Casappa KP30.51D0-33S3-LGG/GF-N 潤

Casappa KP30.51D0-33S3-LGG/GF-N 潤滑油泵

12 VDC solenoid can be operated from the cab,

allowing the operator to shift
the pump from the work mode to standby mode. The

rugged 4 bolt mounting
Casappa KP30.51D0-33S3-LGG/GF-N 潤滑油泵can be installed at the PTO or front mounting off

the crankshaft.
MDV Series Dry Valve Pumps
A practical solution to stopping the vehicle &

shifting to engage the PTO, we offer the MDV Dry

Casappa KP30.51D0-33S3-LGG/GF-N 潤滑油泵Valve Pump. Ideal for refuse packers,
snow and ice equipment and many other mobile

Casappa KP30.51D0-33S3-LGG/GF-N 潤滑油泵applications, the MDV can reduce fuel costs and

operator fatigue. Available in
MH51 & MH76 Series with pressure ratings to 2500

psi.
MH Series Dump Pumps
Metaris MH Series dump pumps are known for their

ruggedness, reliability
and interchangeability. Available in both the 101

Remote Mount and the 102
Direct Mount configurations and C or G frames, these

pumps offer cast iron
construction, a variety of displacements and "Air

Shift" capabilities.
Our Dual Pressure dump pumps come equipped with two

relief pressures
on them: high pressure (3000 psi) for Walking Floor?

applications and low
pressure (2000 psi) for dump applications, each is

selectable by
a supplied air switch.
Pump
Series
Displacement
(in3 / cm3) Max RPM Flow at 1000 RPM
(gpm/lpm)
Pressure
(psi)
MHUP 27 6.1 / 102 2500 27 / 102 3000
MHUP 31 7.11 / 117 2500 31 / 117 3000
MHUP 35 8.2 / 132 2400 35 / 132 2750
MHUP 40 9.27 / 151 2300 40 / 151 2750
Pump
Series
Displacement
(in3 / cm3) Max RPM Flow at 1800 RPM
(gpm/lpm)
Pressure
(psi)
MDVL 19 4.46 / 73 3000 19 / 72 3000
MDVL 23 5.2 / 85 2500 23 / 87 2500
MDVL 25 5.73 / 93 2500 25 / 84 2500
MDV 27 6.1 / 102 3000 27 / 102 3000
MDV 31 7.11 / 117 3000 31 / 117 3000
MDV 35 8.2 / 132 3000 35 / 132 3000
MDV 40 9.27 / 151 2500 40 / 151 2500
Pump Series Displacement
(in3/r) Max RPM Flow at 1200 RPM
(gpm)
Pressure
(psi)
MHC-101/102 5.1 to 6.38 1800 26.5 to 33.1 2000 to

2500
MHG-101/102 1.48 to 3.94 1800 7.6 to 20.4 2000 to

2500
Pump Series Displacement
(in3/r) RPM Flow at 1200 RPM
(gpm)
Pressure
(psi)
MHWFD2.0 5.1 1800 26.5 2000 to 3000
Walking Floor? is a registered trademark not owned

by or affiliated with Metaris or Hydraulex Global.
We're Not Just an
Aftermarket Supplier
Get OEM Level Performance with
a Hydraulex Reman
When it comes to providing hydraulic component

solutions, we not only
supply aftermarket products, we also remanufacture

units back to like-new
specifications. Our Hydraulex Reman units offer you

an affordable alternative
to the costly and timely replacement of a new

component. You get the
performance and reliability of a new OEM unit at a

fraction of the cost.
Every Hydraulex Reman unit is quality engineered to

deliver OEM level
performance. All units and parts are thoroughly

inspected, machined and/
or replaced when necessary, and then reassembled by

one of our expert
technicians. Each unit is then tested to OEM

specifications. When you choose
a Hydraulex Reman, you’re getting a top quality,

worry-free product that’s
backed by an industry leading warranty - the same as

new.
Ask us about our Hydraulex Reman line today.
Our already extensive inventory of Hydraulex Reman

units is constantly growing.
Contact us or speak with your sales representative

to check availability for your particular reman

need.
Mobile & Industrial Applications
Pumps
Motors
Valves
Servo Valves
Proportional Valves
Cylinders
www.hydraulex.com Hydraulex Global Genuine

Metaris Product Catalog 11
Hydraulic Orbital Motors
Genuine Metaris Orbital Motors are your best low

speed high torque motor option in an economical
and compact design. Utilizing proven Roller-Star

technology, these motors allow for high efficiency,
smooth operation and a long operational life.
MM Series Orbital Motors
Genuine Metaris Orbital Motors come in a range of

displacements and are
a functional replacement for common motors in the

market today such as
Eaton?/Char-Lynn?, Danfoss?, Parker
? and White?.
Utilizing proven Roller-Star technology, these

motors allow for high efficiency,
smooth operation and a long operational life.
We offer a variety of flange styles to
accommodate a multitude of applications. This
includes 2-Bolt, 4-Bolt, Square, Magneto and
Wheel Mount options.
Our orbital motors come in both spool and
disc valve configurations and are available with
multiple shaft and porting options.
Motor
Series
Displacement
(in3/r)
Displacement
(cm3/r) RPM Flow
(gpm / lpm)
MMPS 3.1 to 24.1 50 to 395 750 to 133 10.0 to 14.0 /

38 to 53
MMRSW 3.1 to 24.1 50 to 395 775 to 150 10.6 to 15.9

/ 40 to 60
MMH 12.2 to 38.4 200 to 630 360 to 100 21.1 / 80
MMW 12.2 to 38.4 200 to 630 360 to 100 21.1 / 80
Motor
Series
Displacement
(in3/r)
Displacement
(cm3/r) RPM Flow
(gpm / lpm)
MMS 4.9 to 29.9 80 to 490 3000 19.8 / 75
MMK 6.7 to 38.1 110 to 625 3000 19.8 to 25.1 / 75 to

95
MMT 11.9 to 60.1 195 to 985 2400 39.6 / 150
MMV 18.9 to 76.3 310 to 1250 2400 42.3 to 52.8 / 160

to 200
12 Hydraulex Global Genuine Metaris Product

Catalog
Hydraulic Power Take-offs
Durability and reliability is what our Power Take-

offs (PTOs) for mobile equipment are built around.
Available in standard and heavy duty models and in 6

or 8 bolt mounting patterns - we have options to
mount on a variety of different transmissions.
MH6, MH8 & MHD8 Series Power Take-offs
The Metaris 6 & 8 Bolt Standard Duty PTO is built to

last. Cast iron construction,
heavy duty output bearings & oversized assembly

bolts provide durability and
reliability. With several