電流開關 CS10-R
Current Relay CS10-R
技術數據
Technical data
CS10-R
電源
power supply
AC220V,AC230V,AC240V,AC110V
AC120V,AC127V,50/60Hz
功耗
Power consumption
<1.2W
接線端子
Terminals
Conductors up to 4mm2
防護等級
Protection class
IP30
環境溫度
Ambient temperature
-25 °C to +45°C
使用壽命
Life span
>100,000h
額定電流
Rated current
2.5A
額定動作點
Rated acting point
More than 1/3 selected load lost
響應時間
Response time
<1s
初使化時間
Initial time
<3s
繼電器觸點
Relay contacts
1NO+1NC
繼電器觸點額定開斷容量
Rated contacts switching capacity
AC-15/250V 6A
絕緣強度
Insulating strength
AC2000V, 50Hz, 1Min
安裝位置
Location mounted
As desire
安裝方式
Mount method
Mount at DIN35 rail
外殼材料
Material of enclosure
Insulating material according to DIN7708
The CS10-R current switch can identify losing of 50W load. The selection switch can be set in 50W,100W,150W,300W load position, if more than 1/3 selected load lost, then the current switch’s alarm lamp bright, and output relay’s 1/2 can close, 3/4 can open. The normal lamp bright when the load is normal, output relay’s 1/2 can open, 3/4can close.
The typical application is to monitor the work status of heat-ing element. When the load lose more than 1/3, the current switch will alarm, the alarm indicator will bright, and the con-tacts of relay will switch.
Application
CS10-R電流開關，能識別50W的負載缺失,也就是在50W、100W、150W、300W的四檔選擇里，如果任何一檔的實際應用負載，缺失1/3以上，則電流開關報警指示燈會發紅光，輸出繼電器觸點1/2會閉合，觸點3/4會斷開。如果工作正常，則工作指示燈發綠光，輸出繼電器觸點1/2會斷開，觸點3/4會閉合。
典型的應用場合為監視加熱元件的工作狀態。當加熱元件開路時，電流開關的告警指示燈會亮起，其輔助接點就會輸出告警信號；當組合式加熱元件中部分缺失，電流開關也會告警。
應用場合