- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
| 產品闡述 | ||
|---|---|---|
|
Control interface unit IDENTControl with PROFIBUS DP interface |
||
| General specifications | ||
|---|---|---|
| Number of read/write heads |
max. 4 alternative 2 read/write heads and 2 trigger sensors |
|
| UL File Number | E87056 | |
| Indicators/operating means | ||
| LEDs 1, 2, 3, 4 |
Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
|
| LED PWR/ERR |
green: power on red: Hardware fault |
|
| LED UL | green: Interface Power ON/OK | |
| LED Bus Error | red: Bus error | |
| LED Data Exch | green: Slave is at state "Data Exchange" | |
| LED DPV1 | Yellow: not used | |
| LC display |
two-line multi-function display with 12 characters per line configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands and addressing |
|
| Button | 4 keys: ESC, up, down and return | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 2 A incl. read/write heads | |
| Power consumption | 3.5 W Without read/write heads | |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff | |
| Interface | ||
| Physical | RS-485 | |
| Protocol | PROFIBUS DP acc. to EN 50170 | |
| Transfer rate |
9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
|
| Compliance with standards and directives | ||
| Standard conformity | ||
| Electromagnetic compatibility | EN 61326:2003 | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
| Climatic conditions |
air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
|
| Shock and impact resistance |
Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
|
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection |
Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M6 earthing screw PROFIBUS: M12 connector, B-coded |
|
| Material | ||
| Housing | powder coated aluminum | |
| Installation | snap-on to 35 mm standard rail or screw fixing | |
| Mass | approx. 1000 g | |
