- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
斯米克D842鈷基焊條
名稱：堆D842鈷基合金焊條
符合：GB/T984-2001 型號：EDCoCr-D-03
相當：AWS A5.13:2000 型號：ECoCr-B
說明：鈷基4號低碳鈷基鉻鎢合金焊芯堆焊焊條，采用直流反接，堆焊金屬在800℃仍能保持良好的抗熱疲勞性和耐蝕性。
用途：用于高溫條件下承受沖擊和冷熱交錯的工件堆焊，如熱鍛模，閥門密封面等，具有良好的性能。
堆焊層硬度：HRC28-35
許可證號:XK06-009-0124
備注：一口價為1公斤的價格！
包裝：5公斤/盒，20公斤/箱
備注：拍下備注焊條直徑3.2mm/4.0mm
品牌：飛機牌（上海名牌）
廠家：上海斯米克焊材有限公司
注意事項：
1、焊條焊前須經150℃左右烘焙1小時。
2、宜采用小電流、短弧堆焊，以避免增加母材的熔深，降低堆焊合金的性能。
3、根據母材的種類和工件大小，可選擇350-500℃的預熱溫度和350℃的層間溫度進行堆焊。
4、根據工況條件一般選擇600-750℃，保溫1-2小時后隨爐緩冷，或?qū)⒐ぜ糜诟稍锖皖A(yù)熱的沙缸或草灰中緩冷。
|
Category |
Trade- |
Equivalent to China Standard |
Characteristics & application |
Equivalent to AWS |
|
Hard-surfacing 硬 面
堆
焊
|
D 667 |
EDZCr-B-15 |
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part. |
|
|
D 802 |
EDCoCr-A-03 |
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter. |
ECoCr-A |
|
|
D 812 |
EDCoCr-B-03 |
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve. |
ECoCr-B |
|
|
D 822 |
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler. |
|||
|
D 832 |
EDCoCr-C-03 |
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way. |
ECoCr-C |
|
|
D 842 |
EDCoCr-D-03 |
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die. |
