Series MD

Series HP

Nominal bore :
2.5, 4, 6, 10, 16, 20, 32 and 50 mm
Working pressure:
up to 2000 bar (dependent on nominal bore and material), in part also suitable for vacuum
Media:
mostly hydraulic oils, however can also be used for other fluids and gases
Materials:
steel oil burnished,
stainless steel 1.4404/1.4571 or similar
Special features:
unlocking safety device, many types of connection, ring grips for larger nominal bores, ring valves, vibration lock
  

Series CT

Series BF

Nominal bore:
5, 9, 12, 25 and 50 mm
Working pressure:
up to 64 bar (dependent on nominal bore and material)
Media:
water, steam, solvents, acids, bases, oils, all non-
lubricating media, etc.
Materials:
stainless steel 1.4404, 1.4571 or similar
Special features :
Clean break safety coupling with easy cleanable
smooth ball-face outer contour,
can also connected under pressure,
squirt-free, high flow rate, automatic lock
  

Series HC (High Pressure)

Nominal bore:
6, 8, 12, 16 and 20 mm
Working pressure:
Up to 650 bar (dependent on nominal size and material),
partially also suitable for vacuum
Media:
For self-lubricating media, e.g. hydraulic oil.
Materials:
Steel zinc plated, yellow chromated,
locking sleeve: black phosphated
Special features:
Nearly leakage-free disconnection and air inclusion
free connection by means of clean break valves,
automatic lock (one hand operation),
non-squirting operation, also connectable under
residual pressure

  

Series CN

Nominal bore:
25, 40, 50, 80 and 100 mm
Working pressure:
up to 25 bar (connected and/or disconnected),
Media:
water, compressed air, various fluids, fuel, greases /
oils, technical gases
Materials:
stainless steel 1.4404/1.4571 or similar
Special features:
Application in the chemical industry for the loading of
various fluids. A big advantage is the ability to connect
and disconnect long hose lines which are under
pressure (up to 5 bar) without squirting medium.
In case of limited space the type CN-025 can also be
offered without the handwheel and the locking sleeve
can be operated with a hook spanner.

Series CH

Nominal bore:
16, 20 and 25 mm
Working pressure :
Up to 250 bar, connectable under residual pressure
up to 10 bar
Media:
For hydraulic applications
Steel chemically nickel plated
Special features:
Non-squirting clean break screw-type coupling for
hydraulic applications in the heavy industry.
The special round thread of the locking device is
insensitive to pollution and can be cleaned very easy.
Due to the specific transmission ratio of the round
thread as well as the mounting of the screw sleeve the
coupling process can be carried out with very low forc.e

Sterilisable Clean Break Coupling
Type 40-030

Nominal bore:
30 mm
Working pressure :
Up to 16 bar
Media:
Fluids, gases
Materials:
stainless steel 1.4404, 1.4571 or similar
Special features:
Non-squirting clean break coupling for the application
in the pharma industry for the transport of fluids, e.g.

in hose stations.
Few dead spots as well as CIP compatible (Clean-In-
Place) and SIP compatible (Sterilisation-In-Place)

Compressed air spiral hoses

made of polyurethane are offered in the nominal bores 6,5 to 11 mm with lengths of 3000 to 8000 mm.
All compressed air spiral hoses are equipped with a rigid screwing and a buckling protection.

Protection against scratching for series LT

Optional feature for the couplings of series LT used on the tool side
The scratching-protection secures reliably from damages, as it covers all scratching components inclusive hose clamp (for the smooth hose).

Air gun type 95400

Dust caps and dust plugs

Series BF-025 / -050

High temperature couplings

type 11-012 / 11-019

Nominal bore:
12 and 19 mm
Working pressure:
up to16 bar / up to 310°C
Media:
for thermal oil
Materials:
steel oil burnished
Special features:
squirt-free high temperature coupling with automatic lock through double pawl lock; the hand grips are PTFE-protected

Hook-in couplings series EH

Emergency release couplings

High pressure refuelling nozzle HG-004

High pressure emergency release coupling HG-006

Plug connection for paint and lacquer 03-005

Cartridge coupling elements for tool machines series 57 / 85

Nominal bore:
series 57: 6, 8, 12 and 16 mm
series 85: 6 and 10 mm
Media:
hydraulic oil, oil water mixture, air
Working pressure:
up to 350 bar (special design type 85)
Materials:
series 57: stainless steel 1.4104V
series 85: steel oil burnished, partially nickel plated
Special features:
compact catridge coupling elements especially used for the tool change in machining centers.

Clean break couplings type 15-005 / FF-005

Nominal bore:
5 mm
Media:
self-lubricating media (e.g. hydraulic oil)
Working pressure:
up to150 bar
Materials:
steel zinc plated
Special features:
Leak- and squirt-free self sealing coupling with automatic lock

Breath air coupling Series 04-005

Nominal bore:
5 mm
Media:
Luft
Working pressure:
up to 23 bar
Materials:
brass chrome plated
Special features:
coupling one side sealing with automatic lock and integrated automatically engaging tension safety device

Clean break coupling, plastic version

Type CK-G09

Nominal bore:
9 mm
Media:
Cooling walter
Working pressure:
to 16 bar
Materials:
PVDF
Special features:
with safety unlocking device, valves self-sealing on both sides

Quick fit coupling for compact hydraulics in vehicles

Type 07-003

Nominal bore:
3 mm
Media:
hydraulic oil
Working pressure:
to 280 bar
Materials:
brass, stainless steel
Special features:
Quick fit coupling proven in large-scale production. After bringing together the coupling halves, the coupling locks automatically. oil-tight version, no leakage

Serie UM

(Quick couplings
with noninterchangeable
designs)

Nominal bore:
4, 6, 9 and 12 mm
Media:
gases, liquids and vacuum
Working pressure:
to 20 bar
Materials:
stainless steel 1.4404 / 1.4571 or equal, (NW 4 in brass, nickel-plated)
5 different round keys possible
Applications: laboratory and medical equipment (control panels)

Manually operated fluidic multicoupling type 90405, 90408 and 90410

Technical Data:
• number of connections: 4 to 20
• pressure range: up to 10 bar
• diameter: n.b. 2-4 mm