PET系列合成紙油墨PET系列合成紙油墨專為PET基材印刷而設計，用于絲網印刷表面處理過的PET透明片材、PET亮銀、亞銀特多龍等，印品具有附著力強、墨層堅韌、氣味低等特點。主要特點 附著牢度優異、高柔韌性、網版穩定性強干燥快速徹底、氣味低。 適用基材 PET透明片材、PET亮銀、PET亞銀特多龍等。 干燥溶劑揮發型自然干燥。在室溫條件和空氣流通較好的前提下，印品一般在30-60分鐘內自然表層干燥，實干24-48小時。 稀釋可加入5-15的PET-180進行稀釋；如工作間溫度較高，為防止糊版，可用部分或全部PET-182慢干稀釋劑代替PET-180稀釋劑。在四色印刷時，油墨中加入5-10的PN893可降低油墨的干性，但對油墨的稀稠度影響不大。清洗 可用PET-185洗網水清洗網版。 罩光 使用PET-827罩光油罩印于其它顏色上，可提高印品光澤，增加耐磨擦性和耐候性。 沖淡使用PET-826（用于專色）或PET-460（用于四色）可沖淡油墨顏色的濃度，提高油墨的光澤和透明性，但油墨的耐候性會相應降低。印刷面積 PET high covering silk screen printingink. PET screenprinting ink is the use of volatile drying low ink high-gradeimported materials, adhesive and goodprintability of PET polyester film. PET series of synthetic paper ink PET series ofsyntheticpaper ink for PET substrate printed design, used for screen printing surfacetreated PET transparent sheet, PET brightsilver, the silver and the dragon, theprinting ink layer with strongadhesion, toughness, low odor. The main characteristics of excellent adhesion, highflexibility, high stability, fast drying thoroughly screen lower odor. For the substrate of transparent PETsheet, PET, PET bright silversilver polyester etc.. Drying solvent naturally dry hair. Thepremise ofcirculation in the room temperature andair,printing in general 30-60 minutes natural surface drying,work 24-48hours. Dilution can join the 5-15 PET-180dilution; such as the working temperature is high, in order toprevent paste version, some or all of the available PET-182 thinner slow dry instead ofPET-180 diluent. In the four colour printing, joined the5-10 PN893 ink can reducetheink dry, but little effect on dilute ink consistency. Cleaningthe availablePET-185 washing network water cleaningscreen. Hood light using the PET-827 varnish cover printed on the other color, can improve the printingluster, increaseabrasionresistance and weather resistance. By usingPET-826 (for color) orPET-460 (for colour) concentration can dilute the inkcolor, improve the ink gloss andtransparency,but the weather resistant ink will be reduced accordingly.The printingare
