進口恒溫混水閥
德國雷普LIP恒溫混水閥由中國深圳派克閥門有限公司總代理
德國雷普LIP閥門嚴格按照ISO9001質量管理體系進行生產過程控制，保證閥門的每個組件都達到要求，并進行嚴格的成品測試，從而保證到用戶的每件閥門產品都是合格產品。
Germany LIP valve rep in strict accordance with the ISO9001 quality management system and production process control, to ensure that each component of the valve can meet the requirements, and strict product testing, to ensure that every user to valve products are qualified products.
型號：LIP
德國雷普恒溫混水閥是專為熱水系統研制的配套產品，廣泛應用于太陽能熱水器、集中熱水系統及電熱水器等。
用戶可以根據需要自行調節冷熱水混水溫度，所需溫度可以迅速達到并且穩定下來，保證出水溫度恒定，且不受水溫、流量、水壓變化的影響，解決使用熱水時水溫忽冷忽熱的問題，冷水一旦中斷，熱水自動停止；熱水一旦中斷，冷水也會自動關閉，防燙傷、防冷激。可在家庭生活熱水、飯店、醫院、學校等要求提供穩定供水溫度的中、小型生活熱水系統中使用。
Germany leipold thermostatic mixing valve is designed for the hot water system and auxiliary products, widely used in solar water heater, central hot water system and the electric water heater.
The user can adjust the mixing of hot and cold water temperature according to the need, the required temperature can be achieved quickly and stable, ensure the water temperature constant, and is not affected by water temperature, flow, pressure,
temperature of the solution to the problem sometimes hot and sometimes cold with hot water, cold water in the hot water once broken, automatic stop; hot water once interrupted, cold water will automatically shut down, anti scald, prevent cold shock. In the domestic hot water, hotel, hospital, school and other requirements to provide a stable supply water temperature of the medium and small living hot water system in the.
在恒溫混水閥的混水出口處，裝配有熱敏感溫組件，水溫變化使熱敏組件膨脹或收縮控制閥內閥芯移動，封堵或者開啟冷、熱水的進水口。當溫度調節旋鈕設定某一溫度后，混水閥通過調節進入出水口的冷熱水比例，使出水溫度始終保持恒定。不會受熱水溫度的降低、用水量的增減或水壓變化的影響。
In the mixed water outlet thermostatic mixing valve, fitted with the thermosensitive temperature sensing component, the component temperature thermal expansion or contraction control mobile spool valve, inlet seal or open the cold, hot water. When the temperature control knob to set a temperature, hot and cold water mixing valve through proportional control into the outlet, the outlet temperature is always constant. Not affected by reducing the temperature of hot water, with water or water pressure changes.
進口恒溫混水閥在太陽能系統上的應用Application of import thermostatic valve in the solar system.
太陽能熱水器公司為了使用戶冬天早上能洗上熱水澡，都大大地提高了集熱能力！但冬季的熱量達到了“標準”，夏季、秋季的熱量就會過剩，超高溫熱水輸出的現象就不可避免！造成消費者使用不當而引發的燙傷案例也屢見不鮮。遺憾的是沒有廠家去考慮太陽能熱水器防燙安全的問題，在日照充分或多天不用情況下，落水式太陽能熱水器的最高輸出水溫可以達到100℃，承壓式甚至會更高，因此對選用的熱水管也必須是耐高溫的，這樣不但提高了成本，還留下了隱患。要是應用了恒溫混水閥問題就迎刃而解，不用考慮熱水是80℃還是100℃，只要將恒溫閥設定為40℃，那么就會得到40℃的出水。
Solar water heater company in order to winter morning to wash the hot bath, can greatly improve the heat collecting capacity! But the winter heat to achieve a "standard", the excess heat in summer and autumn will, ultra high temperature hot water output phenomenon is inevitable! Due to improper use of consumers caused by burn cases are not uncommon. Unfortunately there is no manufacturers to consider the safety of the solar water heater hot issues in full sunshine or more days without conditions,
the highest output water temperature water type solar water heater can reach 100 DEG C and the pressure will be even greater, so the choice of hot water pipe must also be resistant to high temperature, which not only improves the the cost, but also left a hidden danger. If the application of thermostatic mixing valve problem is solved, regardless of water is 80 degrees or 100 degrees, as long as the thermostatic valve set at 40 C, 40 C would.
制造標準：美標、國標、德標
產品產地：德國
產品品牌：德國雷普《LIP》
