Q
Max Torque (Nm)
Under 60Nm, rounded up to
the nearest 1Nm.
Battery
B – 26–48V
Output Drive
Q – Quick change
Cordless Tools Nomenclature
Pistol Grip Series
Torque Range Bolt Size
3.0 - 13 Nm M5 - M6
2.2 - 9.6 Ft. Lbs. #10 - 1/4”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
Pistol Torque Range Free Speed (RPM) Weight
Less Battery Output
Drive Size
Length With 26V Battery
Model Number Ft.Lbs. Nm 26V* 44V* Vmax lbs. kg in. mm
17BPYSB05Q 2.2-3.7 3-5 1639 2428 2428 3.34 1.52 1/4" Hex 8.44 214.5
17BPYSB07Q 2.2-5.2 3-7 1161 1721 1721 3.34 1.52 1/4" Hex 8.44 214.5
17BPYSB09Q 2.2-6.6 3-9 887 1314 1314 3.34 1.52 1/4" Hex 8.44 214.5
17BPYSB13Q 2.2-9.6 3-13 629 931 931 3.34 1.52 1/4" Hex 8.44 214.5
*Speed with fully charged battery.
General: All tools must be used with a approved Cleco line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
(Apex u-Guard socket
shown above not included)
30
Electric Nutrunners – Cordless Transducer Control
Tube Nut Tools
“B”
T2, T3 & T4
Head Height
“A”
2.63” (67 mm) 1.56” (40 mm)
T2 Head T3 Head
1.44” (37 mm)
“A” “C”
“D”
T4 Head
1.94” (49 mm)
“A”
“C”
“D”
“C”
“D”
T3
T4
Tube Nut Series
Torque Range Bolt Size
10 - 40 Nm M6 - M8
7.4 - 29.5 Ft. Lbs. 1/4” - 7/16”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
47BTYSB20T2
The 47BT tube nut wrench alternates the
direction of rotation each time the lever is
actuated. When rotating in reverse, the
socket will stop at the open position.
Tube Nut Torque Range Free
Speed (RPM)
Weight
Less Battery
Max.
Drive
Size
Length w/
26V Battery
Head
A Width B Blade Ht. C Opening D End/Cntr.
Model Number Ft.Lbs. Nm 26V* 44V* Vmax lbs. kg in. mm in. mm in. mm in. mm in. mm
47BTYSB20T2 7.4-14.8 10-20 260 455 455 5.6 2.54 1/2" 23.6 598 1.42 36 0.55 14 0.28 7 0.53 13
47BTYSB30T3 11.1-22.1 15-30 188 329 329 5.6 2.53 3/4" 23.3 588 1.65 42 0.59 15 0.475 12 0.73 19
47BTYSB40T4 14.8-29.5 20-40 141 247 247 6.4 2.90 1 1/16" 29.9 612 2.36 60 0.59 15 0.675 17 0.93 24
*Speed with fully charged battery.
General: All tools must be used with a Cleco approved line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
To order individual sockets, use a “KS” prefix. (i.e. KS2EA01 for a T2, 1/4”, flush, thru hex socket.)
Tube Nut Tool Nomenclature Socket Nomenclature
Peripherals
S – Barcode Scanner
- – None
Battery
B-26V-48V
Series
47
Tool Style
T – Tube Nut
Power
B–Battery
Output Type
0 -Partial Thru Hex 2 -Double Thru Hex
1 -Thru Hex 3 -Partial Thru
Double Hex
Extension Length
0 – Flush 4 – 1/2”
2 – 1/4” 6 – 3/4”
Maximum Hex Socket Size
MG, EE T2 Head Type
MM T3 Head Type
MU T4 Head Type
00, ## (Specials) All Head Types
Socket Sizes
EA - 1/4” M5 – 5mm MH – 14mm MP – 22mm
EC – 3/8 M6 – 6mm MI – 15mm MQ – 23mm
EE – 1/2 MA – 7mm MJ – 16mm (5/8”) MR – 24mm (15/16”)
EF – 9/16 MB – 8mm (5/16) MK – 17mm MS – 25mm
EH – 11/16 MD – 10mm ML – 18mm MT – 26mm
EJ – 13/16 ME – 11mm (7/16) MM – 19mm (3/4”) MU – 27mm (1 1/16”)
EK – 7/8 MF – 12mm MN – 20mm
EM – 1 MG – 13mm MO – 21mm
47 B T X X x XX XX KSX XX XX X
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Head Type
T2 - 20 Nm
T3 - 30 Nm
T4 - 40 Nm
Thru Hex Double
Thru Hex
Partial
Thru Hex
Partial Thru
Double Hex
Head Type
KS2 – T2
KS3 – T3
KS4 – T4
Max Torque (Nm)
Under 60Nm, rounded up
to the nearest 1Nm. Over
60Nm, rounded to the
nearest 5Nm.
31
Electric Nutrunners – Cordless Transducer Control
Crowfoot Tools
.61”
(15.49)
.97”
(24.63)
.75”
(19)
3.00”
(76.2)
30°
R.63”
(16)
1.25”
(31.75)
1.50”
(38.1)
.25”
(6.35)
C3 – 30° Head (Part No. 301960)
Maximum Recommended Torque: 22 ft.lbs. (30 Nm)
15°
.61”
(15.49)
1.09”
(27.86)
.75”
(19)
3.00”
(76.2)
2.66”
(67.56)
1.50”
(38.1)
1.25”
(31.75)
R.63”
(16)
.25”
(6.35)
C1 – 15° Head (Part No. 301959)
Maximum Recommended Torque: 22 ft.lbs. (30 Nm)
Crowfoot Series
Torque Range Bolt Size
10.5 - 30 Nm M6 - M8
7.7 - 22.1 Ft. Lbs. 1/4” - 7/16”
■ Brushless precision
■ Resolver control
■ Transducer accuracy
■ On-board controller with
power management
■ Integrated servo with I/O
signal handling
47BCYSB30C1
Crowfoot Torque Range Free Speed
(RPM) Weight Less Battery Max.
Drive
Size
Length w/26V Battery
Model Number ft. lbs. Nm 26V* 44V* Vmax lbs. kg in. mm
47BCYSB30C1 7.7-22.1 10.5-30 186 326 326 6.12 2.78 1/2” 26.26 667
47BCYSB30C3 7.7-22.1 10.5-30 186 326 326 6.12 2.78 3/4” 25.98 660
*Speed with fully charged battery.
General: All tools must be used with a Cleco approved line controller.
Standard Equipment: Integrated infrared communications.
Extra Equipment: See pages 123-125 for optional accessories.
To order individual sockets, use a “CS” prefix before the required socket. (i.e. CSEE01 for a 1/2”, flush, thru hex socket.)
Socket Type
CS – Crowfoot
Data Transmission
X – 2.4 GHz WLAN: WEP, WPA, WPA2, 802.1x
Y – Dual Band – 2.4/5 GHz WLAN: WEP, WPA, WPA2, 802.1x
Z – Xbee (4 tools/base station)
R – RF868MHz (4 tools/base station) EU only
Peripherals
– - None
S - Barcode
scanner
Series
47
Tool Style
C – Crowfoot
Battery Output Type
1 – Thru Hex
Extension Length
0 – Flush 4 – 1/2” 6 – 3/4”
Socket Size
EA - 1/4” MA – 7mm MF – 12mm
EC – 3/8 MB – 8mm (5/16) MG – 13mm
EE – 1/2 MC – 9mm MH – 14mm
EF – 9/16 MD – 10mm MI – 15mm*
ME – 11mm (7/16) *Fragile. Light duty apps.
Crowfoot Tool Nomenclature Socket Nomenclature
47 B C X X B XX XX CS XX X X
Head Type
C1 - 15°
C3 - 30°
Battery
B – 26V-48V
Max Torque (Nm)
Under 60Nm, rounded up
to the nearest 1Nm. Over
60Nm, rounded to the
nearest 5Nm.
32
Right Angle Torque Range Max.
Speed Weight* Output
Drive
Size
Length
Anglehead
Side to Center Height
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm in. mm
18EAE08AL2 1.5-5.9 2-8 3000 2.9 1.3 1/4” 13.6 345 0.51 13 1.4 36
18EAE15AM3 3.0-11.1 4-15 1300 3.3 1.5 3/8” 14.8 376 0.59 15 1.6 41
18EAE22AM3 3.7-16.2 5-22 920 3.3 1.5 3/8” 14.8 376 0.59 15 1.6 41
18EAE28AM3 4.4-20.7 6-28 700 3.3 1.5 3/8” 14.8 376 0.59 15 1.6 41
48EAE15AL3 2.2-11.1 3-15 2855 3.8 1.7 3/8” 15.7 398 0.59 15 1.6 41
48EAE28AL3 4.4-20.7 6-28 1300 4.1 1.9 3/8” 16.2 410 0.59 15 1.6 41
48EAE41AM3 6.6-30.2 9-41 1090 4.3 2.0 3/8” 17.3 440 0.75 19 1.9 48
48EAE58AM3 8.9-42.8 12-58 770 4.3 2.0 3/8” 17.3 440 0.75 19 1.9 48
48EAE58AM4 8.9-42.8 12-58 770 4.3 2.0 1/2” 17.3 440 0.75 19 1.9 48
48EAE90AH4 13.3-64.2 18-87 515 6.6 3.0 1/2” 18.5 470 0.81 21 2.3 58
48EAE105AH4 15.5-76.7 21-104 340 6.6 3.0 1/2” 18.5 470 0.81 21 2.3 58
48EAE135MH4 19.9-98.1 27-133 265 7.3 3.3 1/2” 19.1 485 0.94 24 2.4 61
48EAE175AX6 26.6-129.8 36-176 190 10.2 4.6 3/4” 21.6 549 1.06 27 2.7 69
48EAE230AX6 33.9-169.6 46-230 145 10.2 4.6 3/4” 21.6 549 1.06 27 2.7 69
*Weights are without tool cable and reaction bar.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector. Ball retainer optional.
Tools with Matrix connector available upon request
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Right Angle Series
Torque Range Bolt Size
2 - 230 Nm M5 - M16
1.5 - 169.6 Ft. Lbs. #10 - 5/8”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
18EAE28AM3
48EAE58AM3
Electric Nutrunners – Corded Transducer Control
Right Angle Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
18, 48
Tool Style
A – Right Angle
Power
E-Electric
XX E A E XXX XXX X
Output Drive
AL2 – 1/4” Sq.Dr. AM4 – 1/2” Sq.Dr.
AL3 – 3/8” Sq.Dr. AH4 – 1/2” Sq.Dr.
AM3 – 3/8” Sq.Dr. MH4 – 1/2” Sq.Dr.
AX6 – 3/4” Sq.Dr.
Retainer
- Pin retainer
B Ball retainer
Connector
Air-LB
33
Right Angle Torque Range Max.
Speed Weight* Output
Drive
Size
Length
Anglehead
Side to Center Height
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm in. mm
67EA235AL6 33.9-169.6 46-230 135 12.9 5.9 3/4” 25.8 655 1.03 26 2.3 58
67EA255AL6 40.6-188.1 55-255 115 12.9 5.9 3/4” 25.8 655 1.03 26 2.3 58
67EA310ML6 44-229 60-310 100 20.2 9.2 3/4” 29.1 739 1.06 27 2.55 65
67EA340AM6 51.6-247.1 70-335 90 21.0 9.5 3/4” 31.6 803 1.38 35 3.1 79
67EA460AM6 70.1-339.3 95-460 66 21.0 9.5 3/4” 31.6 803 1.38 35 3.1 79
67EA570AM6? 84.8-420.4 115-570 53 21.0 9.5 3/4” 31.6 803 1.38 35 3.1 79
67EA860AH8 129.1-634.3 175-860 33 22.7 10.3 1” 25.3 643 1.50 38 9.32 237
67EA1035AH8 154.9-763.3 210-1035 25 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
67EA1340AH8 199.1-988.3 270-1340 20 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
67EA1700AH8 250.8-1253.8 340-1700 16 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
67EA2010AH8 295.0-1475.0 400-2000 13 23.0 10.5 1” 26.3 668 1.50 38 9.32 237
*Weights are without tool cable and reaction bar.
Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco
Global Controller.
?Note: Contact regional application ceneter for implementation assistance.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Matrix Connector.
Extra Equipment: Std. tool cable 542778-XX, RA swivel cable 544055-XX,
Inline swivel cable 544056-XX, Extension cable 542779-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Right Angle Series
Torque Range Bolt Size
46 - 2000 Nm M18 - M36
34 - 1475 Ft. Lbs. 3/4” - 1 1/2”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
67EA235AL6
Electric Nutrunners – Corded Transducer Control
Right Angle Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
67
Tool Style
A – Right Angle
Power
E-Electric
XX E A XXXX XXX X
Output Drive
AL6 – 3/4” Sq.Dr.
AM6 – 3/4” Sq.Dr.
ML6 – 3/4” Sq.Dr.
AH8 – 1” Sq.Dr.
Retainer
- Pin retainer
B Ball retainer
Isolation
Transformer
544185PT
Incoming
Power
115/230VAC
Matrix Tool
Cable
542778-XM
Cleco 67 Series Tool
Air-Lb Cable
Power
Cable
All 67 Series Tools require an isolation
transformer (544185PT) for use with Cleco
Global Controller.
34
Inline Non-Floating Series
Torque Range Bolt Size
2 - 150 Nm M5 - M14
1.5 - 110 Ft. Lbs. #10 - 5/8”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
48ESE25D3
18ESE06Q
Inline Non-Floating Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
18ESE06Q 1.5-4.4 2-6 4000 2.5 1.1 1/4” Hex 12.3 312 0.91 23
18ESE06D2 1.5-4.4 2-6 4000 2.5 1.1 1/4” 11.8 300 0.91 23
18ESE12Q 2.2-8.9 3-12 1820 2.7 1.2 1/4” Hex 13.0 330 0.91 23
18ESE12D3 2.2-8.9 3-12 1820 2.7 1.2 3/8” 12.4 315 0.91 23
18ESE17Q 3.0-12.5 4-17 1290 2.7 1.2 1/4” Hex 13.0 330 0.91 23
18ESE17D3 3.0-12.5 4-17 1290 2.7 1.2 3/8” 12.4 315 0.91 23
18ESE22D3 3.7-16.2 5-22 985 2.7 1.2 3/8” 12.4 315 0.91 23
18ESE31D3 5.2-22.9 7-31 695 2.7 1.2 3/8” 12.4 315 0.91 23
48ESE12Q 2.2-8.9 3-12 4000 3.0 1.4 1/4” Hex 13.5 343 0.91 23
48ESE12D2 2.2-8.9 3-12 4000 3.0 1.4 1/4” 13.0 330 0.91 23
48ESE25D3 4.4-18.4 6-25 1820 3.2 1.5 3/8” 13.6 345 0.91 23
48ESE36D3 5.9-26.6 8-36 1290 3.2 1.5 3/8” 13.6 345 0.91 23
48ESE48D3 7.4-35.4 10-48 985 3.3 1.5 3/8” 13.8 351 0.91 23
48ESE65D4 9.6-47.9 13-65 750 5.3 2.4 1/2” 16.6 420 1.13 29
48ESE90D4 14.0-66.4 19-90 510 5.6 2.5 1/2” 17.1 435 1.13 29
48ESE125D4 19.2-92.2 26-125 360 5.6 2.5 1/2” 17.1 435 1.13 29
48ESE150D4 22.9-110.6 31-150 240 5.6 2.5 1/2” 17.1 435 1.13 29
*Weights are without tool cable.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector; Dead Handle is included with 18ES12Q and
18ES12D3. Ball retainer optional.
Tools with Matrix connector available upon request.
Reaction bar is included with inline tools with output torques of 17-150 NM.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Mounting Plates: 543231 - (all with exception of listed below)
543235 - 18ESE06Q/D2, 48ESE12Q/D2
49087108 - 48ESE65D4, 48ESE90D4, 48ESE125D4, & 48ESE150D4.
See page 127 for mounting plate dimensions.
Additional Accessories: See pages 121-129 for additional accessories.
Electric Nutrunners – Corded Transducer Control
Inline Non-Floating Spindle Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
18, 48
Tool Style
S – Inline
Power
E-Electric
XX E S E XXX XX X
Output Drive
Q – Quick change D3 – 3/8” Sq.Dr.
D2 – 1/4” Sq.Dr. D4 – 1/2” Sq.Dr.
Retainer
- Pin retainer
B Ball retainer
Connector
Air-LB
35
Isolation
Transformer
544185PT
Incoming
Power
115/230VAC
Matrix Tool
Cable
542778-XM
Cleco 67 Series Tool
Air-Lb Cable
Power
Cable
All 67 Series Tools require an isolation
transformer (544185PT) for use with Cleco
Global Controller.
Inline Non-Floating Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
67ES65D4 10-47 13-64 535 10.3 4.7 1/2” 21.0 533 1.31 33
67ES105D4 15-77 21-104 330 10.3 4.7 1/2” 21.0 533 1.31 33
67ES135D4 20-100 27-135 245 10.3 4.7 1/2” 21.0 533 1.31 33
67ES190D6 28-140 38-190 165 11.6 5.3 3/4” 20.5 521 1.31 33
67ES285D6 42-210 57-285 115 11.6 5.3 3/4” 20.5 521 1.31 33
67ES385D6 57-285 77-386 83 11.6 5.3 3/4” 20.5 521 1.31 33
67ES475D6 70-350 95-475 67 12.0 5.4 3/4” 20.9 531 1.31 33
67ES610D6 90-450 122-610 50 12.0 5.4 3/4” 20.9 531 1.31 33
67ES850D8 125-625 170-848 33 17.0 7.7 1” 23.8 605 1.50 38
67ES1050D8 155-775 210-1050 27 17.0 7.7 1” 23.8 605 1.50 38
67ES1670D8 246-1230 334-1668 17 17.0 7.7 1” 23.8 605 1.50 38
67ES2060D8 304-1520 412-2060 14 17.0 7.7 1” 23.8 605 1.50 38
67ES4050D12 597-2985 810-4050 6 45.2 20.5 1 1/2” 24.5 622 2.35 60
*Weights are without tool cable or reaction bar if so equipped.
Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco
Global Controller.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Matrix Connector; Reaction bar; Slave drive reaction bar
on 67ES4050D12.
Extra Equipment: Std. tool cable 542778-XX, RA swivel cable 544055-XX,
Inline swivel cable 544056-XX, Extension cable 542779-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Inline Non-Floating Series
Torque Range Bolt Size
13 - 4050 Nm M10 - M42
10 - 2985 Ft. Lbs. 7/16” - 1 3/4”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
67ES135D4
Electric Nutrunners – Corded Transducer Control
Inline Non-Floating Spindle Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Output Drive
D4 – 1/2” Sq.Dr. D8 – 1” Sq.Dr.
D6 – 3/4” Sq.Dr. D12 – 1 1/2” Sq.Dr.
Motor
67
Tool Style
S – Inline
Power
E-Electric
XX E S XXXX XXX X
Retainer
- Pin retainer
B Ball retainer
36
Pistol Grip Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
18EPE06Q 1.5-4.4 2-6 4000 2.2 1.0 1/4” Hex 7.0 178 0.84 21
18EPE06D2 1.5-4.4 2-6 4000 2.2 1.0 1/4” 6.5 165 0.84 21
18EPE12Q 2.2-8.9 3-12 1820 2.4 1.1 1/4” Hex 7.7 196 0.84 21
18EPE12D3 2.2-8.9 3-12 1820 2.4 1.1 3/8” 7.2 183 0.84 21
18EPE17Q 3.0-12.5 4-17 1290 2.4 1.1 1/4” Hex 7.7 196 0.84 21
18EPE17D3 3.0-12.5 4-17 1290 2.4 1.1 3/8” 7.2 183 0.84 21
18EPE22D3 3.7-16.2 5-22 985 2.4 1.1 3/8” 7.2 183 0.84 21
18EPE31D3 5.2-22.9 7-31 695 2.4 1.1 3/8” 7.2 183 0.84 21
48EPE12Q 2.2-8.9 3-12 4000 2.7 1.2 1/4” Hex 8.2 208 0.84 21
48EPE12D2 2.2-8.9 3-12 4000 2.7 1.2 1/4” 7.7 196 0.84 21
48EPE25D3 3.7-18.4 5-25 1820 2.9 1.3 3/8” 8.4 213 0.84 21
48EPE36D3 5.9-26.6 8-36 1290 2.9 1.3 3/8” 8.4 213 0.84 21
48EPE48D3 7.4-35.4 10-48 985 3.0 1.4 3/8” 8.6 218 0.84 21
48EPE65D4 9.6-47.9 13-65 750 5.0 2.3 1/2” 11.4 290 1.1 28
48EPE90D4 14.0-66.4 19-90 510 5.3 2.4 1/2” 12.0 305 1.1 28
48EPE125D4 19.2-92.2 26-125 360 5.3 2.4 1/2” 12.0 305 1.1 28
48EPE150D4 22.9-110.6 31-150 240 5.3 2.4 1/2” 12.0 305 0.9 23
48EPE200D6 (swing bar) 92-144 125-195 180 9.5 4.3 3/4” 16.2 410 1.13 29
48EPE500D6 (swing bar) 225-368 300-500 53 9.8 4.5 3/4” 16.2 410 1.13 29
48EPE1000D8 (swing bar) 370-740 500-1000 33 16.2 7.3 1” 19.16 486 1.5 38
*Weights are without tool cable or suspension bail.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector; Suspension Bail; Dead Handle is included with
18EPE12Q & 18EPE12D3. Reaction bar is included with pistol tools with output torques of
17-1000 Nm. Ball retainer optional.
Tools with Matrix connector available upon request.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Pistol Grip Series
Torque Range Bolt Size
2 - 1000 Nm M5 - M22
1.5 - 740 Ft. Lbs. #10 - 1”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
18EPE12Q
48EPE25D3
Electric Nutrunners – Corded Transducer Control
Pistol Grip Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
18, 48
Tool Style
P – Pistol
Power
E-Electric
XX E P E XXX XX X
Output Drive
Q – Quick change D3 – 3/8” Sq.Dr.
D2 – 1/4” Sq.Dr. D4 – 1/2” Sq.Dr.
D6 – 3/4” Sq.Dr. D8 – 1” Sq.Dr.
Retainer
- Pin retainer
B Ball retainer
Connector
Air-LB
37
Push-to-Start Series
Torque Range Bolt Size
2 - 12 Nm M5 - M6
1.5 - 8.9 Ft. Lbs. #10 - 1/4”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
Push-to-Start Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
18EPE06QP 1.5-4.4 2-6 4000 2.66 1.19 1/4” Hex 9.35 238 0.84 21
18EPE06D3P 1.5-4.4 2-6 4000 2.66 1.19 3/8” 8.8 224 0.84 21
18EPE12QP 2.2-8.9 3-12 1820 2.83 1.27 1/4” Hex 9.35 196 0.84 21
18EPE12D3P 2.2-8.9 3-12 1820 2.83 1.27 3/8” 8.8 224 0.84 21
18ESE06QP 1.5-4.4 2-6 4000 2.93 1.31 1/4” Hex 14.75 375 0.91 23
18ESE06D3P 1.5-4.4 2-6 4000 2.93 1.31 3/8” 14.20 360 0.91 23
18ESE12QP 2.2-8.9 3-12 1820 3.10 1.40 1/4” Hex 14.75 375 0.91 23
18ESE12D3P 2.2-8.9 3-12 1820 3.10 1.40 3/8” 14.20 360 0.91 23
*Weights are without tool cable or suspension bail.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector; Suspension Bail (pistol only); Dead Handle (301857)
is included with 18CPE12Q & 18CPE12D3.
Tools with Matrix connector available upon request.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
18EPE06QP
18ESE06QP
Electric Nutrunners – Corded Transducer Control
Push-to-Start Pistol Grip/Inline Tools
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Motor
18, 48
Tool Style
P – Pistol
S – Inline
Power
E-Electric
XX E P E XX XX P
Output Drive
Q – Quick change
D3 – 3/8” Sq.Dr.
Connector Push-to-Start
Air-LB
38
Inline Floating Spindle
Series
Torque Range Bolt Size
2 - 248 Nm M5 - M16
1.5 - 182.9 Ft. Lbs. #10 - 5/8”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
Inline
Floating Spindle Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
18ESE06ZA 1.5-4.4 2-6 4000 3.0 1.4 1/4 15.5 394 0.91 23
18ESE12ZA 2.2-8.9 3-12 1820 3.2 1.5 1/4 16.0 406 0.91 23
18ESE17ZA 3.0-12.5 4-17 1290 3.2 1.5 1/4 16.0 406 0.91 23
48ESE12ZA 2.2-8.9 3-12 4000 3.4 1.5 1/4 16.7 425 0.91 23
48ESE271ZB 5.9-19.9 8-27 1820 5.8 2.6 3/8 22.0 559 0.92 23
48ESE361ZB 5.2-26.6 7-36 1290 5.8 2.6 3/8 22.0 559 0.92 23
48ESE602ZB 8.1-42.0 11-57 855 8.4 3.8 1/2 24.4 620 1.10 28
48ESE702ZB 10.3-50.2 14-68 570 8.4 3.8 1/2 24.4 620 1.10 28
48ESE802ZB 12.5-60.5 17-82 450 9.6 4.4 1/2 26.7 678 1.10 31
48ESE1152ZB 18.4-84.8 25-115 320 9.6 4.4 1/2 26.7 678 1.10 31
48ESE1502ZB 22.9-110.6 31-150 245 9.6 4.4 1/2 26.7 678 1.10 31
48ESE1653ZB 24.3-121.7 33-165 220 14.6 6.6 3/4 28.6 726 1.57 40
48ESE2503ZB 36.8-182.9 50-248 145 14.6 6.6 3/4 28.6 726 1.57 40
*Weights are without tool cable or reaction bar if so equipped.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector. Tool square drives have thru hole output.
Tools with Matrix connector available upon request.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
48ESE12ZA
1 22”
58 87mm
2 318”
1 159”
29 43mm
669”
16 99mm
1 339”
34 01mm
3 15”
80 01mm
31 1mm
ZA 1ZB 2ZB 3ZB
Dimensional Spindle Float: 1” (25mm) ZA
2” (50mm) 1ZB, 2ZB, 3ZB
tolerances = ± 004” (0 1mm)
0 25”
6 3mm
1 22”
31 1mm 1 31”
33 3mm
1 73”
44 0mm
0 35”
9 0mm
1 37”
34 9mm
1 41”
35 92mm
1 41”
35 92mm
2 00”
50 8mm
1 97”
50 04mm
1 559”
39 6mm
1 50”
38 1mm
1 10”
27 94mm
M5 x 0 8
Thd Typ
Base Plate Mounting Dimensions
Electric Nutrunners – Corded Transducer Control
Inline Floating Spindle Tools
Output Drive
ZA – 1/4” Sq.Dr.
1ZB – 3/8” Sq.Dr.
2ZB – 1/2” Sq.Dr.
3ZB – 3/4” Sq.Dr.
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Motor
18, 48
Tool Style
S – Inline
Power
E-Electric
XX E S E XXX XXX
Connector
Air-LB
39
67ES2060Z8
Inline
Floating Spindle Torque Range Max.
Speed Weight* Output
Drive
Size
Length Side to Center
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm
67ES65BZ4 10-47 13-64 535 10.8 4.9 1/2 21.0 533 1.31 33
67ES105BZ4 15-77 21-104 330 10.8 4.9 1/2 21.0 533 1.31 33
67ES135BZ4 20-100 27-135 245 10.8 4.9 1/2 21.0 533 1.31 33
67ES190Z6 28-140 38-190 165 15.6 7.1 3/4 22.0 559 1.31 33
67ES285Z6 42-210 57-285 115 15.6 7.1 3/4 22.0 559 1.31 33
67ES385Z6 57-285 77-386 83 15.6 7.1 3/4 22.0 559 1.31 33
67ES475Z6 70-350 95-475 67 16.0 7.3 3/4 22.4 569 1.31 33
67ES610Z6 90-450 122-610 50 16.0 7.3 3/4 22.4 569 1.31 33
67ES850Z8 125-625 170-848 33 20.0 9.1 1 23.8 605 1.50 38
67ES1050Z8 155-775 210-1050 27 20.0 9.1 1 23.8 605 1.50 38
67ES1670Z8 246-1230 334-1668 17 20.0 9.1 1 23.8 605 1.50 38
67ES2060Z8 304-1520 412-2060 14 20.0 9.1 1 23.8 605 1.50 38
*Weights are without tool cable or reaction bar if so equipped.
Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco
Global Controller.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Matrix Connector; 67ES series – Mounting plate.
Extra Equipment: Std. tool cable 542778-XX, RA swivel cable 544055-XX,
Inline swivel cable 544056-XX, Extension cable 542779-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Inline Floating Spindle
Series
Torque Range Bolt Size
13 - 2060 Nm M6 - M36
10 - 1520 Ft. Lbs. 1/4” - 1 1/2”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
67ES Base Plate Mounting Dimensions
Spindle Float: .69” (17mm)
2.372”
2.375”
PILOT DIA.
1.185”
.281” DIA.
THRU
2 HOLES
1.685”
1.563”
Z4
2.005”
3.010”
1.505”
3/8-24
UNF
TH'D DIA.
3.750”
2.500”
2.499”
PILOT DIA.
Z6
Spindle Float: .75” (19mm)
4.000”
4.020”
7/16-20
UNF-2B
TH’D DIA.
5.000”
4.000”
2.000”
2.010”
3.000”
3.010”
2.991”
2.990”
PILOT DIA.
Z8
Spindle Float:
1.0” (25mm)
Electric Nutrunners – Corded Transducer Control
Inline Floating Spindle Tools
Motor
67
Tool Style
S – Inline
Electric
67 E S XXXX XX
Output Drive
Z4 – 1/2” Sq.Dr.
Z6 – 3/4” Sq.Dr.
Z8 – 1” Sq.Dr.
Max Output Torque (Nm)
Under 60 Nm, rounded up to the nearest 1 Nm.
Over 60 Nm, rounded to the nearest 5 Nm.
Isolation
Transformer
544185PT
Incoming
Power
115/230VAC
Matrix Tool
Cable
542778-XM
Cleco 67 Series Tool
Air-Lb Cable
Power
Cable
All 67 Series Tools require an isolation
transformer (544185PT) for use with Cleco
Global Controller.
40
Hold & Drive tool approaches
the application.
Hold socket fits over bolt and
prevents it from rotating.
Tool is pushed down and started until drive
socket engages and tightens nut.
Hold & Drive Torque Range Free
Speed Length Weight* Head Height Side to Center
Model Number Ft.Lbs. Nm RPM in. mm lbs. kg in. mm in. mm
48EAE53H 8.1 – 39.1 11 – 53 850 20.2 512 7.9 3.60 2.40 61 1.06 27
48EAE75H 11.1 – 54.6 15 – 74 600 20.2 512 7.9 4.03 2.40 61 1.06 27
48EAE110H 17.0 – 82.6 23 – 112 400 20.2 512 8.9 4.03 2.40 61 1.06 27
48EAE135H 20.7 – 98.8 28 – 134 270 20.6 522 8.9 4.03 2.40 61 1.06 27
48EAE230H 34.7 – 167.4 47 – 227 150 22.2 563 10.6 4.79 2.40 61 1.06 27
*Weights are without tool cable and reaction bar.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector. Retraction 1” standard for hold bit.
Tools with Matrix connector available upon request.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Hold & Drive Series
Torque Range
11 - 227 Nm
8.1 - 167.4 Ft. Lbs.
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence 48EAE115H
Electric Nutrunners – Corded Transducer Control
Hold & Drive Tools
48 E A E XXX H H X XX X XX X
Hold & Drive Tool Nomenclature Socket Nomenclature
Max Output Torque
Retainer Shaft
3 - 3 1/2”
4 - 4”
5 - 5 3/8”
6 - 5 7/8”
9 - 9 1/2”
Head Type
H-Hold & Drive
Connector
Air-LB
Motor
48
Tool
Style
A – Angle
Electric
Drive Socket Sizes (surface drive)
EH – 11/16 MG – 13mm MM – 19mm (3/4”) MS – 25mm
EJ – 13/16 MH – 14mm MN – 20mm MT – 26mm
EK – 7/8 MI – 15mm MO – 21mm MU – 27mm (1 1/16”)
EM – 1 MJ – 16mm (5/8”) MP – 22mm MX – 30mm (1 3/16”)
EO – 1 1/8 MK – 17mm MQ – 23mm MZ – 32mm (1 1/4”)
ML – 18mm MR – 24mm (15/16”)
Hold
& Drive
Oval Dim. (length)
If socket style =0
(female oval)
Socket Style
F – Female Hex
M – Male Hex
T – Torx
O – Female Oval Hold Socket (width across flats)
EA – 1/4 ME – 11mm (7/16”)
EC – 3/8 MF – 12mm
M5 – 5mm 15 – T15
M6 – 6mm 20 – T20
MA – 7mm 25 – T25
MB – 8mm (5/16”) 30 – T30
MC – 9mm 40 – T40
MD – 10mm 45 – T45
50 – T50
Male Oval
(length)
Hold Size (width)
Output Drive Size
“Hold & Drive” bolts are
used with these tools in automotive
and truck frame applications. They
reduce assembly handling to one
person working from one side of the
workpiece. The bolt is held stationary
by the tool while the nut is tightened
from the same side.
Note: To order a tool include the Socket Nomenclature with the Tool Nomenclature.
Order just the Socket Nomenclature for a complete head assembly.
Refer to Parts List for individual socket part numbers.
41
Flush Socket Series
Torque Range Bolt Size
4.9 - 230 Nm M8 - M21
3.6 - 169.6 Ft. Lbs. 1/2” - 1 3/16”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
18EAE30F1
Flush socket tools have plenty of clearance to fit low clearance
applications. Electric flush socket tools tighten with much higher
accuracy than tools with crowfoot attachment.
Overall Head Height
Available clearance
Electric Nutrunners – Corded Transducer Control
Flush Socket Tools
Flush
Socket Head
Type
Torque Range Free
Speed Weight* Length
Anglehead
Side to Center Height
Model Number ft. lbs. Nm RPM lbs. kg in. mm in. mm in. mm
18EAE16F1 F1 3.6-11.8 4.9-16 1225 4.4 2.00 16.0 406 0.55 14 1.54 39
18EAE23F1 F1 3.4-17.0 4.6-23 860 4.4 2.00 16.0 406 0.55 14 1.54 39
18EAE30F1 F1 4.4-22.1 6.0-30 655 4.4 2.00 16.0 406 0.55 14 1.54 39
48EAE37F2 F2 5.9-27.3 8.0-37 1225 5.4 2.43 18.7 474 0.67 17 1.69 43
48EAE52F2 F2 8.1-38.3 11-52 860 5.4 2.43 18.7 474 0.67 17 1.69 43
48EAE53F3 F3 8.1-39.0 11-53 850 6.0 2.74 20.0 509 0.87 22 2.32 59
48EAE75F3 F3 11.1-55.3 15-75 600 6.0 2.74 20.0 509 0.87 22 2.32 59
48EAE110F3 F3 17.0-81.1 23-110 400 7.4 3.38 20.5 521 0.87 22 2.32 59
48EAE135F4 F4 19.9-99.5 27-135 270 8.9 4.03 20.6 522 1.06 27 2.40 61
48EAE230F4 F4 34.7-169.6 47-230 150 10.6 4.79 22.2 563 1.06 27 2.40 61
*Weights are without tool cable or reaction bar if so equipped.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector.
Tools with Matrix connector available upon request.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
X Dimension For Flush Socket
Head in. mm Socket Size Range
F1 1.54 39 8–15mm
F2 1.69 43 10–15mm
F3 2.32 59 13–21mm
F4 2.4 61 17–21mm
FX XX X X
Head Type
F1 Head 8–15mm socket capacity
F2 Head 10–15mm socket capacity
F3 Head 13–21mm socket capacity
F4 Head 13–21mm socket capacity
Motor
18
48 Tool Style
A – Right Angle
Electric Connector
Air-LB
Output Type
0–Standard 1–Fast Lead 2–Magnetic
Extension Length
0 – Flush 4 – 1/2” 8 – 1”
2 – 1/4” 6 – 3/4”
Flush Socket Tool Nomenclature Socket Nomenclature
XX E A E XXX FX
Socket Size
EC – 3/8 MB – 8mm (5/16) MJ – 16mm (5/8”)
EE – 1/2 MD – 10mm MK – 17mm
EF – 9/16 ME – 11mm (7/16) ML – 18mm
EH – 11/16 MF – 12mm MM – 19mm (3/4”)
EJ – 13/16 MG – 13mm MN – 20mm
MH – 14mm MO – 21mm
MI – 15mm
Max Output Torque
F1 16,23, 30 Nm F3 53, 75, 110 Nm
F2 37, 52 Nm F4 135, 230 Nm
<60 Nm, rounded up to the nearest 1 Nm. >60 Nm,
rounded to the nearest 5 Nm.
Flush
Socket
1 F1
2 F2
3 F3
4 F4
Note: To order a tool include the Socket Nomenclature with the Tool Nomenclature.
Order just the Socket Nomenclature for a complete head assembly.
Refer to Parts List for individual socket part numbers.
42
T2
T3
T4
“B”
T2, T3 & T4
Head Height
“A”
2.63” (67 mm) 1.56” (40 mm)
T2 Head T3 Head
1.44” (37 mm)
“A” “C”
“D”
T4 Head
1.94” (49 mm)
“A”
“C”
“D”
“C”
“D”
Tube Nut Max.
Drive
Size
Torque Range Free
Speed Weight* Length
Head
A Width B Blade Ht. C Opening D End/Cntr.
Model Number Ft.Lbs. Nm RPM lbs. kg in. mm in. mm in. mm in. mm in. mm
48ETE20T2 1/2” 7.4-14.8 10-20 1425 4.4 2.0 16.9 430 1.42 36 0.55 14 0.28 7 0.53 13
48ETE30T3 3/4” 11.1-22.1 15-30 1030 4.5 2.0 16.6 422 1.65 42 0.59 15 0.475 13 0.73 19
48ETE40T4 1 1/16” 14.8-29.5 20-40 770 5.3 2.3 17.9 454 2.36 60 0.59 15 0.675 18 0.93 24
*Weights are without tool cable and reaction bar.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector.
Tools with Matrix connector available upon request.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Tube Nut Series
Torque Range Bolt Size
10 - 40 Nm M6 - M10
7.4 - 29.5 Ft. Lbs. 1/4” - 3/8”
■ Brushless precision
■ Resolver control
■ Transducer control
■ Memory intelligence
The 48ET tube nut wrench alternates the
direction of rotation each time the lever is
actuated. When rotating in reverse, the socket
will stop at the open position.
Note: To order a tool include the Socket Nomenclature with the Tool Nomenclature.
Order T2XXXX for a complete head assembly (i.e. T2MF02)
To order individual sockets, use a “KS” prefix (i.e. KS2EA01 for a T2 1/4”, Flush, Thru Hex socket.)
Electric Nutrunners – Corded Transducer Control
Tube Nut Tools
Tube Nut Tool Nomenclature Socket Nomenclature
Max Output Torque
<60 Nm, rounded up to the nearest 1 Nm.
Head Type
T2 - 20 Nm
T3 - 30 Nm
T4 - 40 Nm
Motor
48
Connector
Air-LB
Tool Style
T – Tube Nut
Electric Output Type
0 -Partial Thru Hex 2 -Double Thru Hex
1 -Thru Hex 3 -Partial Thru
Double Hex
Extension Length
0 – Flush 4 – 1/2” 8 – 1”
2 – 1/4” 6 – 3/4”
Maximum Hex Socket Size
MG, EE T2 Head Type
MM, 3/4” T3 Head Type
MU, 1 1/16” T4 Head Type
00, ## (Specials) All Head Types
Thru Hex Double
Thru Hex
Partial
Thru Hex
Partial Thru
Double Hex
Head Type
KS2 – T2
KS3 – T3
KS4 – T4
XX E T E XX XX KSX XX XX X
Socket Sizes
EA - 1/4” M5 – 5mm MH – 14mm MP – 22mm
EC – 3/8 M6 – 6mm MI – 15mm MQ – 23mm
EE – 1/2 MA – 7mm MJ – 16mm (5/8) MR – 24mm (15/16)
EF – 9/16 MB – 8mm (5/16) MK – 17mm MS – 25mm
EH – 11/16 MD – 10mm ML – 18mm MT – 26mm
EJ – 13/16 ME – 11mm (7/16) MM – 19mm (3/4) MU – 27mm (1 1/16)
EK – 7/8 MF – 12mm MN – 20mm
EM – 1 MG – 13mm MO – 21mm
43
48ECE30C 1
Crowfoot Torque Range Free
Speed Weight* Length
Model Number
15° Head 30° Head ft. lbs. Nm RPM lbs. kg in. mm
48ECE30C1 48ECE30C3 5.2-22.1 10.5-30 860 5.5 2.3 20.5 521
*Weights are without tool cable and reaction bar.
General: All tools must be used with an approved ATG cable and controller.
Standard Equipment: Air-LB Connector.
Tools with Matrix connector available upon request.
Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,
Inline swivel cable 301904-XX, Extension cable 301877-XX.
Additional Accessories: See pages 121-129 for additional accessories.
Crowfoot Series
Torque Range Bolt Size
7 - 30 Nm M6 - M8
5 - 22 Ft. Lbs. #10 - 3/8”
■ Brushless precision
■ Resolver control
■ Transducer control
