INCONEL? 92 焊絲AWS A5.14，ERNiCrFe-6

INCONEL^?  92 焊絲

INCONEL 92 焊絲主要用于鎢極惰性氣體保護焊、熔化極氣體保護焊等方法焊接奧氏體鋼、鐵素體鋼以及鎳基合金，包括INCONEL系列合金和INCOLOY系列合金與不銹鋼、碳鋼以及MONEL系列合金的焊接，還可用于MONEL系列合金、NICKLE 200合金與不銹鋼的焊接以及不銹鋼和碳鋼的焊接。這種焊絲也可以用于鎳鋼的焊接。

INCONEL 92 焊絲能在很寬的溫度范圍－很低的溫度到1800^oF（980^oC）－提供較高的強度和耐腐蝕能力。當溫度超過1300^oF（700^oC）時，焊縫金屬能產生時效硬化進一步提高強度。

    焊絲可以以線卷或直線狀供貨，并有幾種不同直徑可供選擇，如下表所示:

產品    

供貨

狀態

直線長度--915 mm(36”)或1000 mm(39”)

INCONEL 92 wire is mainly used for tungsten inert gas protection welding, melting polar gas protection welding methods, such as welding austenitic steel, ferritic steel and nickel base alloy, including INCONEL alloy series and INCOLOY series alloy and stainless steel, carbon steel and MONEL alloy welding, can also be used for series of MONEL alloy, NICKLE alloy with the welding of stainless steel and 200 stainless steel and carbon steel welding. This wire can also be used for welding of nickel steel.

INCONEL 92 solders can provide high strength and corrosion resistance at a wide temperature range - very low temperature to 1800oF (980oC). When the temperature is over 1300oF (700oC), weld metal can produce aging hardening and further enhance strength.

AWS A5.14, ernicrfe-6 AMS 5675

ASME specifications Ⅱ, SFA 5.14, UNS N07092 ERNiCrFe - 6

ASME Ⅸ, F - No. 43

MIL - E - 21562 Types MIL - RN6A, MIL - EN6A

Nia -- -- -- -- -- -- -- -- -- -- 67.0 min Cu -- -- -- -- -- -- -- -- -- -- - 0.50 Max

Chemical C -- -- -- -- -- -- -- -- -- -- 0.08 Max Cr -- -- -- -- -- -- -- -- -- - 14.0-17.0

Composition of Mn -- -- -- -- -- -- -- -- -- - 2.0-2.7 Ti -- -- -- -- -- -- -- -- -- -- -- -- - 2.5-3.5

Fe -- -- -- -- -- -- -- -- -- -- 8.0 Max P -- -- -- -- -- -- -- -- -- -- 0.030 Max

S -- -- -- -- -- -- -- -- 0.015 Max other -- -- -- -- -- -- -- -- -- 0.50 Max

Si -- -- -- -- -- -- -- -- -- 0.35 Max

Add a Co

Minimum tensile strength, psi 80,000

Mechanical 552 MPa

Performance extension rate (4d) % 30

The wire can be supplied in a reel or straight line, with several different diameters to choose from, as shown in the following table:

products

Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2

In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125

supply

state

Linear length -915 mm(36 ") or 1000 mm (39)