The performance of high molecular weight polyethylene bar:
UHMWPE is the molecular weight of more than 400 million engineering thermoplastics.Has excellent wear resistance, good low temperature impact resistance, self-lubricating, non-toxic, water resistance, chemical resistance, heat resistance than normal PE, the outer surface hardness, rigidity
UHMWPE rod is generally translucent white appearance, the length of one meter, two meters in length can be customized, UPE rod diameter from 480 mm-300MM-200MM-100MM-80MM-50MM to 10 mm, other colors can be customized
The main characteristics of UHMWPE Rod UHMWPE ︰ average molecular weight of about 350 million to 800 million, due to high molecular weight plastic incomparable with other excellent impact resistance, abrasion resistance, self lubrication, chemical resistance and other properties.Moreover, UHMWPE low temperature performance, at -40 ℃ still has a high impact strength, even at -269 ℃ for use.Abrasion resistance, chemical resistance, low coefficient of friction, flame-retardant anti-static, impact strength, ultra-low temperature performance, long-term performance and environmentally friendly non-toxic odorless and so have some requirement, the high is its first choice.
   Our development and production of wear-resistant ultra high molecular weight bar, impact strength, absorb shock impact, flame retardant, antistatic, self-lubricating, chemically resistant, shielding of atomic radiation, low temperature (-256 ℃), non-toxic, non-pollution characteristics, and has machining performance.
   High molecular weight polyethylene Bangcaiyongtu widely used food machinery Lingjian blank, antiseptic equipment Deng Ling Jian
 Excellent physical and mechanical properties of UHMWPE makes it widely used in machinery, food machinery, textile machinery, paper, mining, agriculture, chemical industry and sports equipment and other fields
UHMWPE rod density 0.936 ~ 0.964g/cm3, non-toxic, water is not easy, not easy to adhere, no surface attraction; mechanical properties and unique chemical properties, which focused almost entirely on the merits of various plastics, together with the ordinaryethylene and other engineering plastics unmatched wear resistance, self lubrication and noise attenuation; impact resistance, low temperature, low temperature impact resistance; high temperature creep, good thermal stability, melting temperature of 190 ~ 210 ℃, heatdeformation temperature of 85 ℃ (under the 0.46MPa), melt flow rate close to zero; cold is good, brittle at temperatures below 140 ℃; resistance to the tensile strength of up to 39.2MPa; corrosion resistance and good resistance to environmental cracking.

 
Wear and corrosion resistance of UHMWPE Rod
Even at low temperatures, high impact strength superior chemical resistance than thermoplastic low density (<1g/cm3) low water absorption, low coefficient of friction moderate mechanical strength, rigidity and resistance to creep excellent electrical insulation propertiesand anti-static (only for the original class material) excellent machining performance good anti-high-energy radiation (gamma-and X-ray)
UPE has excellent wear rod and corrosion resistance, even at temperatures below -200 ℃, still has excellent impact strength.The main use areas: general mechanical components of food, and packaging machinery, wear parts, chemical and electroplating industries, refrigeration equipment, textile industry
Ultra-high molecular weight polyethylene (UHMW-PE) is a molecular weight higher than 450 million linear polyethylene, as a new engineering plastics, set in a variety of excellent performance:
1. Wear the highest ranks of plastic, Teflon higher than nylon 66 and 4 times, 6 times higher than carbon steel;
2. Impact strength plastic in the first column, 2 times for the PC, ABS 5 times, and can at liquid nitrogen temperature (-196 ℃) under
Maintain a high toughness;
3. Self lubricating PTFE rather with the friction coefficient was only 0.07-0.11;
4. Impact energy absorption value in the highest value for all plastics, silencer works well;
5.UHMWPE bar very high chemical stability, in a certain range of temperature and concentration ability of various corrosive media and organic agents.
6. Anti-adhesion is very strong, second only to PTFE;
7.UHMWPE health bar completely non-toxic, can be in contact with food and medicine, as food-grade plastic
High Molecular Weight Polyethylene UHMWPE bar
UHMWPE is a new engineering plastics, has many unique physical, mechanical and chemical properties, wear resistance than any other plastic, inert and has good physical impact resistance.Its biggest advantage is light weight, low energy consumption, good heat resistance, excellent electrical insulation properties, resistance to cracking and high resistance to repeated fatigue.In particular, impact resistance, wear resistance, chemical resistance, low friction coefficient, overall performance impact energy absorbing plastic to the highest values ??known.
The emergence of ultra high molecular weight polyethylene plastic domestic and foreign experts have been generally considered the top ten scientific and technological achievements of the twentieth century

 
Ultra High Molecular Weight Polyethylene UHMWPE and characteristics of the performance
Ultra-high molecular weight polyethylene (UHMWPE) referred to as ultra-high, usually refers to the viscosity average molecular weight greater than 1,700,000 to 7,000,000 of the polyethylene, high molecular weight polyethylene with relatively normal, with the molecular weight increased, especially after more than 1.7 million, but also shows its special superior mechanical properties, especially abrasion resistance, impact resistance, low coefficient of friction, chemical resistance, impact energy absorption of the comprehensive performance and the general concern by domestic and foreign experts and application.In recent years, power plants, steel mills, mines, docks and other industries to gradually promote the use of the application to obtain a good result, in the context of a larger alternative to traditional stainless steel, high manganese steel, cast iron, bronze, nylon and other materials,has broad prospects for development.直徑110毫米UHMWPE耐磨損塑料棒，外徑110毫米UPE棒，外圓110毫米高分子量聚乙烯棒，超高分子棒直徑110毫米，耐磨UPE棒直徑110毫米-100毫米

超高分子聚乙烯板可做各種機械的零部件，包括食品機械的齒輪、蝸輪、蝸桿、軸承?；ぶ凶霰谩㈤y門

高分子量聚乙烯棒材的用途

耐磨材料，食品機械，

廠商直銷直徑50mm高分子聚乙烯棒料有圖片，照片 有現貨，一般產品規格有直徑60mm-70mm-80mm-90mm-100mm長度在一米左右，買高分子聚乙烯棒到生產企業，加工企業，生產廠家-無錫精工尼龍棒廠是一家專業生產高分子聚乙烯棒材的生產企業。產品規格齊全，價格合理，材料品質高，質量好，是用百分之百高分子聚乙烯原料加工，不加任何添加劑，不加任何輔助材料，經高溫擠出成型，高分子聚乙烯棒材產品特性：高耐磨，自潤滑性能高，是塑料棒材中最耐磨損的塑料棒材，中文名高分子量聚乙烯棒材，英文為UHMWPE棒，高分子量聚乙烯棒材，廠商直銷外徑直徑50毫米高分子量聚乙烯棒，分子量在500萬以上的是高分子棒，超級耐磨Uhmwpe棒，有良好的耐低溫性能，自潤滑性能，無毒為食品級塑料棒，Upe棒材的分子量為500萬，

如何識別高分子量聚乙烯棒，

1.從外表上看表面光滑，有滑度，細膩，有彈性，有光澤，有亮度，同時界面與外表一樣，

2.高強度，UHMWPE棒強度比較高，

3，UHMWPE棒車加工時的絲條，不易斷裂，

超高分子量聚乙烯棒直徑50毫米長度1米現貨供應商，銷售商，UPE棒料單價，UPE棒產品規格、型號，價格，條款UHMWPE棒生產企業，加工廠，廠商，生產商，UHMWPE棒工廠，銷售公司，高分子量聚乙烯棒料生產廠家，加工企業，加工商，百分之百保證材質純超高分子量聚乙烯棒
高分子棒，高分子PE棒，高分子UPE棒，高分子RCH1000棒，高分子UHMWPE棒，高分子聚乙烯PE棒，高分子PE500棒，高分子PE100棒，PEHD1000高分子棒      保證分子量500萬以上的高分子棒，  外圓60mmUHMWPE棒一支重量3公斤一支單價144元（長度為1000毫米）外圓60毫米UPE棒一支重量3公斤一支單價144元，高分子聚乙烯棒外徑單位為毫米，如直徑50，60，70毫米UPE棒，長度用米來計算，外圓60毫米U-PE塑料棒一支重量3公斤一支單價144元，白色UPE塑料棒，UHMWPE塑料棒，高分子聚乙烯塑料棒，超高分子聚乙烯塑料棒，高分子量塑料棒，    外圓60mm高分子量聚乙烯UHMWPE棒一支重量3公斤一支單價144元含稅價，直徑60mmUHMW-PE棒一支重量3公斤一支單價144元，高分子PE棒直徑60毫米現貨供應商，

高分子棒銷售公司，工廠直銷UHMWPE棒，UPE棒，廠家直供高分子聚乙烯棒，規格，型號，價目，價格，外徑，外圓，直徑，圓形UHMWPE棒，實心棒，棍，UHMWPE棍，棒子，高分子量聚乙烯棒材參數，圖片照片 UHMWPE棒彩色圖片，高分子聚乙，UHMWPE棒料原產地，高分子PE棒提供樣品 最小訂貨量 高分子聚乙烯棒交貨期現貨供應商 供貨能力 銷售UHMWPE棒   質量認證UPE棒直徑50毫米長度1米現貨供應商，直徑5厘米長度1米現貨供應商，UHMWPE棒直徑50毫米長度1米現貨供應商，U-PE棒銷售商，RCH1000棒生產商，供應商，銷售商，PE-U棒材廠家，RCH1000棒直徑50mm現貨供應商，分子量800萬的高分子量聚乙烯棒現貨，PE1000棒，500萬高分子聚乙烯棒，1000萬分子量UPE棒白色PE1000棒，白色UHMWPE棒，如何識別高分子量聚乙烯棒，1.從外表上看表面光滑，有滑度，細膩，有彈性，有光澤，有亮度,目視方法:真正的超高分子量聚乙烯表面平整、均勻、光滑,發亮而且切面密度非常均勻,如果不是純正的高分子量聚乙烯棒色澤暗淡而且密度不勻，同時界面與外表一樣，2.高強度，UHMWPE棒強度比較高，3，UHMWPE棒車加工時的絲條，不易斷裂，4，比重，高分子聚乙烯棒材的比重只有0.93，高純度UHMWPE棒，純白色高分子棒，型號，規格，照片，圖片，直徑50毫米一支重量=2.公斤，一支價格96元一支，直徑50毫米UPE棒長度1米現貨，直徑50毫米UHMWPE棒材的分子量是500萬，高分子聚乙烯棒國內品牌【精工】

高分子聚乙烯U-PE棒的性能：

超高分子聚乙烯是分子量高于400萬的熱塑性工程塑料。具有極好的耐磨性，良好的耐低溫沖擊性、自潤滑性、無毒、耐水、耐化學藥品性，耐熱性優于一般PE，外表面硬度，剛性

超高分子聚乙烯棒外觀一般為半透明白色,長度一米,可以定做二米長度,UPE棒直徑從480毫米-300MM-200MM-100MM-80MM-50MM到10毫米,也可以定做其它顏色

UHMWPE棒的主要特性︰UHMWPE平均分子量約350萬～800萬，因分子量高而具有其它塑料無可比擬的優異的耐沖擊、耐磨損、自潤滑性、耐化學腐蝕等性能。而且，UHMWPE耐低溫性能優異，在-40℃時仍具有較高的沖擊強度，甚至可在-269℃下使用。 抗磨損性、抗化學腐蝕性、低摩擦系數、阻燃抗靜電、沖擊強度高、超低溫使用性能、長期使用性能和環保型無毒無異味等有一定要求的場合，超高是其首選。

我公司開發生產的超高分子量棒材耐磨損、沖擊強度高、吸收震動沖擊、阻燃、抗靜電、自潤滑、耐化學腐蝕、屏蔽原子輻射、耐低溫（-256℃）、無毒、無污染等特性，并且具有機加工性能。

超高分子量聚乙烯棒材用途廣泛，可用于食品機械零件坯料，防腐設備等零件
UHMWPE優異的物理機械性能使它廣泛應用于機械、食品機械、紡織機械、造紙、礦業、農業、化工及體育運動器械等領域

超高分子量聚乙烯棒材密度為0.936~0.964g/cm3，無毒、不易吸水、不易黏附、無表面吸引力；力學性能和化學性能獨特，它幾乎集中了各種塑料的優點，具有普通聚乙烯和其他工程塑料無可比擬的耐磨性、自潤滑性和噪聲衰減性；抗沖擊、耐低溫、抗低溫沖擊；耐高溫蠕變、熱穩定性好、熔點溫度為190~210℃，熱變形溫度為85℃ (在0.46MPa下），熔體流動速率接近零；耐寒性好，脆化溫度低于140℃;耐拉伸強度高達39.2MPa；耐腐蝕和耐環境開裂性能很好。

直徑100毫米UPE棒廠商報價.現貨價格.UPE棒生產商.供應商.銷售商.UPE棒實心棒報價.100毫米圓形UHMWPE棒的價格.圖片 照片 .UPE棒品牌.UHMWPE賽棒品牌價格.耐磨UPE棒外徑100毫米.upe棒出口加工企業.UHMWPE棒出口生產企業.高分子聚乙烯棒加工生產企業.UHMWPE棒企業介紹.產品性能介紹.企業實心棒.柱.棍.無錫UPE棒.蘇州UHMWPE棒.白色UPE棒.昆明UPE棒.昆山UHMWPE棒.高分子量聚乙烯棒.江蘇UPE棒料.上海市UPE棒.耐磨UPE棒.上海周邊地區UHMWPE棒生產商.銷售商.上海市UHMWPE棒銷售商.供應商.生產商.批發商.烏魯木齊UPE棒.UHMWPE棒.高分子聚乙烯棒.西安UPE棒.UHMWPE棒.高分子棒..昆明UPE棒.白色UPE棒.高分子量聚乙烯棒.武漢UPE棒.UHMWPE棒.耐磨損U-PE棒產品圖片
照片 超高分子量聚乙烯棒(UHMW-PE棒英文全稱是ultra-high molecular weight polyethylene
pipe)簡稱UHMWPE棒或UPE棒
是由乙烯.丁二烯單體在催化劑的作用下.聚合而成的平均分子量大于500萬的熱塑性


塑料材料的耐磨性能是靠該材料的自潤滑性能.并不是材料越硬越耐磨.自潤滑性能強.耐磨越高.高分子聚乙烯UHMWPE棒是自潤滑性能最好的塑料棒被稱為"令人驚異"的塑料棒,

uhmwpe棒料的應用領域.具體用在那些方面?.提供全面的UHMWPE的參數.型號.圖片.價格.廠家.生產企業.工廠直銷高分子量聚乙烯棒材.棒料.U-PE棒,高分子量聚乙烯棒

UHMWPE塑料棒產品，性能，圖片 照片 ，

110mmU-PE棒，江蘇無錫市U-PE棒，UPE

棒，耐磨損UHMWPE塑料棒材