油墨特性：
擁有高光高色澤，主要用于金屬表面、白鐵表面、不銹鋼表面、玻璃表面、UV表面、強化表面、電鍍表面等材料上，具有高色澤、高色彩、高遮蓋力、高穩定性、耐酒精及耐磨擦之特點。
印刷：絲印移印均可。
表干及實干時間：表干時間自然揮發5-10分鐘；實干時間在24小時以內(加專用固化劑)。
稀釋及清洗：SV3慢干開油水、UVK1（移印開油水）同時可使用718洗網水清洗。
測試方法（完全干燥后）：
1、3m膠紙粘在畫有百格的油墨表面，45度角迅速拉起不脫油;
2、純度99%的工業酒精，一千克砝碼用棉布包住在油墨表面，以水平力來回拉200次無脫色;
3、 耐磨：橡皮擦500g力水平來回擦500次。
使用方法：
1、使用前應充分攪拌，用后隨時封閉；
2、攪拌時加開油水10-15%，稀釋到印刷粘度如需自干加專用固化劑5%-10%.
3、網板塞網時可用洗網水清洗；
4、不得與其它類型油墨混合使用。
注意事項：
1、塑膠材料的外觀相似，但可能會是不同的材料，客戶需試印確定其符合要求后，再批量印刷；
2、在移印過程中，如出現拉絲或散開，可適當加入一些慢干膏即可;
3、環境溫度過高，將會影響油墨原有質量；
4、根據氣候變化，請遠離火源，陰暗環境下存放。
Since the dry metal series ink printing ink characteristics: have highlights high colour and lustre, mainly used for metal surface, and tin surface, stainless steel surface, glass surface, UV surface, strengthen the surface, electroplating materials such as surface, with its high colour and lustre, high color, high covering power, high stability, resistant to alcohol and friction resistance characteristic. Printing, screen printing moving printing all can. Table dry and work time: dry time table natural volatilize 5-10 minutes; Work in time within 24 hours (plus special curing agent). Dilution and cleaning: SV3 slowly open oil and water, dry UVK1 (moving printing open oil and water) and can use clean water to wash the nets 718. Test method (dry) : 1, 3 m tape is stuck in the picture has the case of printing ink surface, 45 degree Angle quickly pull up not to take off the oil; 2 and purity, 99 � and � � industrial alcohol, a kilogram of Jordan farmar cover with cotton cloth in ink surface, with the level force and 200 times back and forth without decoloring; 3, wear-resisting: the eraser 500 g force level wipe 500 times back and forth. Method of use: 1, before the use should be fully mixing, after using closed at any time; 2 when the oil and water, stir number 10-15 � F � � dilution to printing viscosity should do with the special curing agent 5 � 0 � 20 3, sheet stuffed nets can be used when washing nets water cleaning; 4, not with other kinds of printing ink mixed use.
