- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
管內銹蝕對供水水質的影響 由于長期受到水的腐蝕作用，管內壁上生成一種含有多種成分和細菌的“生長環”，它的厚度主要受水質、【勝倉管業 高經理13730570531 QQ：2927372564】管道材料和使用時間的影響，這些銹垢上所含的多種成分和細菌，會溶于水中，使水質受到“二次污染”。還有管道 結垢 后，水質“二次污染”，使水中余氯被有機物消耗殆盡，所以細菌的總數增加，在這些細菌中有原【勝倉管業 高經理13730570531 QQ：2927372564】菌，也有對管道起腐蝕作用的細菌。這些各種各樣的細菌，有的嚴重影響水質，有的則加劇了管道腐蝕，從而縮短管道的使用壽命。硬質聚氨酯泡沫塑料是以多元羥基化合物和異氰酸酯為主要原料。在催化劑、發泡劑的作用下，經加成聚合發泡而成。主要反應力異氰酸酯與多元羥基化合物中的羥基反應生成聚氨酯。催化劑主要有叔胺和有機【勝倉管業 高經理13730570531 QQ：2927372564】錫等。發袍反應為異氰酸酯與水反應，產生二氧化碳氣體和脲。反應產物脲及叔胺等物對此反應有催化作用。反應所產生的二氧化碳氣體被用來發泡。但水發泡的*缺點是耗費昂貴的異氰酸酯。也常用低沸點氟氯烷化合物(即F-113等)，利用聚合過程中的反應熱汽化，使物料在逐步固化前形成泡沫，發泡劑用量可根據所需泡沫體密度來決定。聚【勝倉管業 高經理13730570531 QQ：2927372564】酯。硬質泡沫聚氨酯所用的聚酯，其羥值通?？刂圃?00～500之間。456聚酯指標如下。Ⅲ型阻火聚醚：是三羥基含磷含氯阻火聚醚。由于分子結構中引入了磷、氯，產品具有阻火性。Ⅲ型阻火授醚質量指標見表5—2。
In today's world, as long as there is human existence, industrial existence, life, the transportation and insulation of various pipelines will not stop, to main【勝倉管業 高經理13730570531 QQ：2927372564】tain and build every day. So no matter what kind of environment, media, application, application and pipeline insulation materials * are recognized and trusted by us?
The influence of pipe corrosion on water quality is due to the long-term corrosion of water. A growth ring containing a variety of components and bacteria is formed on the inner wall of the pipe. Its thickness is mainly affected by water quality, pipe material and service time. The various components and bacteria contained in the rust scale will dissolve in the water and make the water quality affected. "Two pollution". There are also pipe fouling, water quality "secondary pollution", so that the residual chlorine in the water is depleted by organic matter, so the total number of bacteria increased, in these bacteria are bacteria, but also on the pipeline corrosion bacteria. Some of these various bacteria seriously affect the water quality, others aggravate the corrosion of pipelines, thus shortening the service life of pipelines. Rigid polyurethane foam is mainly composed of polyhydroxyl compounds and isocyanates. Under the action of catalyst and foa【勝倉管業 高經理13730570531 QQ：2927372564】ming agent, it is formed by addition polymerization and foaming. The main reaction isocyanates react with hydroxyl groups in polyhydroxyl compounds to form polyurethane. The catalysts are mainly tertiary amine and organotin. The robe reacts with isocyanate to react with water to produce carbon dioxide gas and urea. The products such as urea and tertiary amine react with this react【勝倉管業 高經理13730570531 QQ：2927372564】ion. The carbon dioxide produced by the reaction is used for foaming. But the disadvantages of water foaming are expensive isocyanates. Low boiling point fluorochloroalkanes (F-113, etc.) are also commonly used to form foams before gradual solidification by reactive heat vaporization during polymerization. The amount of foaming agent can be determined according to the density of the foam. Polyester. The hydroxyl value of polyester used in rigid polyurethane foam is usually controlled between 300~500. 456 polyester indicators are as follows. Type III fire retardant polyether: three hydroxyl phosphorus containing chlorine fire retardant polyether. Due to the introduction of phosphorus and chlorine in th【勝倉管業 高經理13730570531 QQ：2927372564】e molecular structure, the product has fire resistance. The quality index of type III fire retardant ethers is shown in Table 5 - 2.
