蒸壓加氣混凝土設備翻轉清理機

產品性能特點：
大小滑車采用導柱導套式結構，齒輪齒條同步，保證其運行同步。液壓系統采用比例閥控制，可以根據運行狀態設置速度及壓力，使翻轉、運行平穩。翻轉架采用 350*200*10 矩形鋼管焊接而成，去應力后整體機加工，保證大小滑車垂直度。 固定側板采用雙油缸夾緊，避免側板傾斜，提高成品率。采用整體鋼結構底座，翻轉機構、動力油缸統一安裝在底座上，避免了在安裝過程中產生的偏差。

The large and small pulleys adopt the structure of guide post and guide sleeve, and the gear and rack are synchronized to ensure the synchronization of their operation. The hydraulic system is controlled by a proportional valve, and the speed and pressure can be set according to the running state, so that it can turn over and run smoothly. The turning frame is welded with 350*200*10 rectangular steel pipes, and is machined as a whole after stress is relieved to ensure the verticality of large and small pulleys. The fixed side plate is clamped by double oil cylinders to avoid the side plate tilting and improve the yield. The integral steel structure base is adopted, and the turning mechanism and the power cylinder are uniformly installed on the base, which avoids the deviation during the installation process.

東岳機械股份有限公司位于山東省沂南縣，總占地面積320.4畝。公司注冊總股本為2.1015億元，股東由4個法人公司151個自然人組成。公司有下設有臨沂東岳新型建材有限公司、臨沂東岳進出口有限公司、臨沂東岳壓力容器設備制造有限公司三個全資子公司。

經營范圍：加氣混凝土設備、切割機、板墻機制造、銷售，砌塊成型機、空心磚機、免燒磚機、攪拌機、粉碎機、制管機、壓力機、制瓦機、農業機械、立式擠壓制管機、起重設備、吊具、壓力容器、叉車、裝載機、黏土磚機、磚機托板銷售：戶外廣告代理、設計、制作發布（上述項目需許可證的，憑有效許可證經營）。（依法須經批準的項目，經相關部門批準后方可開展經營活動）。