江蘇蘇州倍徠斯金屬供應德標34CrNiMo6鍛件，撫順特鋼34CrNiMo6圓鋼，東北特鋼34CrNiMo6高強度材料，34CrNiMo6圓棒價格。34CrNiMo6高強度合金鋼，因其優良的綜合力學性能，廣泛用於製造發動機的凸輪軸及連桿等重要零件，加工性較差，屬於典型的難加工資料.34CrNiMo6 high strength alloy steel, due to its excellent comprehensive mechanical properties, widely used in the manufacture of engine camshaft and connecting rod and other important parts, machining is poor, is a typical difficult to process materials.

34CrNiMo6資料經調質處理後，硬度為36～40HRC，抗拉強度σb為1 100 MPa，伸長率δ為12%，衝擊韌度值ακ為8kg/cm2
熱處理：
34CrNiMo6其調質工藝為850油淬580度回火

34CrNiMo6 after quenching and tempering treatment, hardness of 36 ~ 40HRC, tensile strength, sigma B is 1 100 MPa, elongation was 12%, the impact toughness values of alpha kappa 8kg / cm2
Heat treatment:
34CrNiMo6 its quenching and tempering process for 850 degrees of 580 degrees of oil quenching tempering

歐洲的資源整合來自兩方面。一是充分利用東歐大量低開工率、高資本投入鋼廠；二是借歐共體發展綜合西歐產業資源。在90年代前，每經歷一個完整的行業週期，粗鋼總產量是不斷下降的。德標34CrNiMo6鍛件，撫順特鋼34CrNiMo6圓鋼，東北特鋼34CrNiMo6高強度材料，34CrNiMo6圓棒價格。而在90年代綜合完成後，產量波動上升（圖3）。歐洲通過資源整合，把握90年代起新興市場旺盛需求的機會。Europe's resources integration comes from two aspects. One is making full use of Eastern Europe a lot lower work rate, high capital investment steel; second is through the development of EC integration industry in Western Europe, resource. In the 90 years ago, each experience a complete industry cycle, the total production of crude steel is constantly declining. And after the integration of the 90's, the output fluctuations increased. Europe through the integration of resources, grasp the opportunity of emerging markets in the 90's time.

為何在鋼鐵行業週期的上升階段綜合較為困難？在需求提速，供不應求的市場中，鋼鐵企業更傾向於做大做強，綜合伴隨的巨額法律和交易成本使他們更樂意各自為政。德標34CrNiMo6鍛件，撫順特鋼34CrNiMo6圓鋼，東北特鋼34CrNiMo6高強度材料，34CrNiMo6圓棒價格。這在金融危機前的中國鋼鐵生產體現尤為明顯。需求提速時期，高稅收、高投資的鋼鐵行業成為各地方政府扶持對象，導致產能增速過快，使得需求疲軟之後庫存居高不下。Why the integration of the rise in the steel industry cycle is more difficult? In the demand of the speed, market demand, iron and steel enterprises tend to become bigger and stronger, integration with the huge legal and transaction costs so that they are more willing to fragmented. This is particularly evident in the Chinese iron and steel production before the financial crisis. Demand for speed, high taxes, high investment in the steel industry has become the local government to support the object, leading to the rapid growth of production capacity, so that the demand is weak after high inventory.
此外，能夠減少同行業競爭的綜合往往更易完成，囙此儘管跨國的鋼鐵綜合屢見不鮮，但跨地區的綜合成功率並不高。跨地區的綜合並不會減少被收購企業當地市場的鋼廠數量，甚至還可能加劇競爭。德標34CrNiMo6鍛件，撫順特鋼34CrNiMo6圓鋼，東北特鋼34CrNiMo6高強度材料，34CrNiMo6圓棒價格。例如，巴西國家黑色冶金公司在06-11年提議的5筆跨國收購未完成，其中包括2006年11月嘗試以128.5億收購科勒斯集團，部分原因就是儘管該綜合可以拓展收購方的業務線和國際市場，本就擁擠的歐洲鋼鐵生產卻無利可圖。In addition, to reduce the integration of the industry competition is often more easy to complete, so although the integration of cross-border steel is common, but the success rate of cross regional integration is not high. Cross regional integration does not reduce the number of steel mills in the local market, and may even intensify competition. For example, Brazil country ferrous metallurgy company after SA proposed in 5 pen cross-border acquisitions in unfinished, including November 2006 attempt to 12.85 billion acquisition of Corus group, part of the reason is although the integration can expand the acquirer's line of business and international markets, the crowded European steel production but unprofitable.

德標34CrNiMo6鍛件，撫順特鋼34CrNiMo6圓鋼，東北特鋼34CrNiMo6高強度材料，34CrNiMo6圓棒價格。