- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
水處理的方式包括物理處理和化學處理。人類進行水處理的方式已經有相當多年歷史，物理方法包括利用各種孔徑大小不同的濾材，利用吸附或阻隔方式，將水中的雜質排除在外，吸附方式中較重要者為以活性炭進行吸附，阻隔方法則是將水通過濾材，讓體積較大的雜質無法通過，進而獲得較為干凈的水。另外，物理方法也包括沉淀法，就是讓比重較小的雜質浮于水面撈出，或是比重較大的雜質沉淀于下，進而取得。化學方法則是利用各種化學藥品將水中雜質轉化為對人體傷害較小的物質，或是將雜質集中，歷史最久的化學處理方法應該可以算是用明礬加入水中，水中雜質集合后，體積變大，便可用過濾法，將雜質去除。
河南省某設備制造有限公司 酸洗磷化廢水處理工程案例
工程概況
工程名稱：河南省某設備制造有限公司
工程性質：酸洗磷化廢水處理工程
工程范圍：污水處理站1米內的所有內容，包括設備的供貨、指導調試。
排放標準：
該設備處理后水質標準如下表所示《污水綜合排放標準》GB8978-2002一級排放標準執行：
項目 CODCR/（mg/L） BOD5/（mg/L） SS/（mg/L）
進水量
出水量 1500-2000
≤60
500-1000
≤10
200-450
≤10
要求：
（1） 處理工藝技術先進，系統運行經濟安全可靠。
（2） 處理設施高效、節能，管理、運行、維修方便且能長久正常運行。
（3） 構筑物及設備布局要緊湊合理，占地面積小且美觀大方。
（4） 乙方保證：所供設備和配套材料都是全新的、完整的和最新設計的，達到質量標準和滿足安全使用要求。
質量保證
1 賣方保證所提供設備是全新的、在交付時沒有材質或工藝上的缺陷且符合買方提出的技術標準及規范；
2 賣方應保證其出售的設備科提供正常和恰當地使用，并且在經過正確安裝、正常操作和保養的前提下，在設備的壽命期內運轉良好；
3 設備的材料和零部件均應符合或優于買方提出的技術標準及規范。
六 設備的安裝調試驗收
1 設備交貨后，賣方應在買方通知現場具備安裝條件時，在一周或更短的時間內派技術人員到場安裝，并在規定時間內安裝調試完畢，同時賣方負責安裝調試過程中所有因質量缺陷而損壞的零部件免費更換。
2 設備在賣方指導下安裝調試運行后，買方和賣方共同對設備進行安裝調試驗收，若賣方不參與聯合檢驗，則視為同意買方的驗收結果。設備經安裝調試驗收合格后，由雙方共同簽署《設備安裝調試驗收結論單》。
3由賣方負責指導安裝，并負責指導調試，只有經過安裝調試并且技術性能達到合同技術中所述的技術要求后，買方才能接受全部貨物。
山東九洲清環保科技有限公司專業承接各類污水處理工程，生產各種污水處理設備，本公司堅持先分析客戶的原水水質及環境條件，然后再進行有針對性的工藝設計，設立客戶檔案，同時為客戶提供各種水處理工藝的可行性論證，技術咨詢、生產制造、工程安裝、調試培訓等一系列技術服務，并向用戶提供設備終身維護服務。公司以先進的技術、一流的設計、完善的服務期待與國內外各界人士真誠合作。
濟寧天通是一家水處理設備生產和銷售集一體的公司，公司擁有高尖端的技術人才，擁有高素質的工作團隊，可以及時地為客戶提供完善的售后服務。水處理的方式包括物理處理和化學處理。人類進行水處理的方式已經有相當多年歷史，物理方法包括利用各種孔徑大小不同的濾材，利用吸附或阻隔方式，將水中的雜質排除在外，吸附方式中較重要者為以活性炭進行吸附，阻隔方法則是將水通過濾材，讓體積較大的雜質無法通過，進而獲得較為干凈的水。另外，物理方法也包括沉淀法，就是讓比重較小的雜質浮于水面撈出，或是比重較大的雜質沉淀于下，進而取得。化學方法則是利用各種化學藥品將水中雜質轉化為對人體傷害較小的物質，或是將雜質集中，歷史最久的化學處理方法應該可以算是用明礬加入水中，水中雜質集合后，體積變大，便可用過濾法，將雜質去除。
The way water is treated includes physical processing and chemical treatment. The ways in which human water treatment have been years of history, physical methods including the use of a variety of different aperture size, the filter material using adsorption or blocking way, exclude the impurities in the water, the adsorption mode of less important for adsorption on activated carbon, blocking method is through the water, the filter material for large impurity cannot pass, and get more clean water. In addition, the physical method also includes precipitation method, which is to make the impurity of the smaller proportion floating in the water, or the impurities of the larger proportion are deposited in the lower, and thus obtained. Chemical method is to use various chemicals to the water impurities into smaller material harm to the human body, or the impurity concentration, the oldest of the chemical treatment method should be use alum in the water, the water impurities after collection, volume change, used to filter method, remove the impurities.
The case of acid washing and phosphating wastewater treatment project of a equipment manufacturing co., LTD in henan province
Project overview
Project name: henan province equipment manufacturing co. LTD
Engineering properties: acid - washing phosphating wastewater treatment works
Project scope: all contents within 1 meter of sewage treatment station, including equipment supply and guidance debugging.
Emission standards:
The water quality standards of the equipment are shown in the table below: gb8978-2002 primary emission standard:
Project CODCR/(mg/L) BOD5/ (mg/L) SS/(mg/L)
Into the water
Water yield, 1500-2000
60 or less
500-500.
10 or less
200-200.
10 or less
Requirements:
(1) the processing technology is advanced and the system is safe and reliable.
(2) the processing facilities are efficient, energy efficient, management, operation and maintenance are convenient and can be operated for a long time.
(3) the structure and equipment layout should be compact and reasonable, with small area and beautiful appearance.
(4) party b guarantees that the equipment and supporting materials are completely new, complete and newly designed to meet the quality standards and meet the safety requirements.
Quality assurance
1. The seller guarantees that the supplied equipment is completely new and has no material or workmanship defects in the delivery and meets the technical standards and specifications proposed by the buyer;
2. The seller shall ensure that the equipment section for sale is properly and properly used, and that the equipment is properly installed, normal operation and maintenance.
The materials and parts of the equipment shall meet or exceed the technical standards and specifications proposed by the buyer.
Installation and commissioning of equipment
1 after the equipment delivery, the seller shall have the installation conditions at the scene of the buyer's notification, or a shorter period of time in a week to send technical personnel to install, installation and debugging and within the prescribed time to complete, at the same time the seller is responsible for the installation and debugging process all damaged parts free replacement due to quality defects.
2. After installation and commissioning of the equipment under the guidance of the seller, the buyer and the seller jointly install and debug the equipment. If the seller does not participate in the joint inspection, it shall be deemed to agree to the acceptance of the buyer. After the installation and commissioning of the equipment is qualified, the two parties shall jointly sign the acceptance conclusion of the installation and commissioning of the equipment.
3. The seller shall be responsible for the installation and guidance of the installation. Only after installation and debugging and technical performance to meet the technical requirements described in the contract technology, the buyer can accept all the goods.
Shandong jiuzhou qing environmental protection technology co., LTD., professional undertaking various kinds of wastewater treatment engineering, production of sewage treatment equipment, the company adhere to customer first raw water quality and environmental conditions, and then targeted process design, set up the customer file, at the same time providing customers with a variety of water treatment technology feasibility, technical consulting, manufacturing, engineering, installation, debugging, training and a series of technical services, and provide the user with the equipment maintenance services for life. With advanced technology, first-class design and perfect service, we look forward to sincere cooperation with people from all walks of life.
Jining day pass is a set of water treatment equipment production and sales of the company, the company has sophisticated technology talented person, has a high quality work team, can provide customers with perfect after-sales service in a timely manner. The way water is treated includes physical processing and chemical treatment. The ways in which human water treatment have been years of history, physical methods including the use of a variety of different aperture size, the filter material using adsorption or blocking way, exclude the impurities in the water, the adsorption mode of less important for adsorption on activated carbon, blocking method is through the water, the filter material for large impurity cannot pass, and get more clean water. In addition, the physical method also includes precipitation method, which is to make the impurity of the smaller proportion floating in the water, or the impurities of the larger proportion are deposited in the lower, and thus obtained. Chemical method is to use various chemicals to the water impurities into smaller material harm to the human body, or the impurity concentration, the oldest of the chemical treatment method should be use alum in the water, the water impurities after collection, volume change, used to filter method, remove the impurities.
